Reliable Juniper JN0-364 Dumps Questions & JN0-364 Training Materials

Many candidates who take the qualifying exams are not aware of our products and are not guided by our systematic guidance, and our users are much superior to them. In similar educational products, the JN0-364 quiz guide is absolutely the most practical. Also, from an economic point of view, our Service Provider Routing and Switching, Specialist (JNCIS-SP) exam dumps is priced reasonable, so the JN0-364 test material is very responsive to users, user satisfaction is also leading the same products. So economical and practical learning platform, I believe that will be able to meet the needs of users. Users can deeply depend on our Service Provider Routing and Switching, Specialist (JNCIS-SP) exam dumps when you want to get a qualification. There may be many problems and difficulties you will face, but believe in our Service Provider Routing and Switching, Specialist (JNCIS-SP) exam dumps if you want to be the next beneficiary, our JN0-364 Quiz guide is not only superior in price than any other makers in the educational field , but also are distinctly superior in the quality of our products.

Juniper JN0-364 Exam Syllabus Topics:

SectionObjectives
Intermediate System to Intermediate System (IS-IS)- Demonstrate knowledge of how to configure, monitor, or troubleshoot IS-IS
  • 1. Troubleshooting tools
  • 2. Interfaces and adjacencies
  • 3. Routing policy application
- Identify the concepts, operation, or functionality of IS-IS
  • 1. Link-state database
  • 2. Metrics
  • 3. Type, length, values (TLVs)
  • 4. Levels and areas
  • 5. IS-IS protocol data units (PDUs)
  • 6. Designated intermediate system (DIS)
  • 7. Adjacencies and neighbors
Border Gateway Protocol (BGP)- Identify the concepts, operation, or functionality of BGP
  • 1. BGP message types
  • 2. BGP route reflection and confederations
  • 3. BGP basic operation
  • 4. Attributes
  • 5. Route selection process
  • 6. IBGP and EBGP functionality and interaction
- Demonstrate knowledge of how to configure, monitor, or troubleshoot BGP
  • 1. Troubleshooting tools
  • 2. Peers and peer groups
  • 3. Routing policy application
IPv6- Identify the concepts, operation, or functionality of IPv6
  • 1. Dynamic routing - OSPFv3, IS-IS, BGP
  • 2. Static routes
  • 3. IPv6 over IPv4 tunneling
- Demonstrate knowledge of how to configure, monitor, or troubleshoot IPv6
Multiprotocol Label Switching (MPLS)- Identify the concepts, operation, or functionality of MPLS CoS processing on Junos devices
  • 1. MPLS packet header
  • 2. MPLS terminology
  • 3. LDP
  • 4. End-to-end packet flow and forwarding
  • 5. Segment routing with MPLS
  • 6. RSVP
  • 7. Labels and the label information base
  • 8. MPLS and routing tables
- Demonstrate knowledge of how to configure, monitor, or troubleshoot MPLS
  • 1. Shortest path segment-routing LSPs
  • 2. RSVP-signaled Label-Switched Paths (LSPs)
  • 3. MPLS forwarding
  • 4. LDP-signaled Label-Switched Paths (LSPs)
Open Shortest Path First (OSPF)- Identify the concepts, operation, or functionality of OSPF
  • 1. Link-state database
  • 2. Router ID
  • 3. OSPF packet types
  • 4. Link-state advertisement (LSA) packet type
  • 5. OSPF area and router types
  • 6. Adjacencies and neighbors
  • 7. Designated router and backup designated router
- Demonstrate knowledge of how to configure, monitor, or troubleshoot OSPF
  • 1. Troubleshooting tools
  • 2. Interfaces and neighbor
  • 3. Routing policy application
Spanning Tree Protocols- Identify the concepts, operation, or functionality of STP
  • 1. STP
  • 2. MSTP
  • 3. VSTP
  • 4. RSTP
- Demonstrate knowledge of how to configure, monitor, or troubleshoot Spanning Tree Protocols
  • 1. STP
  • 2. MSTP
  • 3. VSTP
  • 4. RSTP
Protocol-Independent Routing- Identify the concepts, operation, or functionality of various protocol-independent routing components
  • 1. Filter-based forwarding
  • 2. Routing instances, including routing information base (RIB) (also known as routing table) group
  • 3. Martian addresses
  • 4. Static, aggregate, and generated routes
  • 5. Load balancing
- Demonstrate knowledge of how to configure, monitor, or troubleshoot various protocol-independent routing components
  • 1. Filter-based forwarding
  • 2. Static, aggregate, and generated routes
  • 3. Load balancing
Layer 2 Bridging or VLANs- Identify the concepts, operation, or functionality of Layer 2 bridging for the Junos OS
  • 1. Provider bridging (Q-in-Q tunneling)
  • 2. Virtual Switches
  • 3. Service provider switching platforms
  • 4. Frame processing
  • 5. Bridging elements and terminology
- Demonstrate knowledge of how to configure, monitor, or troubleshoot Layer 2 bridging or VLANs
  • 1. IRB
  • 2. Interfaces and ports
  • 3. Provider bridging
  • 4. VLANs
- Identify the concepts, benefits, or functionality of VLANs
  • 1. Integrated Routing and Bridging (IRB)
  • 2. Port modes
  • 3. Tagging

>> Reliable Juniper JN0-364 Dumps Questions <<

JN0-364 Training Materials - Training JN0-364 Solutions

You can install and use Test4Engine Juniper JN0-364 exam dumps formats easily and start Service Provider Routing and Switching, Specialist (JNCIS-SP) exam preparation right now. The Test4Engine JN0-364 desktop practice test software and web-based practice test software both are the mock JN0-364 exam that stimulates the actual exam format and content. With the Test4Engine JN0-364 Exam Questions you will get to understand JN0-364 exam structure, difficulty level, and time constraints. Get any Test4Engine Service Provider Routing and Switching, Specialist (JNCIS-SP) exam questions format and start Juniper JN0-364 exam preparation today.

Juniper Service Provider Routing and Switching, Specialist (JNCIS-SP) Sample Questions (Q92-Q97):

NEW QUESTION # 92
When considering BGP route propagation, which two statements are correct? (Choose two.)

Answer: C,D


NEW QUESTION # 93
During OSPF neighbor establishment, which packet type is used to describe the contents of the link-state database?

Answer: D

Explanation:
The Database Description packet is used during OSPF neighbor establishment to summarize the contents of a router's link-state database. It contains headers of the LSAs so neighboring routers can compare databases and determine which LSAs need to be requested to synchronize their databases.


NEW QUESTION # 94
Referring to the exhibit, where should next-hop-self-policy be applied to alter the next-hop value?

Answer: B

Explanation:
The next-hop-self-policy policy is used to alter the next-hop attribute of BGP routes. When you apply it as an export policy to an external BGP (eBGP) group, it changes the next-hop attribute of the routes being advertised to eBGP neighbors so that the next-hop IP address is the IP address of the router itself. This ensures that the eBGP neighbors use the local router as the next hop to reach these routes.


NEW QUESTION # 95
You are troubleshooting two OSPF routers that have an adjacency that remains in the ExStart state. What would cause this problem?

Answer: D

Explanation:
The problem occurs most frequently when you attempt to run OSPF between a Cisco router and another vendor router. The problem occurs when the maximum transmission unit (MTU) settings for neighboring router interfaces do not match. If the router with the higher MTU sends a packet larger that the MTU set on the neighboring router, the neighbor router ignores the packet.
A mismatched Maximum Transmission Unit (MTU) setting on OSPF interfaces can cause routers to get stuck in the ExStart state. OSPF requires that both sides of a link have the same MTU to form a full adjacency.


NEW QUESTION # 96
In IS-IS, what would you use to control which external routes are installed in the routing table?

Answer: C

Explanation:
In Junos OS, the flow of routing information is managed by policies that sit between the protocol's database (the RIB-In/LSDB) and the main routing table (inet.0). Understanding the direction of these policies is critical for correct configuration.
Animport policy (Option B)is used to control the movement of routes from a routing protocol into the routing table. According to Juniper Service Provider documentation, even though IS-IS is a link-state protocol that requires all routers in an area to have an identical Link-State Database (LSDB), animport policycan be used to filter which of those validated routes are actually placed into inet.0 for forwarding. For external routes (routes leaked into IS-IS from other areas or protocols), an import policy allows an administrator to selectively accept or reject prefixes based on specific criteria like prefix-lists or community tags.
It is important to distinguish this from anexport policy (Option A). In Junos, an export policy is used to take routesalready inthe routing table and push themoutto a protocol to be advertised to neighbors. For example, you would use an export policy to redistribute static routes into IS-IS.Route preference (Option C)is a global value used to select between different protocols for the same prefix, and theinterface metric (Option D)is used by the SPF algorithm to calculate the shortest path within the IS-IS database itself. Therefore, to specifically control which learned external routes are "installed" into the forwarding table, theimport policyis the correct tool.


NEW QUESTION # 97
......

For candidates who will buy JN0-364 learning materials online, they may care more about the quality of the exam dumps. We have a professional team to collect the latest information of the JN0-364 exam dumps, therefore the quality can be guaranteed. Moreover, we have online and offline chat service stuff, who have professional knowledge for JN0-364 Learning Materials. If you have any questions, you can consult us. We will give you reply as soon as possible. Free demo for JN0-364 exam dumps will also be offered, and you can have a try before purchasing.

JN0-364 Training Materials: https://www.test4engine.com/JN0-364_exam-latest-braindumps.html