BTW, DOWNLOAD part of itPass4sure NSE7_OTS-7.2 dumps from Cloud Storage: https://drive.google.com/open?id=1h96AlJ5eZ4mVrClBIYfuhR40ml9qKrLt
The free demo NSE7_OTS-7.2 practice question is available for instant download. Download the NSE7_OTS-7.2 exam dumps demo free of cost and explores the top features of Fortinet NSE7_OTS-7.2 exam questions and if you feel that the Fortinet NSE7_OTS-7.2 Exam Questions can be helpful in Fortinet NSE 7 - OT Security 7.2 (NSE7_OTS-7.2) exam preparation then take your buying decision.
| Section | Weight | Objectives |
|---|---|---|
| Monitoring and Risk Assessment | 25% | - Security event analysis and reporting - Risk assessment and mitigation strategies - Logging and monitoring with FortiAnalyzer, FortiSIEM - Security automation and response |
| Network Access Control | 25% | - Device authentication and authorization - Availability and redundancy design - Network segmentation between IT and OT - Industrial network protocols and standards |
| Asset Management | 25% | - OT asset identification and classification - Vulnerability assessment for OT assets - Asset inventory and lifecycle management |
| Protecting OT Network | 25% | - Threat prevention and filtering - IPS and application control for OT environments - Security policy design for ICS/SCADA - Industrial protocol security |
>> Valid Braindumps NSE7_OTS-7.2 Ppt <<
Our team of professionals and experts has prepared NSE7_OTS-7.2 vce dumps by keeping the vigilant eyes on the current exam information and exam requirements. In case you failed exam with our NSE7_OTS-7.2 study guide we will get you 100% money back guarantee and you can contact our support if you have any questions about our NSE7_OTS-7.2 Real Dumps. We will be your support when you need us anytime.
NEW QUESTION # 17
To increase security protection in an OT network, how does application control on ForliGate detect industrial traffic?
Answer: D
NEW QUESTION # 18
Refer to the exhibit. PLC-3 and CLIENT can send traffic to PLC-1 and PLC-2. FGT-2 has only one software switch (SSW-1) connecting both PLC-3 and CLIENT. PLC-3 and CLIENT cannot send traffic to each other. Which two statements about the traffic between PCL-1 and PLC-2 are true? (Choose two.)
Answer: A,B
NEW QUESTION # 19
Refer to the exhibit.
An OT network security audit concluded that the application sensor requires changes to ensure the correct security action is committed against the overrides filters.
Which change must the OT network administrator make?
Answer: D
Explanation:
According to the Fortinet NSE 7 - OT Security 6.4 exam guide1, the application sensor settings allow you to configure the security action for each application category andnetwork protocol override. The security action determines how the FortiGate unit handles traffic that matches the application category or network protocol override. The security action can be one of the following:
* Allow: The FortiGate unit allows the traffic without any further inspection.
* Monitor: The FortiGate unit allows the traffic and logs it for monitoring purposes.
* Block: The FortiGate unit blocks the traffic and logs it as an attack.
The priority of the network protocol override determines the order in which the FortiGate unit applies the security action to the traffic. The lower the priority number, the higher the priority. For example, a priority of
1 is higher than a priority of 10.
In the exhibit, the application sensor has the following settings:
* The industrial category has a security action of allow, which means that the FortiGate unit will not inspect or log any traffic that belongs to this category.
* The IEC.60870.5.104 Information.Transfer network protocol override has a security action of block, which means that the FortiGate unit will block and log any traffic that matches this protocol.
* The IEC.60870.5.104 Control.Functions network protocol override has a security action of monitor, which means that the FortiGate unit will allow and log any traffic that matches this protocol.
* The IEC.60870.5.104 Start/Stop network protocol override has a security action of allow, which means that the FortiGate unit will not inspect or log any traffic that matches this protocol.
* The IEC.60870.5.104 Transfer.C.BO.NA.1 network protocol override has a security action of block, which means that the FortiGate unit will block and log any traffic that matches this protocol.
The problem with these settings is that the IEC.60870.5.104 Transfer.C.BO.NA.1 network protocol override has a lower priority than the IEC.60870.5.104 Information.Transfer network protocol override. This means that if the traffic matches both protocols, the FortiGate unit will apply the security action of the higher priority override, which is block. However, the IEC.60870.5.104 Transfer.C.BO.NA.1 protocol is used to transfer binary outputs, which are essential for controlling OT devices. Therefore, blocking this protocol could have negative consequences for the OT network.
To fix this issue, the OT network administrator must set the priority of the IEC.60870.5.104 Transfer.C.BO.
NA.1 network protocol override to 1, which is higher than the priority of the IEC.60870.5.104 Information.
Transfer network protocol override. This way, the FortiGate unit will apply the security action of the lower priority override, which is allow, to the traffic that matches both protocols. This will ensure that the FortiGate unit does not block the traffic that is used to transfer binary outputs, while still blocking the traffic that is used to transfer information.
1: NSE 7 Network Security Architect - Fortinet
NEW QUESTION # 20
Which three criteria can a FortiGate device use to look for a matching firewall policy to process traffic?
(Choose three.)
Answer: A,B,C
Explanation:
The three criteria that a FortiGate device can use to look for a matching firewall policy to process traffic are:
A: Services defined in the firewall policy - FortiGate devices can match firewall policies based on the services defined in the policy, such as HTTP, FTP, or DNS.
D: Destination defined as internet services in the firewall policy - FortiGate devices can also match firewall policies based on the destination of the traffic, including destination IP address, interface, or internet services.
E: Highest to lowest priority defined in the firewall policy - FortiGate devices can prioritize firewall policies based on the priority defined in the policy. The device will process traffic against the policy with the highest priority first and move down the list until it finds a matching policy.
NEW QUESTION # 21
Refer to the exhibit.
An OT architect has implemented a Modbus TCP with a simulation server Conpot to identify and control the Modus traffic in the OT network. The FortiGate-Edge device is configured with a software switch interface ssw-01.
Based on the topology shown in the exhibit, which two statements about the successful simulation of traffic between client and server are true? (Choose two.)
Answer: A,D
NEW QUESTION # 22
......
We can provide you with efficient online services during the whole day, no matter what kind of problems or consultants about our NSE7_OTS-7.2 quiz torrent; we will spare no effort to help you overcome them sooner or later. First of all, we have professional staff with dedication to check and update out NSE7_OTS-7.2 Exam Torrent materials on a daily basis, so that you can get the latest information from our NSE7_OTS-7.2 exam torrent at any time. Besides our after-sales service engineers will be always online to give remote guidance and assistance for you on NSE7_OTS-7.2 study questions if necessary.
New NSE7_OTS-7.2 Dumps Book: https://www.itpass4sure.com/NSE7_OTS-7.2-practice-exam.html
DOWNLOAD the newest itPass4sure NSE7_OTS-7.2 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1h96AlJ5eZ4mVrClBIYfuhR40ml9qKrLt