P.S. Free 2026 Nutanix NCP-MCI-7.5 dumps are available on Google Drive shared by RealExamFree: https://drive.google.com/open?id=1CtvpIQXpeyAh70ftZqVJ9XvH3kkKfNbv
Choosing our NCP-MCI-7.5 exam quiz will be a wise decision that you make, because this decision may have a great impact in your future development. Having the NCP-MCI-7.5 certificate may be something you have always dreamed of, because it can prove that you have certain strength. Our NCP-MCI-7.5 Exam Questions can provide you with services with pretty quality and help you obtain a certificate. The quality of our NCP-MCI-7.5 learning materials can withstand the test of practice.
| Section | Weight | Objectives |
|---|---|---|
| Infrastructure Lifecycle Management | 20-25% | - Lifecycle Manager (LCM) operations - Upgrading AOS and firmware - AHV hypervisor management - Node addition and removal |
| Security and Authentication | 15-20% | - SSL certificate management - Audit logging - Role-Based Access Control (RBAC) - Authentication integration (LDAP/AD) |
| Troubleshooting and Monitoring | 10-15% | - Common issue resolution - Performance monitoring - Prism alerts and notifications - Log collection and analysis |
| Multi-Cluster Operations | 20-25% | - Centralized management across multiple clusters - Cluster health monitoring - Cluster discovery and registration |
| Networking Concepts | 15-20% | - Network virtualization with AHV - Flow networking (Nutanix Flow) - IP address management - Network security policies |
| Storage Configuration | 10-15% | - Volume groups - Storage pools and containers - Storage tiering - Data reduction and compression |
| Prism Central | 20-25% | - Managing clusters via Prism Central - Prism Central overview and deployment - Prism Central navigation and dashboard |
Once you have decided to purchase our NCP-MCI-7.5 study materials, you can add it to your cart. Then just click to buy and pay for the certain money. When the interface displays that you have successfully paid for our NCP-MCI-7.5 study materials, our specific online sales workers will soon deal with your orders. You will receive the NCP-MCI-7.5 study materials no later than ten minutes. You need to ensure that you have written down the correct email address. Please check it carefully. If you need the invoice, please contact our online workers. They will send you an electronic invoice, which is convenient. You can download the electronic invoice of the NCP-MCI-7.5 Study Materials and reserve it.
NEW QUESTION # 44
An administrator needs to configure the virtual switch on a Nutanix AHV cluster to maximize both per-VM and per-host network throughput with LACP support. Which bond type should the administrator configure?
Answer: B
Explanation:
Nutanix networking documentation is explicit that LACP on AHV requires the Active-Active bond type, also described as balance-tcp. Nutanix further explains that this mode increases host and VM bandwidth utilization beyond a single uplink by balancing VM NIC TCP and UDP sessions across multiple physical adapters. That directly addresses both parts of the requirement in the question: maximizing per-host throughput and per-VM throughput while also providing LACP support. For that reason, B is the correct answer.
The other options do not satisfy the stated requirement. Active-Backup gives redundancy but does not aggregate active bandwidth. Active-Active with MAC pinning (balance-slb) can use multiple adapters without switch configuration, but Nutanix documents that it must not be used with LACP. "No Uplink Bond" obviously cannot maximize throughput or provide aggregation. This question is testing a core AHV networking distinction: if the user explicitly wants LACP, then the answer is always the Active-Active / balance-tcp model. That is why B is the authentic Nutanix answer.
NEW QUESTION # 45
An administrator is using Nutanix Move to migrate 10 VMs and has manually changed the preparation mode for two of the VMs.
What preparation mode will be used within the migration plan?
Answer: B
Explanation:
Nutanix Move documentation states that when the administrator changes the preparation mode for only a subset of VMs under Change Settings, and there is now a mix of preparation modes across the migration plan, the overall preparation mode automatically switches to Mixed. That is exactly the condition described in the question: 10 VMs in the migration plan, two manually changed, which creates more than one preparation mode across the plan. Therefore the correct answer is D. Mixed. ( Nutanix Portal ) This is an important Nutanix Move behavior because it affects how the migration plan is displayed and managed. The administrator does not get a brand-new custom label such as "Hybrid"; Nutanix specifically uses the term Mixed to indicate that some VMs are prepared one way and others another way. It also means the plan must be reviewed carefully so each VM's preparation setting aligns with guest OS requirements and migration prerequisites. Since the official Move documentation names this exact automatic state change, the authentic answer is D rather than Manual or Automatic. ( Nutanix Portal )
NEW QUESTION # 46
An administrator has been tasked to remove a node from a Nutanix cluster running SQL VMs to help with a hardware refresh. After the node removal started, the administrator received the following error:
Node node_uuid cannot be removed: Cluster needs at least 5 usable nodes.
What action does the administrator need complete to remove the node?
Answer: A
Explanation:
The error message is tied to resilience requirements. Nutanix documentation states that Replication Factor 3 requires at least five nodes so data remains online even if two nodes fail concurrently. If removing a node would drop the cluster below the minimum usable-node requirement, Nutanix blocks the operation. The safest and supported way to proceed during a hardware refresh is to add the replacement node first, restore compliant cluster capacity, and then remove the original node. ( Nutanix Portal ) The wrong answers all involve bypassing or weakening resilience inappropriately. Changing cluster or container RF to RF2 just to remove a node would reduce fault tolerance and is not the right answer for a SQL environment where resilience matters. Force-removal is also not the supported operational answer in a healthy refresh workflow. This question tests whether the administrator understands that node lifecycle actions are constrained by Nutanix fault-tolerance rules. When the cluster says it needs at least five usable nodes, the correct action is not to override the rule but to satisfy it by adding capacity first. Therefore A is the correct answer. ( Nutanix Portal )
NEW QUESTION # 47
An administrator needs to configure OpenLDAP in Prism Central.
Which type of account should the administrator use?
Answer: A
Explanation:
Nutanix security documentation for configuring OpenLDAP authentication in Prism Central clearly states that Prism Central uses a service account to query the OpenLDAP directory and that this service account must have the required read permissions on the directory service. That means the correct account type is not a generic admin, root, or Nutanix local account, but a dedicated service account created for the integration.
Therefore D is the authentic answer.
This is an important design principle in Nutanix authentication integration. A service account is preferred because it supports controlled, non-interactive access with appropriate least-privilege permissions and stable directory lookup behavior. Using a root or broad admin account would be poor security practice and is not how Nutanix documents the setup. The service account's role is not to log into Prism as a user but to let Prism Central query the directory safely and consistently. Because the official documentation names that account type directly, D. Service Account is the correct exam answer.
NEW QUESTION # 48
An administrator has a large group of VMs for the marketing team that all have the same RPO requirements of a snapshot every hour. A Protection Policy already exists with an hourly snapshot schedule. What is the easiest way to add this group of VMs to the Protection Policy?
Answer: B
Explanation:
Nutanix documentation for Protection Policies supports protecting entities by category, which is the most scalable and administratively efficient method when many current and future VMs share the same RPO requirement. By assigning the marketing VMs to a category and then associating that category with the policy, the administrator avoids one-by-one maintenance and also ensures new VMs can inherit protection simply by category assignment. ( Nutanix Portal ) This is exactly the kind of pattern Nutanix encourages across Prism Central: use categories for dynamic grouping and policy application. Adding each VM individually works, but it is not the easiest or most maintainable approach for a large VM set. Templates are not the unit used here for attaching data protection to running workloads. A category-based protection model gives consistency, scale, and easier future operations, particularly when teams like Marketing may continuously create or receive new VMs. Since the question asks for the easiest way, the category-based workflow in option A is the cleanest answer and aligns directly with official Nutanix policy design. ( Nutanix Portal )
NEW QUESTION # 49
......
Web-based Nutanix Certified Professional - Multicloud Infrastructure (NCP-MCI) 7.5 (NCP-MCI-7.5) practice exam is a convenient format to evaluate and improve preparation for the exam. It is a NCP-MCI-7.5 browser-based application, which means you can access it from any operating system with an internet connection and a web browser. Unlike the desktop-based exam simulation software, the Nutanix Certified Professional - Multicloud Infrastructure (NCP-MCI) 7.5 (NCP-MCI-7.5) browser-based practice test requires no plugins and software installation.
Free NCP-MCI-7.5 Test Questions: https://www.realexamfree.com/NCP-MCI-7.5-real-exam-dumps.html
BTW, DOWNLOAD part of RealExamFree NCP-MCI-7.5 dumps from Cloud Storage: https://drive.google.com/open?id=1CtvpIQXpeyAh70ftZqVJ9XvH3kkKfNbv