P.S. Free 2026 Fortinet NSEI_OTS_AR-7.6 dumps are available on Google Drive shared by Prep4sureExam: https://drive.google.com/open?id=18b-YBBHAWlnpgqRZZhMWWbYihRy_Y5O2
Nowadays, using computer-aided software to pass the NSEI_OTS_AR-7.6 exam has become a new trend. Because the new technology enjoys a distinct advantage, that is convenient and comprehensive. In order to follow this trend, our company product such a NSEI_OTS_AR-7.6 exam questions that can bring you the combination of traditional and novel ways of studying. The passing rate of our study material is up to 99%. If you are not fortune enough to acquire the NSEI_OTS_AR-7.6 Certification at once, you can unlimitedly use our product at different discounts until you reach your goal and let your dream comes true.
| Section | Weight | Objectives |
|---|---|---|
| Network Access Control | 25% | - Purdue Model and secure network segmentation - Authentication and access policies for OT devices - OT Ethernet and industrial communication models |
| Asset Management | 25% | - OT security standards and compliance (IEC 62443, NIST) - Fortinet Security Fabric for OT environments - Device detection and inventory using FortiGate & FortiNAC |
| Network Security | 25% | - Deep inspection for industrial protocols (Modbus, DNP3, OPC) - Virtual patching for legacy OT systems - Security automation and threat response |
| Monitoring and Risk Assessment | 25% | - Threat detection using FortiSIEM 7.4 - Event handling and logging with FortiAnalyzer 7.6 - OT-focused risk assessment and management |
>> NSEI_OTS_AR-7.6 Certificate Exam <<
Today is the right time to learn new and in demands skills. You can do this easily, just get registered in Fortinet NSE I - OT Security 7.6 Architect NSEI_OTS_AR-7.6 certification exam and start preparation with Fortinet NSEI_OTS_AR-7.6 exam dumps. The Fortinet NSE I - OT Security 7.6 Architect NSEI_OTS_AR-7.6 pdf questions and practice test are ready for download. Just pay the affordable Fortinet NSEI_OTS_AR-7.6 authentic dumps charges and click on the download button. Get the Channel Partner Program Fortinet NSE I - OT Security 7.6 Architect NSEI_OTS_AR-7.6 latest dumps and start preparing today.
NEW QUESTION # 37
Refer to the exhibit.
Which statement about this partial Asset Identity List page is correct? (Choose one answer)
Answer: A
Explanation:
Based on the OT Security 7.6 Architect study guide regarding the Asset Identity Center and Asset Management :
* Vulnerability Visibility : The Asset Identity List tab displays key metadata for IT and OT devices, including detected addresses, users, and a specific column for Vulnerabilities .
* Virtual Patching Feature : In the OT Security 7.6 architecture, the " Vulnerabilities " column is populated through the OT Security Service license, which includes " OT vulnerability correlation definitions & virtual patching signatures " .
* Correlation Mechanism : FortiGate extracts metadata from OT traffic and uses these signatures to identify known vulnerabilities on the assets. For these vulnerabilities to be identified and correlated in the Asset Identity Center as shown in the exhibit (displaying a count of 8 vulnerabilities), the Virtual Patching feature must be active.
* Architectural Implementation : Virtual patching is a critical component of the " Protection " layer in OT networks, allowing administrators to secure legacy or unpatchable PLCs and RTUs by blocking exploit attempts at the network level using IPS-based virtual patching signatures.
* Exhibit Analysis : The presence of identified vulnerabilities (the number " 8 " in the red shield) in the Asset Identity List confirms that the FortiGate is actively performing vulnerability correlation, which is the operational result of having a Virtual Patching security profile applied to the relevant firewall policy.
NEW QUESTION # 38
In your OT environment, you want to detect the devices passively. Which two methods must you implement?
(Choose two answers)
Answer: C,D
Explanation:
The correct answers are C. Vendor OUI and D. Network traffic .
The study guide explicitly separates active/direct profiling methods from passive/non-direct methods and states that "In OT environments, passive methods are preferred over active methods." It then lists the methods that do not require FortiNAC to interact directly with the device being profiled. Among those methods are "Network traffic: gathered from the infrastructure" and "Vendor OUI: determined by the MAC address gathered from the infrastructure." That directly matches options C and D .
Options A and B are incorrect because SSH and SNMP are shown in the guide under the direct/active profiling methods. The guide's point is that passive detection avoids directly scanning or interacting with OT endpoints, since that can negatively affect performance in industrial environments. Because the question specifically asks for passive detection methods, the correct pair is Vendor OUI and Network traffic .
NEW QUESTION # 39
During layer 2 polling , which two pieces of information are gathered by FortiNAC to identify a device?
(Choose two answers)
Answer: A,D
Explanation:
According to the OT Security 7.6 Architect study guide section on Asset Management , specifically regarding FortiNAC Visibility :
* Layer 2 Polling Data : Because each physical address is unique, FortiNAC identifies hosts as they connect to the network. The information gathered during this process fills in the physical address and location information in the database.
* Visibility Components : The guide states that the physical address learned , the time it was learned , and where it was learned from provide the foundation of endpoint visibility in the form of " what, where, and when " information. This confirms that Where it was learned (Option A) and The time it was learned (Option D) are correct.
* Exclusions :
* Layer 3 Polling : The MAC-to-IP correlation (Option B) is explicitly defined as a function of Layer 3 polling , where the correlated IP address is added to the database record for the corresponding MAC address.
* DHCP Fingerprinting : The host name or system name (Option C) and the operating system are gathered via DHCP fingerprinting , not layer 2 polling.
NEW QUESTION # 40
Refer to the exhibit.
A partial Incident Analysis page is shown. How was the 360-Degree Security Review OT report attached to the incident? (Choose one answer)
Answer: A
Explanation:
The study guide says playbooks are used to automate tasks such as running reports and creating/updating incidents . It also says that after a playbook is triggered, it flows through its configured tasks.
It further shows a sample playbook sequence where an event is detected, an incident is created , a report runs , and details are attached to the incident . That is exactly the kind of workflow shown in the incident analysis view.
By contrast, the study guide says event handlers generate events when logs match configured rules. Event handlers are for detection, not for attaching reports to incidents.
NEW QUESTION # 41
Refer to the exhibit.
A Virtual Patching profile is shown. You have recently updated your SCADA system and would like to apply the SCADA virtual patching profile. Which two statements about this profile are correct? (Choose two answers)
Answer: A,C
Explanation:
The correct answers are B and D .
Option B is correct because the profile has Medium , High , and Critical selected, while Low severity is not selected. That means low-severity virtual patching signatures are not enforced by this profile. So for the device with MAC address 12:12:12:12:12 , low-severity signatures are not blocked. The study guide explains virtual patching as device-specific protection where "FortiGate caches the signatures and mitigation rules that apply to each device" and applies them when the related traffic matches the firewall policy.
Option D is correct because the Virtual Patching Exemptions table shows a row with the MAC address 11:
11:11:11:11 and no specific signature listed. The study guide states that in the Virtual Patching profile you can "Exempt a specific device with the MAC address or a specific signature." A MAC-only exemption means that specific device is excluded from virtual patching enforcement, so in practical terms it is treated as having no applicable vulnerabilities in this profile.
Option C is incorrect because the profile does not block critical signatures for all devices. The exemptions list proves that at least one device can be excluded by MAC address, and a specific signature can also be exempted. Therefore, enforcement is not universal across all devices.
Option A is incorrect because the entry Schneider.Electric.ClearSCADA.HTTP.Interface.XSS appears as a specific signature exemption , not as the only remaining vulnerability. The profile display is showing exemptions, not a statement that only one vulnerability is still present.
NEW QUESTION # 42
......
You may urgently need to attend NSEI_OTS_AR-7.6 certificate exam and get the NSEI_OTS_AR-7.6 certificate to prove you are qualified for the job in some area. But what certificate is valuable and useful and can help you a lot? Passing the NSEI_OTS_AR-7.6 test certification can help you prove that you are competent in some area and if you buy our NSEI_OTS_AR-7.6 Study Materials you will pass the NSEI_OTS_AR-7.6 test almost without any problems. There are many benefits after you pass the NSEI_OTS_AR-7.6 certification such as you can enter in the big company and double your wage.
NSEI_OTS_AR-7.6 Practice Exams Free: https://www.prep4sureexam.com/NSEI_OTS_AR-7.6-dumps-torrent.html
DOWNLOAD the newest Prep4sureExam NSEI_OTS_AR-7.6 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=18b-YBBHAWlnpgqRZZhMWWbYihRy_Y5O2