퍼펙트한300-820최신인증시험덤프데모문제보기

참고: Pass4Test에서 Google Drive로 공유하는 무료, 최신 300-820 시험 문제집이 있습니다: https://drive.google.com/open?id=1xZcicqn6qgfluckeCa282XMdyHMDhOyQ

Cisco인증300-820시험은 국제적으로 승인해주는 IT인증시험의 한과목입니다. 근 몇년간 IT인사들에게 최고의 인기를 누리고 있는 과목으로서 그 난이도 또한 높습니다. 자격증을 취득하여 직장에서 혹은 IT업계에서 자시만의 위치를 찾으련다면 자격증 취득이 필수입니다. Cisco인증300-820시험을 패스하고 싶은 분들은Pass4Test제품으로 가보세요.

Cisco 300-820 Exam Syllabus Topics:

Section	Objectives
Collaboration Cloud Architecture	- Cisco Collaboration cloud and hybrid architecture concepts - Webex platform integration overview
Cisco Expressway and Edge Services	- Expressway-C and Expressway-E deployment - Mobile and Remote Access (MRA)
Call Control and SIP Integration	- SIP trunking and call routing design - Cisco Unified Communications Manager (CUCM) integration
Hybrid Collaboration Services	- Calendar, directory, and media services integration - Webex hybrid calling deployment
Security and Troubleshooting	- Troubleshooting hybrid collaboration deployments - TLS/SRTP and secure signaling

>> 300-820최신 인증시험 <<

300-820인증 시험덤프 - 300-820시험대비 최신 덤프

제일 빠른 시일내에 제일 간단한 방법으로Cisco인증 300-820시험을 패스하는 방법이 없냐구요? Pass4Test의Cisco인증 300-820덤프를 공부하시면 가능합니다. Pass4Test의Cisco인증 300-820덤프는 많은 분들이 검증한 가장 유력한Cisco인증 300-820시험공부자료입니다. 덤프의 문제만 기억하시면 패스는 문제없기에 제일 빠른 시일내에 시험을 패스하여 자격증 취득이 가능합니다.

최신 CCNP Collaboration 300-820 무료샘플문제 (Q183-Q188):

질문 # 183
An engineer wants to configure a zone on the Expressway-E to receive communications from the Expressway-C in order to allow inbound and outbound calls.
How is the peer address configured on the Expressway-C when Expressway-E has only one NIC enabled and is using static NAT mode?

A. Cisco UCM FQDN
B. Expressway-E DHCP
C. Expressway-E FQDN
D. Cisco UCM DHCP

정답：C

설명：
https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/config_guide/X8-
11/Cisco-Expressway-Basic-Configuration-Deployment-Guide-X8-11-4.pdf

질문 # 184
Refer to the exhibit.

What is the result of a transformation applied to alias 88514?

A. 88515@ccnpcollab.com
B. 88514@ccnpcollab.com
C. 98851@ccnpcollab.com
D. 88513@ccnpcollab com

정답：B

질문 # 185
An engineer must configure the zone to connect to an Expressway-E using Single NIC with NAT.
The internal IP address is 192.168.10.63, and the NAT address is 203.0.113.5. What must the engineer configure on the Expressway-C to meet this requirement?

A. traversal zone with the peer address of 203.0.113.5
B. neighbor zone with the peer address 192.168.10.63
C. neighbor zone with the peer address of 203.0.113.5
D. traversal zone with the peer address 192.168.10.63

정답：A

설명：
In this example, firewall A must allow NAT reflection of traffic coming from the Expressway-C that is destined for the external address, that is 64.100.0.10, of the Expressway-E. The traversal zone on the Expressway-C must have 64.100.0.10 as the peer address.
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/expressway/config_guide/X14-0/basic_config/exwy_b_cisco-expressway-e-and-expressway-c-basic-configuration-deployment- guide-x14-0/exwy_m_advanced-networking-deployments.html

질문 # 186
Refer to the exhibit. After phone numbers are migrated into Webex Calling via Control Hub, users report that incoming calls fail to ring on their assigned phones, and callers hear a rejection message.
The administrator determines:
- Devices show as registered in the Control Hub device status view.
- Media statistics for other calls are normal
- In user and device assignments, the numbers are mapped to users.
What is the cause of this issue?

A. The Call intercept feature is enabled on user accounts, which causes all incoming calls to be blocked.
B. The user location has insufficient internet bandwidth.
C. The caller's network is experiencing high latency.
D. The phone numbers are not assigned to any device.

정답：A

설명：
Call intercept is enabled for the location shown in Control Hub. When call intercept is active, incoming calls can be blocked or redirected according to the intercept configuration, which explains why registered phones with assigned numbers do not ring and callers hear a rejection message.

질문 # 187
After an engineer implements load balancing in the Cisco CMS cluster, they observe that shortly after the second Call Bridge is added to the cluster, call into a space randomly disconnect when the calls are from endpoints registered with Cisco UCM. Which action resolves the issue?

A. Enable "Accept Out-of-dialog REFER" on the SIP Trunk security profile".
B. Enable "Accept Presence Subscription" on the SIP Trunk security profile on Cisco UCM.
C. Enable "Accept Replaces Header" on the SIP Trunk security profile on Cisco UCM.
D. Enable "Accept Unsolicited Notification" on the SIP Trunk security profile.

정답：C

설명：
In a Cisco Meeting Server (CMS) cluster, when multiple Call Bridges are involved, call continuity across bridges (especially during load balancing) relies on the use of the Replaces header in SIP signaling. To support this, you must enable "Accept Replaces Header" in the SIP Trunk Security Profile on Cisco UCM. Without this setting, inter-bridge call transfers can fail, causing calls to disconnect.

질문 # 188
......

Cisco 300-820시험패스는 어려운 일이 아닙니다. Pass4Test의 Cisco 300-820 덤프로 시험을 쉽게 패스한 분이 헤아릴수 없을 만큼 많습니다. Cisco 300-820덤프의 데모를 다운받아 보시면 구매결정이 훨씬 쉬워질것입니다. 하루 빨리 덤프를 받아서 시험패스하고 자격증 따보세요.

300-820인증 시험덤프: https://www.pass4test.net/300-820.html

2026 Pass4Test 최신 300-820 PDF 버전 시험 문제집과 300-820 시험 문제 및 답변 무료 공유: https://drive.google.com/open?id=1xZcicqn6qgfluckeCa282XMdyHMDhOyQ