Exam JN0-364 Testking & Reliable JN0-364 Exam Testking

We often receive news feeds and what well-known entrepreneurs have done to young people. The achievements of these entrepreneurs are the goals we strive for and we must value their opinions. And you may don't know that they were also benefited from our JN0-364 study braindumps. We have engaged in this career for over ten years and helped numerous enterpreneurs achieved their JN0-364 certifications toward their success. Just buy our JN0-364 learning materials and you will become a big man as them.

Juniper JN0-364 Exam Syllabus Topics:

SectionObjectives
Multiprotocol Label Switching (MPLS)- Demonstrate knowledge of how to configure, monitor, or troubleshoot MPLS
  • 1. Shortest path segment-routing LSPs
  • 2. RSVP-signaled Label-Switched Paths (LSPs)
  • 3. LDP-signaled Label-Switched Paths (LSPs)
  • 4. MPLS forwarding
- Identify the concepts, operation, or functionality of MPLS CoS processing on Junos devices
  • 1. MPLS terminology
  • 2. MPLS packet header
  • 3. End-to-end packet flow and forwarding
  • 4. RSVP
  • 5. Labels and the label information base
  • 6. LDP
  • 7. Segment routing with MPLS
  • 8. MPLS and routing tables
Spanning Tree Protocols- Demonstrate knowledge of how to configure, monitor, or troubleshoot Spanning Tree Protocols
  • 1. VSTP
  • 2. RSTP
  • 3. STP
  • 4. MSTP
- Identify the concepts, operation, or functionality of STP
  • 1. VSTP
  • 2. RSTP
  • 3. STP
  • 4. MSTP
Open Shortest Path First (OSPF)- Identify the concepts, operation, or functionality of OSPF
  • 1. Adjacencies and neighbors
  • 2. OSPF packet types
  • 3. Router ID
  • 4. Link-state database
  • 5. OSPF area and router types
  • 6. Link-state advertisement (LSA) packet type
  • 7. Designated router and backup designated router
- Demonstrate knowledge of how to configure, monitor, or troubleshoot OSPF
  • 1. Routing policy application
  • 2. Troubleshooting tools
  • 3. Interfaces and neighbor
Protocol-Independent Routing- Demonstrate knowledge of how to configure, monitor, or troubleshoot various protocol-independent routing components
  • 1. Load balancing
  • 2. Static, aggregate, and generated routes
  • 3. Filter-based forwarding
- Identify the concepts, operation, or functionality of various protocol-independent routing components
  • 1. Routing instances, including routing information base (RIB) (also known as routing table) group
  • 2. Load balancing
  • 3. Static, aggregate, and generated routes
  • 4. Martian addresses
  • 5. Filter-based forwarding
IPv6- Demonstrate knowledge of how to configure, monitor, or troubleshoot IPv6
- Identify the concepts, operation, or functionality of IPv6
  • 1. Static routes
  • 2. Dynamic routing - OSPFv3, IS-IS, BGP
  • 3. IPv6 over IPv4 tunneling
Layer 2 Bridging or VLANs- Demonstrate knowledge of how to configure, monitor, or troubleshoot Layer 2 bridging or VLANs
  • 1. Interfaces and ports
  • 2. Provider bridging
  • 3. VLANs
  • 4. IRB
- Identify the concepts, operation, or functionality of Layer 2 bridging for the Junos OS
  • 1. Bridging elements and terminology
  • 2. Frame processing
  • 3. Provider bridging (Q-in-Q tunneling)
  • 4. Service provider switching platforms
  • 5. Virtual Switches
- Identify the concepts, benefits, or functionality of VLANs
  • 1. Tagging
  • 2. Integrated Routing and Bridging (IRB)
  • 3. Port modes
Intermediate System to Intermediate System (IS-IS)- Identify the concepts, operation, or functionality of IS-IS
  • 1. IS-IS protocol data units (PDUs)
  • 2. Adjacencies and neighbors
  • 3. Levels and areas
  • 4. Link-state database
  • 5. Type, length, values (TLVs)
  • 6. Metrics
  • 7. Designated intermediate system (DIS)
- Demonstrate knowledge of how to configure, monitor, or troubleshoot IS-IS
  • 1. Routing policy application
  • 2. Troubleshooting tools
  • 3. Interfaces and adjacencies
Border Gateway Protocol (BGP)- Demonstrate knowledge of how to configure, monitor, or troubleshoot BGP
  • 1. Routing policy application
  • 2. Troubleshooting tools
  • 3. Peers and peer groups
- Identify the concepts, operation, or functionality of BGP
  • 1. BGP message types
  • 2. Route selection process
  • 3. BGP route reflection and confederations
  • 4. Attributes
  • 5. IBGP and EBGP functionality and interaction
  • 6. BGP basic operation

>> Exam JN0-364 Testking <<

Valid Exam JN0-364 Testking | Latest Juniper Reliable JN0-364 Exam Testking: Service Provider Routing and Switching, Specialist (JNCIS-SP)

We have always been known as the superior after sale service provider, since we all tend to take lead of the whole process after you choose our JN0-364 exam questions. So you have no need to trouble about our JN0-364 study guide, if you have any questions, we will instantly response to you. Our JN0-364 Training Materials will continue to pursue our passion for better performance and comprehensive service of JN0-364 exam.

Juniper Service Provider Routing and Switching, Specialist (JNCIS-SP) Sample Questions (Q32-Q37):

NEW QUESTION # 32
An established RSVP-signaled LSP suffers a link failure. What is one action taken by the local RSVP-enabled router?

Answer: D


NEW QUESTION # 33
Exhibit:

You have configured an MPLS LSP to 192.168.100.3. However, the LSP is in the down state. Referring to the exhibit, which two actions would solve this problem? (Choose two.)

Answer: A,D

Explanation:
In a Juniper Networks environment, establishing a functionalMultiprotocol Label Switching (MPLS)Label- Switched Path (LSP) requires synchronized control plane operations. According to Juniper technical documentation, the most common reason for an LSP to remain in the "Down" state at the ingress router is a failure of theConstrained Shortest Path First (CSPF)algorithm during the path computation phase.
The provided exhibit for routerR1reveals a critical error in the show mpls lsp detail output: "CSPF: could not determine self". This specific error indicates that the CSPF process is unable to find its own local router ID within theTraffic Engineering Database (TED). For CSPF to build a valid TED, the underlying Interior Gateway Protocol (IGP), such as OSPF, must be configured to flood opaque link-state advertisements (Type
10 LSAs) that carry traffic engineering attributes. As seen in the OSPF configuration, traffic engineering is not enabled. Therefore, issuing theset protocols ospf traffic-engineeringcommand (Option D) will allow R1 to populate the TED with its own local information and that of its neighbors, enabling CSPF to calculate a valid path.
Alternatively, an administrator can choose to bypass the requirement for a TED entirely by disabling CSPF on the specific LSP. By issuing theset protocols mpls label-switched-path to-r3 no-cspfcommand (Option B), the router will stop attempting to perform a constrained path calculation. Instead, the signaling protocol (RSVP) will rely on the standardinet.0routing table to determine the hop-by-hop path to the egress destination (192.168.100.3), allowing the LSP to establish without traffic engineering constraints.
Regarding the other options, whilefamily mplsis required on all transit interfaces, the ingress loopback interface (lo0) generally does not require it for standard LSP signaling unless it's used as a transit hop.
Furthermore, adding a static route toinet.3(Option A) is used for next-hop resolution of BGP routes over LSPs but does not assist in the signaling or establishment of the LSP itself.


NEW QUESTION # 34
Referring to the exhibit, internal BGP between R1 and R2 is not establishing.
What is the problem In this scenario?

Answer: D

Explanation:
The exhibit shows that the BGP session state is "Active," which generally indicates that the router is trying to establish a BGP session but has not received a response. One common cause for this issue is that there is no route to the BGP neighbor's address. Since the routers are using internal BGP (iBGP) and they are in the same AS, the AS number does not need to be unique, and a next-hop self policy is not strictly required for iBGP. The router-id is usually automatically determined and does not need to be explicitly set.


NEW QUESTION # 35
What are three extension headers supported by IPv6? (Choose three.)

Answer: B,C,E

Explanation:
Hop-by-hop options is an IPv6 extension header that carries information requiring processing by every router along the packet's path.
Destination options is an IPv6 extension header used to carry optional information that is processed only by the destination node or specific intermediate nodes.
Fragment is an IPv6 extension header used when a packet must be fragmented by the sending host so the receiving host can reassemble the fragments.


NEW QUESTION # 36
What are two requirements for a unified in-service software upgrade? (Choose two.)

Answer: A,C


NEW QUESTION # 37
......

Hundreds of Juniper aspirants have cracked the Service Provider Routing and Switching, Specialist (JNCIS-SP) examination by just preparing with our real test questions. If you also want to become a Juniper certified without any anxiety, download Juniper updated test questions and start preparing today. These Real JN0-364 Dumps come in desktop practice exam software, web-based practice test, and JN0-364 PDF document. Below are specifications of these three formats.

Reliable JN0-364 Exam Testking: https://www.validdumps.top/JN0-364-exam-torrent.html