Our VNX301 learning materials provide multiple functions and considerate services to help the learners have no inconveniences to use our product. We guarantee to the clients if only they buy our VNX301 study materials and learn patiently for some time they will be sure to pass the VNX301 test with few failure odds. The price of our product is among the range which you can afford and after you use our study materials you will certainly feel that the value of the product far exceed the amount of the money you pay. Choosing our VNX301 Study Guide equals choosing the success and the perfect service.
| Certification Vendor: | Versa Networks |
|---|---|
| Exam Name: | Versa Certified Administrator - SD-WAN Specialist |
| Exam Number: | VNX301 |
| Real Exam Qty: | 60 |
| Exam Duration: | 90 minutes |
| Available Languages: | English |
| Exam Format: | Multiple Select, Multiple Choice |
| Exam Price: | $150 USD |
| Passing Score: | Not officially published |
| Certificate Validity Period: | 2 years |
| Related Certifications: | Versa Certified SD-WAN Associate (VNX100) |
| Recommended Training: | Versa Advanced Services Training Versa Secure SD-WAN Configuration and Administration |
| Exam Registration: | Versa Academy Certification Page Kryterion Testing Services |
| Sample Questions: | Versa Networks VNX301 Sample Questions |
| Exam Way: | Online proctored or onsite testing center via Kryterion |
| Pre Condition: | Must hold Versa Certified SD-WAN Associate (VNX100); 1+ year hands-on experience recommended |
| Official Syllabus URL: | https://academy.versa-networks.com/certification-vnx300 |
>> Latest VNX301 Guide Files <<
To effectively getting ready for Versa Networks VNX301 test, do you know what tools are worth using? Let me tell you. Real4exams Versa Networks VNX301 pdf dumps are the most credible. The exam dumps is rare certification training materials which are researched by IT elite. Real4exams VNX301 braindump has a high hit rate. 100% sail through your exam. This is because IT experts can master the question point well, so that all questions the candidates may come across in the actual test are included in Real4exams exam dumps. Is it amazing? But it is true. After you use our dumps, you will believe what I am saying.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
NEW QUESTION # 60
You are configuring a CGNAT rule for branch internet access and want to verify which access-list entry will match traffic before translation. Which information is shown by the CGNAT ACL command?
Answer: B
Explanation:
The correct answer is A . Versa CGNAT troubleshooting documentation shows the command show cgnat acl info < tenant-id > for viewing CGNAT access lists used for traffic matching. The example output includes columns such as ACL handle , RuleId , Category , Precedence , VRF , Source IP , and Destination IP . It also shows tenant ID and total filters.
This command is useful when a CGNAT rule exists in configuration but sessions are not being translated. By checking the ACL output, the administrator can confirm whether the correct source prefix, destination prefix, VRF, and rule precedence are actually programmed in the dataplane. If the wrong VRF or subnet is shown, the rule may never match the intended traffic.
System uptime and CPU usage are operational health indicators. SLA metrics are SD-WAN path- quality values. BGP AS path and local preference are routing attributes. None of these directly show CGNAT access-list match programming.
NEW QUESTION # 61
A branch using DIA with CGNAT reports that new internet sessions intermittently fail. CGNAT pool counters show increasing out-of-ports errors, while out-of-address errors remain zero. What is the most likely problem?
Answer: D
Explanation:
The correct answer is A . Versa CGNAT troubleshooting documentation includes per-pool and resource counters that show allocation behavior and failures. The counters include values such as bindings allocated, bindings freed, allocation failures, out-of-address errors, and out-of-ports errors. It also shows that CGNAT source-port resources are divided and distributed to worker threads by Versa RFD/RFM, and that allocated source-port ranges can be viewed using show rfm table src-port allocated.
If out-of-ports errors increase while out-of-address errors remain zero, the pool still has usable translated IP addresses, but the available port resource for NAT bindings is exhausted. This commonly occurs when too many concurrent sessions share a limited public IP or source-port range. The corrective action would be to expand the NAT resource, add more public translated IPs, adjust port allocation, or reduce excessive session usage.
A missing NAT IP pool would more likely produce out-of-address problems. A wrong zone match might prevent translation entirely, and OSPF in the LAN VR is unrelated to CGNAT port-resource exhaustion.
NEW QUESTION # 62
A branch device has completed Stage 3 onboarding. Which set of tunnels or sessions should exist after the device becomes fully operational in the customer SD-WAN network?
Answer: D
Explanation:
The correct answer is A . In Versa Secure SD-WAN onboarding, the branch moves through three staging phases before becoming fully operational. Versa documentation states that in Stage 3 , Versa Director pushes the stage-three configuration to the branch device over the IKE session and reboots the branch. After this stage, the branch becomes fully operational and is part of the customer SD-WAN network. At this point, IKE and IPsec sessions are created between the branch and Controller , and VXLAN and ESP sessions are created between branch to branch .
This distinction is important because the Controller connection is used for SD-WAN control-plane functions, while branch-to-branch overlay communication uses tunnel encapsulation for data forwarding. The documentation also notes that branch-to-branch ESP is maintained using a lightweight DH key-pair proprietary protocol.
Options B, C, and D are incorrect. HTTPS to Director alone does not represent the complete SD-WAN operational tunnel state. BGP to Analytics is not the required operational tunnel set. GRE-only tunnels without IPsec do not match the Versa Stage 3 SD-WAN tunnel behavior described in the staging documentation.
NEW QUESTION # 63
You are onboarding a branch with one WAN and one LAN interface. After a successful branch activation, the branch is not able to reach the Versa Controller. You realize that the WAN gateway IP address originally entered under the Device Bind Data menu in Versa Director is incorrect. Which action will you perform to solve the problem?
Answer: D
Explanation:
The correct action is to update the WAN gateway IP address in Device Bind Data and onboard the branch appliance again. Device Bind Data supplies site-specific values, such as WAN interface addressing and gateway information, that are merged with the workflow and template configuration during onboarding. If the wrong WAN gateway is entered, the branch may activate successfully from a workflow perspective, but the resulting WAN routing configuration is incorrect. As a result, the branch cannot establish proper transport reachability to the Controller. Versa troubleshooting documentation explains that, after establishing transport connectivity from a branch to a Controller, at least one WAN interface must be available, and the branch then establishes IKE-based IPsec connectivity to the Controller. If that IKE/IPsec connectivity fails, the Controller- facing ptvi interface remains down.
Changing the configuration only from the Appliance context is not the best answer because the incorrect value originated in the bind-data source used for provisioning. Modifying it manually from the branch CLI is also not recommended because the device is managed by Versa Director and template-driven configuration. Resetting the device does not automatically discover or "ping" the correct gateway. The correct remediation is to fix the bind data and repeat onboarding so the branch receives the correct generated configuration.
NEW QUESTION # 64
Examine the exhibit below.
Spoke1 and Spoke2 are part of Spoke-to-Hub-Only spoke group, the hub is advertising a default route to both the spokes.
Referring to the exhibit, which statement is true?
Answer: A
Explanation:
In Versa SD-WAN, a Spoke-to-Hub-Only topology is specifically designed for deployments where spoke branches communicate only with hub resources and not with other spokes. Versa's SD-WAN design documentation states that in a spoke-to-hub-only topology, the default behavior is that only hub routes are advertised, and spoke routes are not re-advertised by the hub branch. It also explains that this topology is used when spokes do not have to communicate with each other.
Even though the hub in the exhibit advertises a default route, that does not change the topology behavior into spoke-to-spoke communication. The default route can attract unknown traffic from the spokes toward the hub, but the Spoke-to-Hub-Only policy prevents the spoke prefixes from being redistributed or imported in a way that allows spoke-to-spoke reachability. Versa documentation further shows that spoke routes are filtered using BGP communities and import policies, and that the spoke route table contains only destinations behind the hubs, not other spoke routes.
NEW QUESTION # 65
......
VNX301 Reliable Test Cram: https://www.real4exams.com/VNX301_braindumps.html