300-415問題集 & 300-415出題内容

ちなみに、Jpexam 300-415の一部をクラウドストレージからダウンロードできます：https://drive.google.com/open?id=17AJwbzMTTAFm-Otm3AAaXcgwkRUYVvO1

現在の社会的背景と開発の見通しに基づいて、300-415認定は徐々に職場で最も際立つための前提条件として受け入れられています。 300-415試験資料は、夢をかなえるための試験ツールとしてご利用いただけます。 10年以上の努力により、300-415実践教材は業界で最も信頼性の高い製品になりました。 300-415試験問題には多くの利点があり、時間をかけて知ることができます。

Cisco 300-415 Exam Overview:

Certification Vendor:Cisco
Exam Name:Implementing Cisco SD-WAN Solutions
Exam Number:300-415 ENSDWI
Exam Format:Simulation / scenario-based questions, Multiple choice (single answer), Multiple choice (multiple answers), Drag and drop
Available Languages:Chinese, English, Portuguese, Spanish, Japanese
Passing Score:Variable (scaled score, typically ~750/1000)
Exam Price:USD 300
Certificate Validity Period:3 years (CCNP certification validity period)
Real Exam Qty:Approximately 55–65
Related Certifications:CCNP Enterprise
Cisco SD-WAN Specialist
Exam Duration:120 minutes
Sample Questions:Cisco 300-415 Sample Questions
Exam Way:Online proctored exam or authorized Pearson VUE testing center
Pre Condition:Recommended: CCNA-level knowledge. Strongly recommended: CCNP Enterprise Core (350-401 ENCOR) or equivalent networking experience.

>> 300-415問題集 <<

Cisco 300-415出題内容 & 300-415専門知識訓練

Ciscoの300-415認定試験を受験する気があるのですか。この試験を受けた身の回りの人がきっと多くいるでしょう。これは非常に大切な試験で、試験に合格して300-415認証資格を取ると、あなたは多くのメリットを得られますから。では、他の人を頼んで試験に合格する対策を教えてもらったのですか。試験に準備する方法が色々ありますが、最も高効率なのは、きっと良いツールを利用することですね。ところで、あなたにとってどんなツールが良いと言えるのですか。もちろんJpexamの300-415問題集です。

Cisco 300-415試験の準備には、Cisco SD-WANソリューションのハンズオン経験とSD-WANコンセプトおよび技術のしっかりした理解が必要です。Ciscoは、インストラクター主導のトレーニング、オンラインコース、自己学習教材を含む、さまざまなトレーニングおよび認定プログラムを提供しています。Cisco Learning Networkは、勉強グループ、練習問題、その他のリソースを提供し、試験の準備を支援する優れたリソースです。

Cisco Implementing Cisco SD-WAN Solutions 認定 300-415 試験問題 (Q168-Q173):

質問 # 168
What are the default username and password for vSmart Controller when it is installed on a VMware ESXi hypervisor?

正解：B

解説：
The default username and password for a vSmart Controller when it is installed on a VMware ESXi hypervisor typically follow the same default credentials used in the Cisco SD-WAN environment. These default credentials are provided during the initial setup or installation of the vSmart Controller, and they are typically as follows:
Default Username: admin
Default Password: admin


質問 # 169
What is the function of colocation in Cloud OnRamp SaaS?

正解：A


質問 # 170
SIMULATION
Configure individual VRFs for each customer according to the topology to achieve these goals:


R1




R2




SW1



SW2



SW3






正解：C

解説：
Solution:
Use cu-red under interfaces facing SW1 & SW3:
On R1:
interface Ethernet0/0
ip vrf forwarding cu-red
ip address 192.168.1.254 255.255.255.0
Check reachability to SW1:
R1#ping vrf cu-red 192.168.1.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.2.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
On R2:
interface Ethernet0/0
ip vrf forwarding cu-red
ip address 192.168.2.254 255.255.255.0
Check reachability to SW3:
R2#ping vrf cu-red 192.168.2.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.1.1, timeout is 2 seconds:
!!!!!
Use vrf cu-green for SW2 & SW4:
On R1:
interface Ethernet0/1
ip vrf forwarding cu-green
ip address 192.168.20.254 255.255.255.0
Test reachability to SW2:
R1#ping vrf cu-green 192.168.20.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.22.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
On R2:
interface Ethernet0/1
ip vrf forwarding cu-green
ip address 192.168.22.254 255.255.255.0
Test reachability to SW4:
R2#ping vrf cu-green 192.168.22.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.20.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
On R1:
interface Ethernet0/2.100
mpls ip
!
interface Ethernet0/2.200
mpls ip
!
Configure BGP:
router bgp 65000
neighbor 10.10.10.2 remote-as 65000
neighbor 10.10.20.2 remote-as 65000
!
address-family vpnv4
neighbor 10.10.10.2 activate
neighbor 10.10.20.2 activate
exit-address-family
!
address-family ipv4 vrf cu-green
redistribute connected
exit-address-family
!
address-family ipv4 vrf cu-red
redistribute connected
exit-address-family
!
R1(config)#ip vrf cu-red
R1(config-vrf)#route-target both 65000:100
!
R1(config)#ip vrf cu-green
R1(config-vrf)#route-target both 65000:200
On R2:
interface Ethernet0/2.100
mpls ip
!
interface Ethernet0/2.200
mpls ip
!
router bgp 65000
neighbor 10.10.10.1 remote-as 65000
neighbor 10.10.20.1 remote-as 65000
!
address-family vpnv4
neighbor 10.10.10.1 activate
neighbor 10.10.20.1 activate
exit-address-family
!
address-family ipv4 vrf cu-green
redistribute connected
exit-address-family
!
address-family ipv4 vrf cu-red
redistribute connected
exit-address-family
R2(config)#ip vrf cu-red
R2(config-vrf)#route-target both 65000:100
!
R2(config)#ip vrf cu-green
R2(config-vrf)#route-target both 65000:200
Verification:
From SW1 to SW3:
SW1#ping 192.168.1.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.1.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
But can't Reach SW2 or SW4 in VRF cu-green:
SW1#ping 192.168.22.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.22.1, timeout is 2 seconds:


質問 # 171
An administrator needs to configure SD-WAN to divert traffic from the company's private network to an ISP network. What action should be taken to accomplish this goal?

正解：A

解説：


質問 # 172
Refer to the exhibit.

An engineer is troubleshooting a control connection Issue. What does "connect" mean in this how control connections output?

正解：B


質問 # 173
......

300-415出題内容: https://www.jpexam.com/300-415_exam.html

さらに、Jpexam 300-415ダンプの一部が現在無料で提供されています：https://drive.google.com/open?id=17AJwbzMTTAFm-Otm3AAaXcgwkRUYVvO1