Today is the best time to become competive TestPassKing and updated in the market. You can do this easily. Just enroll in the SRAN-Radio-Network-Performance-Optimization exam and start SRAN-Radio-Network-Performance-Optimization certification exam preparation Nokia SRAN-Radio-Network-Performance-Optimization Exam Dumps. Solutions SRAN-Radio-Network-Performance-Optimization exam dumps after paying an affordable MN: NCSS NPS - SRAN Radio Network Performance Optimization Certification Exam | GS40-NPS-SRPER-E-S03-2510 (SRAN-Radio-Network-Performance-Optimization) exam questions charge and start this journey without wasting further time.
| Section | Objectives |
|---|---|
| Troubleshooting and Performance Analysis | - Network issue identification and resolution
|
| LTE/NR Performance Optimization | - Optimization techniques
|
| SRAN Architecture Overview | - SRAN network structure and components
|
| RF Optimization Principles | - Coverage and capacity optimization
|
| Radio Network Performance Fundamentals | - Key performance indicators (KPIs)
|
>> SRAN-Radio-Network-Performance-Optimization Reliable Test Syllabus <<
MN: NCSS NPS - SRAN Radio Network Performance Optimization Certification Exam | GS40-NPS-SRPER-E-S03-2510 (SRAN-Radio-Network-Performance-Optimization) questions is a comprehensive solution for SRAN-Radio-Network-Performance-Optimization exam preparation, offering a wide range of features designed to help you succeed. The Nokia exam is an essential milestone to achieve the SRAN-Radio-Network-Performance-Optimization Certification. With SRAN-Radio-Network-Performance-Optimization exam dumps, you'll have access to Nokia SRAN-Radio-Network-Performance-Optimization actual questions that are enough to crack the SRAN-Radio-Network-Performance-Optimization exam in a short time.
NEW QUESTION # 20
In NR SA Option 2, the UE is camped on an SA serving cell. An IRAT handover is triggered for a multi-QCI call, QCI 1 and QCI 6, due to weak coverage of the serving cell. What will happen to both QCIs during the IRAT handover toward LTE?
Answer: D
Explanation:
The correct answer is D.
In 5G SA Option 2, NR works independently with the 5G Core, but interworking with LTE/EPC can be supported for mobility continuity. When IRAT handover toward LTE is triggered due to weak NR coverage, the goal is to preserve the active services during mobility.
For a multi-QCI service:
QCI 1 normally represents the voice bearer, such as VoLTE/IMS voice continuity after movement to LTE.
QCI 6 normally represents a non-GBR data bearer.
During a supported IRAT handover from NR SA to LTE, both the voice bearer and data bearer can be transferred to LTE, assuming proper interworking, bearer mapping, and LTE coverage availability.
Option C is incorrect because IRAT mobility from NR SA to LTE is supported in properly configured networks. Option A is incorrect because the voice bearer is the most critical bearer to preserve. Option B is also not the best answer because the data bearer does not necessarily need to be released during IRAT handover.
Therefore, the expected result is:
Both QCI 1 voice and QCI 6 data continue on LTE.
NEW QUESTION # 21
In a 5G NSA Option 3x deployment, why should we not define 5G neighbors in LTE sectors where there is no 5G coverage ?
Answer: D
Explanation:
The correct answer is A .
In 5G NSA Option 3x , LTE acts as the Master Cell Group , and NR acts as the Secondary Cell Group , usually added through EN-DC . If 5G NR neighbors are configured in an LTE sector where there is actually no 5G coverage , the LTE eNB may still configure the UE to perform NR measurements.
To perform NR inter-RAT or inter-frequency measurements, the UE may require measurement gaps .
During these gaps, the UE stops normal LTE reception/transmission activities to measure NR frequencies. If there is no real 5G coverage, those gaps become wasted measurement time and can reduce LTE user throughput.
Option B is not the best answer because if there is no 5G coverage, the main issue is not successful SCG addition or handover degradation, but unnecessary measurement activity. Option C is also not correct because redirection from 5G to 4G normally occurs when the UE is already on or connected to 5G coverage, which is not the case here.
Therefore, the main reason is:
LTE throughput degradation due to unnecessary measurement gap configuration.
NEW QUESTION # 22
Evaluate the impact of extended FR2 cell range on power consumption.
Answer: D
Explanation:
The correct answer is C .
In FR2/mmWave , uplink coverage is often the limiting factor because UE transmit power is much lower than gNodeB transmit power, and mmWave propagation suffers from high path loss and blockage. Ericsson's mmWave coverage discussion also notes that high-band coverage is limited by uplink signal quality and high- band propagation characteristics.
When the FR2 cell range is extended, UEs farther from the serving cell must transmit uplink signals over a more difficult radio path. This usually requires higher UE transmit power, more robust MCS, more repetitions or retransmissions, and potentially longer uplink activity. As a result, UE battery consumption can increase.
Therefore, extended FR2 range generally:
Increases power consumption because UEs need more energy to transmit uplink signals.
NEW QUESTION # 23
What is the mandatory prerequisite to implement DSS , or Dynamic Spectrum Sharing ?
Answer: D
Explanation:
The correct answer is D .
DSS allows LTE and 5G NR to share the same spectrum dynamically , instead of requiring a separate dedicated NR carrier. Therefore, dedicated NR spectrum is not mandatory. DSS is also not limited to TDD only; it is commonly used in FDD spectrum refarming scenarios as well. Public RAN references describe DSS as a mechanism where LTE and NR coexist in the same frequency band and share spectrum dynamically.
From an SRAN architecture point of view, the mandatory deployment condition is that the radio platform must support LTE and NR coexistence on the same radio resources. That requires RF module sharing or a DSS-capable shared radio configuration.
So the correct prerequisite is:
RF module sharing.
NEW QUESTION # 24
A slice supporting sensors and smart meters would be categorized as:
Answer: B
Explanation:
The correct answer is A .
Sensors and smart meters are typical massive IoT use cases. They usually involve a very large number of devices sending small amounts of data, often with low mobility and low power requirements.
This type of traffic fits mMTC , or massive Machine Type Communications .
Why the other options are not correct:
URLLC is used for very low-latency and highly reliable services, such as industrial automation, remote control, or mission-critical applications.
eMBB is used for high-throughput broadband services, such as video, fixed wireless access, or enhanced mobile internet.
DNN is not a slice category. It means Data Network Name and identifies the data network the UE connects to, similar to APN in LTE.
Therefore, a slice supporting sensors and smart meters is categorized as:
mMTC.
NEW QUESTION # 25
......
The SRAN-Radio-Network-Performance-Optimization practice test software provides you the assistance to self-assess your progress. It helps you analyze the gradual improvement and notice the shortcomings while preparing Nokia SRAN-Radio-Network-Performance-Optimization through this format. The ability to customize your Nokia SRAN-Radio-Network-Performance-Optimization Practice Test time and the types of Nokia SRAN-Radio-Network-Performance-Optimization questions will turn your preparation into an easy affair.
Sample SRAN-Radio-Network-Performance-Optimization Questions Pdf: https://www.testpassking.com/SRAN-Radio-Network-Performance-Optimization-exam-testking-pass.html