Because of the different habits and personal devices, requirements for the version of our NSE6_FNC_AD-7.6 exam questions vary from person to person. To address this issue, our NSE6_FNC_AD-7.6 actual exam offers three different versions for users to choose from. The PC version is the closest to the real test environment, which is an excellent choice for windows - equipped computers. And this version also helps establish the confidence of the candidates when they attend the NSE6_FNC_AD-7.6 Exam after practicing.
| Section | Objectives |
|---|---|
| Concepts and Initial Configuration | - Explain isolation networks and the configuration wizard - Model and organize infrastructure devices |
| Deployment and Provisioning | - Configure security automation - Configure and monitor high availability (HA) - Configure access control on FortiNAC-F - Configure FortiNAC-F security policies |
| Integration | - Configure mobile device management (MDM) integration - Integrate with third-party devices using Syslog and SNMP traps - Configure and use FortiNAC-F Manager |
| Network Visibility and Monitoring | - Manage guests and contractors - Troubleshoot network devices and device status - Use logging options - Configure device profiling |
>> NSE6_FNC_AD-7.6 Reliable Test Notes <<
With our study materials, you do not need to have a high IQ, you do not need to spend a lot of time to learn, you only need to follow the method NSE6_FNC_AD-7.6 real questions provide to you, and then you can easily pass the exam. Our study material is like a tutor helping you learn, but unlike a tutor who make you spend too much money and time on learning. As usual, you just need to spend little time can have a good commend of our study materials, then you can attend to your NSE6_FNC_AD-7.6 Exam and pass it at your first attempt.
NEW QUESTION # 43
Refer to the exhibit.
What will happen to the host of a guest user created from this template if the time of connection is 8:00 PM?
Answer: D
Explanation:
In FortiNAC-F, theGuest & Contractor Templateis a configuration object that defines the parameters for accounts created by sponsors or through self-registration. One of the critical security controls within this template is theLogin Availabilitysetting. This setting restricts the specific days and times during which a guest or contractor is permitted to authenticate and access the network.
As shown in the exhibit, the " StandardGuest " template hasLogin Availabilityset to " Specify Time " , with a schedule defined asMon-Fri, 6:00 AM to 7:00 PM. If a guest user attempts to connect or authenticate at8:00 PM, which is outside of the permitted window, FortiNAC-F ' s policy engine will automatically deny the authentication request. When an authentication attempt is denied due to schedule restrictions, the system does not move the host into the " Authenticated " or " Registered " state required for production access. Instead, the host ismarked as non-authenticatedin the adapter or host view.
This behavior ensures that even if a guest possesses valid credentials, their access is strictly bound by the organizational policy for visitor hours. The host will typically remain in its current isolation or registration VLAN, and the user will see a message on the captive portal indicating that their account is not currently authorized for login. It is important to distinguish this from " at-risk " (C), which relates to security scan failures, or " rogue " (B), which typically refers to unknown devices that have not yet been associated with a valid account or profiling rule.
" Login Availabilitydefines the timeframe during which the guest or contractor account is valid for network access. This schedule is enforced at the time of authentication. If a user attempts to log in outside of the designated window, the authentication is rejected by the system. Consequently, the host record will reflect anon-authenticatedstatus, and the device will remain restricted to the isolation or registration network until a valid login window is reached. " -FortiNAC-F Administration Guide: Guest and Contractor Templates Section.
NEW QUESTION # 44
Refer to the exhibit. An administrator wants to use FortiNAC-F to automatically provision printers throughout their organization. Each building uses its own local VLAN for printers.
Which FortiNAC-F feature would allow this to be accomplished with a single network access policy?
Answer: A
Explanation:
The FortiNAC-F Logical Network feature is specifically designed to provide an abstraction layer between high-level security policies and the underlying physical network infrastructure. In large- scale deployments where different physical locations (like Building 1, 2, and 3 in the exhibit) use different local VLAN IDs for the same type of device (e.g., VLAN 10, 20, and 30 for printers), managing separate policies for each building would create significant administrative overhead.
By using a Logical Network, an administrator can create a single entity--for example, a logical network named "Printers"--and use it as the "Access Value" in a single Network Access Policy.
The mapping of this logical label to a specific physical VLAN occurs at the Model Configuration level for each network device. When a printer connects to a switch in Building 1, FortiNAC-F evaluates the policy, identifies that the printer should be in the "Printers" logical network, and checks the Model Configuration for that specific switch to see which VLAN ID is mapped to that label (VLAN 10). If the same printer moves to Building 3, the same single policy applies, but FortiNAC-F provisions it to VLAN 30 based on the local mapping for that building's switch.
This architectural approach ensures that policies remain consistent and easy to manage regardless of the complexity or variations in the local network topology.
"Logical Networks provide a way to define a network access requirement once and apply it across many different network devices that may use different VLAN IDs for that access... Each managed device can use different VLAN IDs for the same Logical Network label. You can define the Logical Networks based on requirements and then associate the network to a VLAN ID when the managed device is configured in the Model Configuration."
NEW QUESTION # 45
An organization has FortiNAC-F deployed and is using layer 3 isolation networks across multiple sites with firewalls.
At a minimum, which three protocols must be allowed between the isolation networks and FortiNAC-F? (Choose three.)
Answer: A,B,E
Explanation:
DHCP must be allowed so endpoints in the isolation network can obtain an IP address. DNS must be permitted so isolated hosts can resolve the FortiNAC-F hostname or required resources.
HTTP/HTTPS must be allowed to enable redirection and communication with the FortiNAC-F captive portal for registration and authentication.
NEW QUESTION # 46
Refer to the exhibits.
Based on the given configurations and settings, on which date and time would a guest account created at 8:00 AM on 2025/09/12 expire?
Answer: B
Explanation:
In FortiNAC-F, the expiration of a guest or contractor account is determined by the configuration settings within theAccount Creation Wizardand the associatedGuest/Contractor Template. While a template can define a default " Account Duration " (as seen in the 12-hour setting in the second exhibit), theAccount Creation Wizardallows an administrator to manually specify or override the start and end parameters for a specific user session.
According to theFortiNAC-F Administration Guideregarding guest management, theAccount End Datefield in the creation wizard is the definitive timestamp for when the account object will be disabled or deleted from the system. In the provided exhibit (Account Creation Wizard), the administrator has explicitly set theAccount Start Dateto2025/09/12 08:00:00and theAccount End Dateto2025/09/13 17:00:00.
Even though the template indicates an " Account Duration " of 12 hours, this value typically serves as a pre- populated default. When a manual date and time are entered into the wizard, those specific values take precedence for that individual account. The account will remain active and valid until5:00 PM (17:00:00)on the following day,2025/09/13. It is also important to note the " Login Availability " from the template (8:00 AM - 7:00 PM); while the accountexistsuntil the 13th at 17:00:00, the user would only be able to authenticate during the active hours defined by the login schedule on both days.
" When creating an account, the administrator can select a template to provide default settings. However, specific values such as theAccount End Datecan be modified within theAccount Creation Wizard. The date and time specified in the ' Account End Date ' field determines the absolute expiration of the account. Once this time is reached, the account is moved to an expired state and the user ' s network access is revoked. " - FortiNAC-F Administration Guide: Guest and Contractor Account Management.
NEW QUESTION # 47
Two FortiNAC-F devices have been configured as a 1+1 HA pair. The primary server went offline and a successful failover to the secondary has occurred.
What happens if the primary server comes back online?
Answer: D
Explanation:
In a 1+1 HA configuration, once failover has occurred and the secondary assumes control, it remains the active controller when the original primary comes back online. The restored primary rejoins as the standby unit, and control is not automatically reverted.
NEW QUESTION # 48
......
In modern society, everything is changing so fast with the development of technology. If you do no renew your knowledge and skills, you will be wiped out by others. Our NSE6_FNC_AD-7.6 guide materials also keep up with the society. After all, new technology has been applied in many fields. So accordingly our NSE6_FNC_AD-7.6 Exam Questions are also applied with the latest technologies to be up to date. You can free download the demos to check that how wonderful our NSE6_FNC_AD-7.6 learning praparation is!
Reliable NSE6_FNC_AD-7.6 Braindumps Sheet: https://www.verifieddumps.com/NSE6_FNC_AD-7.6-valid-exam-braindumps.html