New JN0-683 Exam Simulator & Sample JN0-683 Questions Answers

BONUS!!! Download part of PassSureExam JN0-683 dumps for free: https://drive.google.com/open?id=1EJ2MFg_6Fv2fbSoq0h8hhVKNeBsJPwis

It is similar to the JN0-683 desktop-based software, with all the elements of the desktop practice exam. This mock exam can be accessed from any browser and does not require installation. The Juniper JN0-683 questions in the mock test are the same as those in the real exam. And candidates will be able to take the web-based Juniper JN0-683 Practice Test immediately through any operating system and browsers.

Juniper JN0-683 Exam Syllabus Topics:

SectionObjectives
Topic 1: VXLAN- Configuration and Troubleshooting
  • 1. Configuring, monitoring, or troubleshooting VXLAN
- VXLAN Concepts
  • 1. VXLAN control planes
  • 2. Data plane
Topic 2: EVPN-VXLAN Signaling- Configuration and Troubleshooting
  • 1. Configuring, monitoring, or troubleshooting EVPNs
- EVPN Concepts
  • 1. Route types
  • 2. Symmetric routing
  • 3. EVPN architectures (CRB and ERB)
  • 4. Multiprotocol BGP (MBGP)
  • 5. EVPN multicast
  • 6. MAC learning
Topic 3: Data Center Deployment and Management- Data Center Management Concepts
  • 1. Analytics (telemetry)
  • 2. Monitoring
- Data Center Deployment Concepts
  • 1. Zero-touch provisioning (ZTP)
  • 2. Dynamic Host Configuration Protocol (DHCP)
Topic 4: Data Center Multitenancy and Security- Security Concepts
  • 1. Group-based policy (GBP)
  • 2. Filter-based forwarding
- Architectures
  • 1. Tenant traffic isolation (Layer 3 or Layer 2)
  • 2. Single tenant and multitenant architectures
  • 3. Multitenancy (for example, routing instances)
Topic 5: Layer 3 Fabrics- IP Fabric Concepts
  • 1. IP fabric Class of Service (RDMA/RoCE)
  • 2. IP fabric scaling
  • 3. IP fabric routing
  • 4. IP fabric architecture
  • 5. IP fabric best practices
- Configuration and Troubleshooting
  • 1. Configuring, monitoring, or troubleshooting an IP fabric
Topic 6: Data Center Interconnect- DCI Concepts
  • 1. EVPN-signaled VXLAN for DCI
  • 2. Interconnect network types
  • 3. Layer 2 and Layer 3 stretch
  • 4. Stitching
- Configuration and Troubleshooting
  • 1. Configuring, monitoring, or troubleshooting DCI

>> New JN0-683 Exam Simulator <<

Sample JN0-683 Questions Answers - New JN0-683 Dumps Ppt

Just choose the right PassSureExam Data Center, Professional (JNCIP-DC) Questions formats and download quickly and start JN0-683 exam preparation without wasting further time. The countless JN0-683 exam candidates have already passed their dream Juniper JN0-683 Certification Exam and they all have got help from PassSureExam JN0-683 exam questions. You can also trust PassSureExam JN0-683 exam practice test questions and start preparation right now.

Juniper Data Center, Professional (JNCIP-DC) Sample Questions (Q49-Q54):

NEW QUESTION # 49
Click the Exhibit button.

Referring to the configuration shown in the exhibit, assume that there is no external router present and that the configuration is fabric-only.
Which two statements are true about the example configuration? (Choose two.)

Answer: A,C

Explanation:
The exhibit shows configurations for two VRFs (Customer_A and Customer_B) with specific VLANs and VNIs assigned. Each VRF has interfaces (IRBs) associated with particular VLANs.
Option B: VLAN 400 (irb.400) is part of Customer_B, and there is no direct connection or routing between Customer_A and Customer_B in the configuration provided. Therefore, devices in irb.400 cannot communicate directly with devices in the Customer_A routing instance.
Option D: Since irb.400 (VLAN 400) and irb.800 (VLAN 800) are part of the same routing instance (Customer_B), they can communicate over the fabric using VXLAN encapsulation.


NEW QUESTION # 50
Click the Exhibit button.

The 192.168.0.0/24 route is being advertised into your IP fabric by the leaf device in AS 65512.
In this scenario, which two statements are correct? (Choose two.)

Answer: A,B

Explanation:
The spines learn 192.168.0.0/24 from the leaf over an eBGP session, and Junos will accept and install received BGP routes by default. However, Junos does not advertise routes to BGP peers unless an export policy explicitly permits them, so the spines will not advertise that route onward to the other leaf peers by default.


NEW QUESTION # 51
A local VTEP has two ECMP paths to a remote VTEP.
Which two statements are correct when load balancing is enabled in this scenario? (Choose two.)

Answer: A,D

Explanation:
The source port in the UDP header is used to load balance VXLAN traffic: In an ECMP (Equal-Cost Multi-Path) scenario with VXLAN, the source port in the UDP header is one of the fields used to hash the traffic and determine which path to use. This helps distribute traffic across multiple equal-cost paths between VTEPs.
The inner packet fields are used in the hash for load balancing: For VXLAN traffic, the inner packet fields (such as the inner source and destination IP addresses, and sometimes the inner VLAN) are included in the hash calculation to determine the forwarding path. This allows for more effective load balancing across the available paths.


NEW QUESTION # 52
Click the Exhibit button.

Referring to the exhibit, data center DC1 has two pods in the same broadcast domain. You want to forward multicast traffic to only one host that is interested in receiving the multicast traffic.
In this scenario, which EVPN route type would be required to accomplish this task?

Answer: C

Explanation:
Selective multicast forwarding (sending multicast only to receivers that joined a specific source/group) requires advertising receiver interest for an (S,G) flow in EVPN so the fabric builds a multicast forwarding state only toward the interested host, instead of flooding multicast broadly.


NEW QUESTION # 53
You are implementing seamless stitching between two data centers and have a proposed configuration for a border leaf device.
In this scenario, which two statements are correct? {Choose two.)

Answer: B,D

Explanation:
When implementing seamless VXLAN stitching between two data centers, the Ethernet Segment Identifier (ESI) must match in both data centers to ensure that the same multi-homed segment is recognized consistently across the environments. This allows seamless failover and redundancy. However, the translation VNI (Virtual Network Identifier) must be different in each data center because VXLAN stitching involves mapping different VNIs to enable interconnectivity between distinct VXLAN domains.
If the same translation VNI is used in both data centers, there would be no differentiation between network segments, leading to potential routing and forwarding issues. Keeping them different ensures proper traffic isolation and mapping.


NEW QUESTION # 54
......

You always need actual and updated JN0-683 exam questions to prepare the test successfully in less time. If you don't study with real Data Center, Professional (JNCIP-DC) (JN0-683) questions, you will ultimately fail and waste your money and time. To save yourself from this loss, you just need to prepare with updated Data Center, Professional (JNCIP-DC) (JN0-683) exam questions of PassSureExam.

Sample JN0-683 Questions Answers: https://www.passsureexam.com/JN0-683-pass4sure-exam-dumps.html

2026 Latest PassSureExam JN0-683 PDF Dumps and JN0-683 Exam Engine Free Share: https://drive.google.com/open?id=1EJ2MFg_6Fv2fbSoq0h8hhVKNeBsJPwis