Best Preparation Material For The Juniper JN0-364 Exam Questions from TestPassKing

With more than thousands of satisfied applicants in multiple countries, we guarantee that you will clear the Juniper JN0-364 exam as quickly as possible by using our product. In this way, Exams.SOlutions save you time and money. In addition to all these excellent offers, in any case despite properly studying with JN0-364 Practice Test material.

Juniper JN0-364 Exam Syllabus Topics:

SectionObjectives
Layer 2 Bridging or VLANs- Identify the concepts, operation, or functionality of Layer 2 bridging for the Junos OS
  • 1. Provider bridging (Q-in-Q tunneling)
  • 2. Virtual Switches
  • 3. Bridging elements and terminology
  • 4. Frame processing
  • 5. Service provider switching platforms
- Demonstrate knowledge of how to configure, monitor, or troubleshoot Layer 2 bridging or VLANs
  • 1. Provider bridging
  • 2. VLANs
  • 3. Interfaces and ports
  • 4. IRB
- Identify the concepts, benefits, or functionality of VLANs
  • 1. Tagging
  • 2. Port modes
  • 3. Integrated Routing and Bridging (IRB)
Open Shortest Path First (OSPF)- Demonstrate knowledge of how to configure, monitor, or troubleshoot OSPF
  • 1. Interfaces and neighbor
  • 2. Routing policy application
  • 3. Troubleshooting tools
- Identify the concepts, operation, or functionality of OSPF
  • 1. Link-state database
  • 2. Router ID
  • 3. OSPF area and router types
  • 4. OSPF packet types
  • 5. Adjacencies and neighbors
  • 6. Designated router and backup designated router
  • 7. Link-state advertisement (LSA) packet type
Intermediate System to Intermediate System (IS-IS)- Identify the concepts, operation, or functionality of IS-IS
  • 1. Link-state database
  • 2. Levels and areas
  • 3. Metrics
  • 4. Designated intermediate system (DIS)
  • 5. Adjacencies and neighbors
  • 6. IS-IS protocol data units (PDUs)
  • 7. Type, length, values (TLVs)
- Demonstrate knowledge of how to configure, monitor, or troubleshoot IS-IS
  • 1. Interfaces and adjacencies
  • 2. Routing policy application
  • 3. Troubleshooting tools
Protocol-Independent Routing- Demonstrate knowledge of how to configure, monitor, or troubleshoot various protocol-independent routing components
  • 1. Filter-based forwarding
  • 2. Static, aggregate, and generated routes
  • 3. Load balancing
- Identify the concepts, operation, or functionality of various protocol-independent routing components
  • 1. Filter-based forwarding
  • 2. Static, aggregate, and generated routes
  • 3. Routing instances, including routing information base (RIB) (also known as routing table) group
  • 4. Load balancing
  • 5. Martian addresses
IPv6- Demonstrate knowledge of how to configure, monitor, or troubleshoot IPv6
- Identify the concepts, operation, or functionality of IPv6
  • 1. Static routes
  • 2. Dynamic routing - OSPFv3, IS-IS, BGP
  • 3. IPv6 over IPv4 tunneling
Spanning Tree Protocols- Identify the concepts, operation, or functionality of STP
  • 1. MSTP
  • 2. STP
  • 3. RSTP
  • 4. VSTP
- Demonstrate knowledge of how to configure, monitor, or troubleshoot Spanning Tree Protocols
  • 1. MSTP
  • 2. STP
  • 3. RSTP
  • 4. VSTP
Multiprotocol Label Switching (MPLS)- Identify the concepts, operation, or functionality of MPLS CoS processing on Junos devices
  • 1. MPLS and routing tables
  • 2. RSVP
  • 3. MPLS terminology
  • 4. LDP
  • 5. Labels and the label information base
  • 6. Segment routing with MPLS
  • 7. MPLS packet header
  • 8. End-to-end packet flow and forwarding
- Demonstrate knowledge of how to configure, monitor, or troubleshoot MPLS
  • 1. LDP-signaled Label-Switched Paths (LSPs)
  • 2. RSVP-signaled Label-Switched Paths (LSPs)
  • 3. Shortest path segment-routing LSPs
  • 4. MPLS forwarding
Border Gateway Protocol (BGP)- Identify the concepts, operation, or functionality of BGP
  • 1. BGP basic operation
  • 2. BGP message types
  • 3. Route selection process
  • 4. BGP route reflection and confederations
  • 5. IBGP and EBGP functionality and interaction
  • 6. Attributes
- Demonstrate knowledge of how to configure, monitor, or troubleshoot BGP
  • 1. Routing policy application
  • 2. Troubleshooting tools
  • 3. Peers and peer groups

>> JN0-364 Exam Score <<

Test JN0-364 Sample Online, Accurate JN0-364 Test

You can first download TestPassKing's free exercises and answers about Juniper certification JN0-364 exam as a try, then you will feel that TestPassKing give you a reassurance for passing the exam. If you choose TestPassKing to provide you with the pertinence training, you can easily pass the Juniper Certification JN0-364 Exam.

Juniper Service Provider Routing and Switching, Specialist (JNCIS-SP) Sample Questions (Q159-Q164):

NEW QUESTION # 159
You are the administrator for two Junos routers called R1 and R2. These two routers are directly connected to each other. These two routers run IS-IS and BFD. R1 is configured to send BFD packets every 300 milliseconds. R2 is configured to send BFD packets every 400 milliseconds. In this situation, what is the expected outcome?

Answer: D

Explanation:
In the context of Juniper Networks High Availability,Bidirectional Forwarding Detection (BFD)is a lightweight protocol designed to provide fast failure detection for the forwarding path. Unlike the slow "hello" mechanisms found in IGPs like OSPF or IS-IS, BFD can detect link or neighbor failures in sub-second intervals.
According to Juniper Networks technical documentation, BFD operates through a negotiation process. When two routers establish a BFD session, they exchange their locally configuredMinimum Transmit Intervaland Minimum Receive Intervalwithin the BFD control packets. The fundamental rule of BFD negotiation is that the routers must agree on a common timing value that accommodates the slower of the two devices to ensure stability and prevent "false positives" (detecting a failure when none exists simply because one router cannot keep up with the processing speed).
In this scenario, R1 expects to send at 300ms, while R2 is configured for 400ms. During the handshake, R1 informs R2 it is capable of 300ms, but R2 informs R1 it can only support a minimum of 400ms.
Consequently, the routers will negotiate to use theslowest of the two rates (400ms). Specifically, the transmission interval of one router is matched to the receive interval of the other. By choosing the highest common denominator (the slowest rate), the BFD session ensures that both routers have sufficient time to process incoming control packets. This negotiation allows BFD to be highly flexible in heterogeneous environments where different hardware platforms may have varying CPU capabilities for handling rapid heartbeat packets.


NEW QUESTION # 160
What prevents routing loops in a single-area OSPF network?

Answer: C

Explanation:
OSPF uses the Dijkstra shortest path first (SPF) algorithm to calculate loop-free paths through the network based on the link-state database. Because every router has a synchronized view of the network topology and independently runs the SPF algorithm, the resulting routing table calculations inherently prevent routing loops.


NEW QUESTION # 161
Which new field is added to an IPv6 header as compared to IPv4?

Answer: A

Explanation:
The IPv6 header includes a new field that is not found in the IPv4 header, called the flow label.
The flow label in IPv6 is used to identify packets that require special handling by routers for quality of service (QoS) or other reasons, allowing these packets to be handled efficiently as they move through the network.


NEW QUESTION # 162
Exhibit:
user@R1> show route 10.16.2.0/23 exact detail
inet.0: 12 destinations, 12 routes (11 active, 0 holddown, 1 hidden)
10.16.2.0/23 (1 entry, 1 announced)
*Aggregate Preference: 130
Next hop type: Reject
Address: 0x8f3fd44
Next-hop reference count: 2
State: <Active Int Ext>
Age: 1:39:21
Task: Aggregate
Announcement bits (1): 0-KRT
AS path: I (LocalAgg)
Flags: Depth: 0 Active
AS path list:
AS path: I Refcount: 2
Contributing Routes (2):
10.16.2.0/24 proto Direct
10.16.3.0/24 proto Direct
Which destination IP address will be matched by the aggregate route shown in the exhibit?

Answer: C

Explanation:
In the Juniper Networks Junos operating system,aggregate routesare used to represent a group of more specific routes with a single, shorter prefix. This technique is essential for reducing the size of routing tables and minimizing the volume of routing updates sent to neighbors. According to Juniper technical documentation, for a destination IP address to "match" a specific route, it must fall within the range defined by the network address and its associated CIDR mask.
The provided exhibit shows a detailed lookup for the aggregate route$10.16.2.0/23$. To determine the range of IP addresses covered by a $/23$ mask, we examine the binary representation of the third octet. A $/23$ mask means the first 23 bits are fixed. For the address $10.16.2.0$:
* The first two octets ($10.16$) are fixed.
* The third octet ($2$) is $00000010$ in binary.
* The 23rd bit is the second-to-last bit of this octet.
* The $/23$ range allows the 24th bit (the last bit of the third octet) and all 8 bits of the fourth octet to vary.
This results in a range where the third octet can be either $2$ ($00000010$) or $3$ ($00000011$). Therefore, the aggregate route $10.16.2.0/23$ covers all IP addresses from$10.16.2.0$ to $10.16.3.255$. The exhibit further confirms this by listing the "Contributing Routes": $10.16.2.0/24$ and $10.16.3.0/24$.
Analyzing the provided options against this range:
* 10.16.3.79 (Option A):This address falls squarely within the $10.16.2.0$ to $10.16.3.255$ range.
* 10.16.0.4 (Option B):This address falls in the $10.16.0.0/23$ range ($0.0$ to $1.255$).
* 10.16.4.183 (Option C):This address falls in the $10.16.4.0/23$ range ($4.0$ to $5.255$).
* 10.16.1.214 (Option D):This address also falls in the $10.16.0.0/23$ range.
Consequently,10.16.3.79is the only destination listed that matches the aggregate route shown. It is also important to note theNext hop type: Rejectin the exhibit; this means that if a packet matches the aggregate but does not match any of the more specific contributing routes, the router will drop the packet and send an ICMP unreachable message to the source.


NEW QUESTION # 163
Which two statements are correct about TLVs in IS-IS? (Choose two.)

Answer: A,D

Explanation:
In the IS-IS protocol,TLVs (Type, Length, Value)are the fundamental building blocks used to carry information withinLink-State PDUs (LSPs). Unlike some other protocols that have a fixed, rigid packet format, IS-IS was designed from the ground up to be modular and extensible. This extensibility is achieved through the use of TLVs, which allow the protocol to carry different types of data without requiring changes to the core protocol state machine.
According to Juniper Networks technical documentation,TLVs allow flexible encoding of routing information (Option C). Each TLV specifies the "Type" of information it carries (such as neighbor information or IP reachability), the "Length" of that information, and the "Value" (the actual data). This architecture is what allowed IS-IS to easily support IPv6 by simply adding new TLVs (like TLV 236 for IPv6 reachability) without redesigning the protocol. It also supports Traffic Engineering (TE) extensions used in MPLS environments by adding TLVs that describe link bandwidth and administrative groups.
Furthermore, a singleLSP can contain multiple TLVs (Option D). When a Juniper router generates an LSP, it packs all the necessary information-such as the router's area addresses, its neighbors, and its local interface prefixes-into various TLVs and places them into a single PDU. If the amount of information exceeds the Maximum Transmission Unit (MTU) of the interface, the router will generate additional LSPs (fragmented LSPs) to carry the remaining TLVs.
Options A and B are incorrect because restricting an LSP to a single TLV would make the protocol incredibly inefficient, and the very nature of IS-IS is its ability to support multiple network layer protocols (not just IPv4) through its agnostic TLV-based transport.


NEW QUESTION # 164
......

Our JN0-364 study materials can satisfy the wishes of our customers for high-efficiency and client only needs to spare little time to prepare for the JN0-364 test and focus their main attentions on their major things. As a leader in the career, we have been studying and doing researching on the JN0-364 Practice Braindumps for over ten year. We have helped tens of thousands of the candidates successfully passed the exam and achieved their dreams.

Test JN0-364 Sample Online: https://www.testpassking.com/JN0-364-exam-testking-pass.html