Pass4Test는 고객님의 IT자격증취득의 작은 소원을 이루어지게 도워드리는 IT인증시험덤프를 제공해드리는 전문적인 사이트입니다. Pass4Test 표 API인증API-SIEE시험덤프가 있으면 인증시험걱정을 버리셔도 됩니다. Pass4Test 표 API인증API-SIEE덤프는 시험출제 예상문제를 정리해둔 실제시험문제에 가장 가까운 시험준비공부자료로서 공을 들이지않고도 시험패스가 가능합니다.
| 주제 | 소개 |
|---|---|
| 주제 1 |
|
| 주제 2 |
|
| 주제 3 |
|
| 주제 4 |
|
| 주제 5 |
|
| 주제 6 |
|
| 주제 7 |
|
우리Pass4Test에는 아주 엘리트 한 전문가들로 구성된 팀입니다 그들은 끈임 없는 연구와 자기자신만의 지식으로 많은 IT관연 덤프자료를 만들어 냄으로 여러분의 꿈을 이루어드립니다, 기존의 시험문제와 답과 시험문제분석 등입니다. Pass4Test에서 제공하는API API-SIEE시험자료의 문제와 답은 실제시험의 문제와 답과 아주 비슷합니다. Pass4Test덤프들은 모두 보장하는 덤프들이며 여러분은 과감히 Pass4Test의 덤프를 장바구니에 넣으세요. Pass4Test에서 여러분의 꿈을 이루어 드립니다.
질문 # 96
A visual inspection includes verification of all the following except:
정답：D
설명：
The correct answer isDbecause aPoint-to-Point testis anelectrical continuity and functional verification test, not a visual inspection activity. In API source inspection and quality surveillance of electrical equipment, a visual inspection is concerned with what can be directly observed and compared against approved documentation, specifications, and fabrication requirements. This includes verifying that the equipment arrangement matches applicable drawings, checkingnameplate datafor correctness, confirming thatgrounding provisionsare present and properly installed, and ensuring the physical build appears consistent with design requirements.
APoint-to-Point test, by contrast, is performed to verify that wiring connections are electrically correct from one termination point to another. It is typically part of checkout, continuity verification, or functional testing rather than a simple visual examination. That is why options A, B, and C all fall within the scope of visual inspection, while D does not.
From a source inspector's standpoint, the distinction matters because visual checks confirm physical conformance, whereas point-to-point testing confirms circuit correctness and wiring integrity through an active test process.
질문 # 97
According to API 541, exterior surfaces, with the exception of machined surfaces or corrosion resistant material, shall be coated with which of the following?
정답：A
설명：
The correct answer isCbecause API 541 requires theexternal non-machined surfacesof large electric motors to be protected by apaint coating system, typically the manufacturer's or vendor's standard paint unless the purchase specification calls for a special coating system. The wording in the question is important: it excludesmachined surfacesandcorrosion-resistant material. That exclusion points away from general preservation compounds and toward the normal protective finish applied to the motor exterior during manufacture. In source inspection practice, this is verified by checking the motor surface preparation, coating application, finish quality, and compliance with the purchaser's specification.
The other options do not fit the normal API 541 requirement for general exterior finishing.Heavy shipping greaseis used for temporary protection, not standard external finishing.Oil soluble rust preservativeis more appropriate formachined or exposed metal surfacesrequiring temporary corrosion protection during storage or shipment.Inorganic zincmay be used in special coating systems, but it is not the default API 541 requirement for all motor exterior surfaces. Therefore, the correct API 541 based answer isvendor's standard paint.
질문 # 98
What tool is designed to measure mechanical oscillations?
정답：D
설명：
The correct answer isD. Vibration Meter. A vibration meter is specifically intended to measuremechanical oscillations, usually in terms of displacement, velocity, or acceleration. In source inspection of large electrical equipment, especiallyelectric motors over 500 HP, vibration measurement is important because excessive vibration can indicate problems such as rotor imbalance, shaft misalignment, bearing defects, looseness, soft foot, resonance, or installation errors. Since the API source inspection guide covers surveillance and verification activities for major rotating electrical equipment, understanding the purpose of vibration- measuring instruments is directly relevant to factory testing, condition verification, and acceptance evaluation.
The other options are not correct for this function. Atachometermeasures rotational speed, not mechanical oscillation. Aspectroscopeis used for optical spectrum analysis and is unrelated to machinery vibration.
Anoscilloscopedisplays electrical waveforms and can show signals from sensors, but it is not the primary instrument designed specifically to measure machine vibration in routine inspection practice. Therefore, the best answer isVibration Meter, because it directly measures the mechanical oscillatory behavior of equipment.
질문 # 99
Deviations from specifications must be approved by the:
정답：D
설명：
The correct answer isDbecause anydeviation from the approved specification, code requirement, purchase document, or design basismust be formally accepted by theresponsible engineer, not simply by manufacturing, quality, or inspection personnel. In source inspection practice, the manufacturer's engineer may identify or propose a deviation, and the vendor's quality manager may document it within the nonconformance system, but neither of them has final authority to approve a change that affects design intent, technical compliance, or purchaser requirements. The inspection coordinator also manages logistics and communication, but is not the technical approval authority.
This is a fundamental principle in API-aligned source inspection and surveillance. The source inspector verifies conformance to the approved drawings, specifications, and referenced standards. When a deviation is found, it must be handled through the formal deviation or concession process and resolved by the party with technical design responsibility. That is why theresponsible engineeris the correct approving authority. This preserves engineering accountability, maintains traceability, and ensures that any departure from specification is technically evaluated before acceptance. Therefore,option Dis the verified answer.
질문 # 100
The Arc Flash PPE is required for:
정답：D
설명：
The correct answer isC. Arc flash PPE is required when a task exposes a worker to the possibility of anarc flash hazard, especially when testing or working onenergized conductors or circuit parts.Voltage testing in AC systemson energized equipment is a recognized task that can place the worker within the arc flash boundary, because probes, tools, or inadvertent contact can initiate an arcing fault. For this reason, proper arc-rated clothing and related PPE are required whenever the task assessment identifies arc flash exposure.
The other options describe tasks that are generally considered lower risk when performed under normal conditions. Work oncontrol circuits below 120 VACdoes not usually present the same arc flash risk level.
Removing coverson properly installed wireways, junction boxes, and cable trays is not automatically an arc flash task unless it exposes energized parts and abnormal conditions exist.Insulated cable examination with no manipulation of the cableis also typically not treated as an arc flash exposure task.
From a source inspection and electrical safety perspective, the key principle is thatPPE selection is based on exposure to energized conductors and the likelihood of initiating an arc event, which makesCthe verified best answer.
질문 # 101
......
Pass4Test의API인증 API-SIEE 덤프는 수많은 시험준비 공부자료 중 가장 믿음직합니다. Pass4Test의 인지도는 업계에 널리 알려져 있습니다. API인증 API-SIEE덤프로API인증 API-SIEE시험을 준비하여 한방에 시험패스한 분이 너무나도 많습니다. API인증 API-SIEE덤프는 실제API인증 API-SIEE시험문제에 초점을 맞추어 제작한 최신버전 덤프로서 시험패스율이 100%에 달합니다.
API-SIEE시험난이도: https://www.pass4test.net/API-SIEE.html