BONUS!!! Download part of Exam4Docs SRAN-Radio-Network-Performance-Optimization dumps for free: https://drive.google.com/open?id=1ff_W8pPI4wKUmULysrC4KOrDQvPIiK2H
As you all know that practicing with the wrong preparation material will waste your valuable money and many precious study hours. So you need to choose the most proper and verified preparation material with caution. Preparation material for the MN: NCSS NPS - SRAN Radio Network Performance Optimization Certification Exam | GS40-NPS-SRPER-E-S03-2510 (SRAN-Radio-Network-Performance-Optimization) exam questions from Exam4Docs helps to break down the most difficult concepts into easy-to-understand examples. Also, you will find that all the included questions are based on the last and updated SRAN-Radio-Network-Performance-Optimization Exam Dumps version. We are sure that using SRAN-Radio-Network-Performance-Optimization Exam Questions preparation material will support you in passing the SRAN-Radio-Network-Performance-Optimization exam with confidence.
| Section | Weight | Objectives |
|---|---|---|
| SRAN Optimization Tools and Reports | 10-15% | - Automated optimization features - Configuration management for optimization - Nokia NetAct and performance tools - Report generation and interpretation |
| Performance Troubleshooting | 20-25% | - Root cause analysis methodologies - Troubleshooting tools utilization - Optimization case studies - Network failure identification and resolution - Common performance issues diagnosis |
| SRAN Architecture and Fundamentals | 15-20% | - SRAN network architecture overview - SRAN solution components and functions - Single RAN integration principles - Radio access concepts and principles |
| Radio Network Performance Monitoring | 20-25% | - Threshold configuration and alerting - Performance monitoring tools and dashboards - Real-time network monitoring techniques - KPI definition and measurement - Performance data collection and analysis |
| Radio Network Optimization Techniques | 25-30% | - Capacity optimization strategies - Interference analysis and mitigation - Load balancing techniques - Parameter tuning best practices - Handover optimization - Coverage optimization methods |
>> SRAN-Radio-Network-Performance-Optimization Study Center <<
With our SRAN-Radio-Network-Performance-Optimization test prep, you don't have to worry about the complexity and tediousness of the operation. As long as you enter the learning interface of our soft test engine of SRAN-Radio-Network-Performance-Optimization quiz guide and start practicing on our Windows software, you will find that there are many small buttons that are designed to better assist you in your learning. When you want to correct the answer after you finish learning, the correct answer for our SRAN-Radio-Network-Performance-Optimization test prep is below each question, and you can correct it based on the answer. In addition, we design small buttons, which can also show or hide the SRAN-Radio-Network-Performance-Optimization Exam Torrent, and you can flexibly and freely choose these two modes according to your habit. In short, you will find the convenience and practicality of our SRAN-Radio-Network-Performance-Optimization quiz guide in the process of learning. We will also continue to innovate and improve functions to provide you with better services.
NEW QUESTION # 21
Which port must be opened in NetAct for the connection from TraceSynthesis to NetAct?
Answer: C
Explanation:
The correct answer is B .
The connection from TraceSynthesis to NetAct is typically based on secure web/API communication, which uses HTTPS . The standard HTTPS port is 443 . Therefore, port 443 must be opened in NetAct/firewall rules to allow TraceSynthesis to communicate with NetAct.
The other options are not the best answer:
8443 is often used as an alternative HTTPS/application-server port, but it is not the standard answer here.
22 is used for SSH, mainly for secure shell access or file transfer.
8080 is commonly used for unsecured HTTP or proxy/application access, not the secure NetAct connection expected here.
So the required port is:
443.
NEW QUESTION # 22
In the context of radio capacity management , what is the significance of Scheduling Request periodicity ?
Answer: B
Explanation:
The correct answer is C .
Scheduling Request , or SR , is used by the UE to request uplink resources when it has uplink data to send.
The SR periodicity defines how often the UE gets an opportunity to send this scheduling request.
A shorter SR periodicity means the UE can request uplink resources more quickly, which improves uplink latency. However, it consumes more PUCCH/control-channel resources, reducing the number of UEs that can be efficiently supported.
A longer SR periodicity saves control-channel resources and can support more connected users, but it increases uplink access delay.
Therefore, SR periodicity is important because it creates a trade-off between:
Lower latency and higher connected-user capacity.
NEW QUESTION # 23
The CB009425 feature provides several enhancements to improve the transmission link budget for VoNR, offering a better customer experience. Which statements are correct regarding this feature?
Answer: C
Explanation:
The correct answer is D.
The feature is focused on improving VoNR link robustness and user experience, especially near the cell edge or in difficult RF conditions. VoNR is sensitive to packet loss, delay, and uplink coverage limitations.
Therefore, link-budget improvement features commonly target BLER behavior, transport block sizing, and MCS robustness.
Statement A is correct because minimizing Packet Loss Rate, or PLR, directly improves VoNR speech quality and reduces mute, clipping, or robotic voice effects.
Statement B is correct because VoNR bearers can use specific initial BLER targets. A more suitable BLER target helps the scheduler choose a more robust MCS for voice traffic.
Statement C is correct because a configurable uplink minimum TBS, or Transport Block Size, helps ensure that small VoNR packets are transmitted efficiently and reliably.
Statement D is correct because MCS downgrade control can improve robustness by selecting a more conservative modulation and coding scheme for VoNR DRBs when radio conditions require it.
Therefore, all listed enhancements are part of the VoNR link-budget improvement concept:
A, B, C, and D.
NEW QUESTION # 24
When selecting an LTE anchor layer for EN-DC , why is it important to check 3GPP band combinations ?
Answer: C
Explanation:
The correct answer is B .
In 5G NSA EN-DC , the UE connects to LTE as the Master Cell Group , or anchor, and NR as the Secondary Cell Group . Not every LTE band can be paired with every NR band. The supported LTE-NR combinations are defined by 3GPP band-combination rules and must also be supported by the UE chipset and device capability.
For example, an operator may have LTE Band 3, Band 7, or Band 20 and NR n78, but only certain LTE-NR combinations may be valid for EN-DC. If the selected LTE anchor band is not supported in combination with the NR band, the UE will not be able to establish EN-DC even if LTE and NR coverage both exist.
Option C is not correct because dual-uplink support depends on UE capability and specific band-combination support; it cannot be guaranteed for all UE models. Option A and D are unrelated to the main purpose of checking 3GPP band combinations.
So the correct reason is:
To ensure that LTE and NR bands are compatible and allowed as EN-DC pairs.
NEW QUESTION # 25
Evaluate the impact of extended FR2 cell range on power consumption.
Answer: C
Explanation:
The correct answer is C .
In FR2/mmWave , uplink coverage is often the limiting factor because UE transmit power is much lower than gNodeB transmit power, and mmWave propagation suffers from high path loss and blockage. Ericsson's mmWave coverage discussion also notes that high-band coverage is limited by uplink signal quality and high- band propagation characteristics.
When the FR2 cell range is extended, UEs farther from the serving cell must transmit uplink signals over a more difficult radio path. This usually requires higher UE transmit power, more robust MCS, more repetitions or retransmissions, and potentially longer uplink activity. As a result, UE battery consumption can increase.
Therefore, extended FR2 range generally:
Increases power consumption because UEs need more energy to transmit uplink signals.
NEW QUESTION # 26
......
After using our software, you will know that it is not too difficult to pass SRAN-Radio-Network-Performance-Optimization exam. You will find some exam techniques about how to pass SRAN-Radio-Network-Performance-Optimization exam from the exam materials and question-answer analysis provided by our Exam4Docs. Besides, to make you be rest assured of our dumps, we provide SRAN-Radio-Network-Performance-Optimization Exam Demo for you to free download.
SRAN-Radio-Network-Performance-Optimization Reliable Exam Preparation: https://www.exam4docs.com/SRAN-Radio-Network-Performance-Optimization-study-questions.html
2026 Latest Exam4Docs SRAN-Radio-Network-Performance-Optimization PDF Dumps and SRAN-Radio-Network-Performance-Optimization Exam Engine Free Share: https://drive.google.com/open?id=1ff_W8pPI4wKUmULysrC4KOrDQvPIiK2H