DOWNLOAD the newest Prep4SureReview VNX301 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1Xp2g6TpIGWAVA6ESQpDT9T37Zpyk8m55
You can download and try out our Versa Certified SD-WAN Specialist (VNX300) exam torrent freely before you purchase our product. Our product provides the demo thus you can have a full understanding of our VNX301 prep torrent. Our study materials can boosts your confidence for real exam, and will help you remember the exam questions and answers that you will take part in. You can decide which version is what you need actually and then buy the version of Versa Certified SD-WAN Specialist (VNX300) exam torrent you want.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
>> Practice VNX301 Exam Pdf <<
Our Versa Networks VNX301 web-based practice exam software also simulates the Versa Certified SD-WAN Specialist (VNX300) (VNX301) environment. These Versa Networks VNX301 mock exams are also customizable to change the settings so that you can practice according to your preparation needs. Prep4SureReview web-based VNX301 Practice Exam software is usable only with a good internet connection. You can use this Versa Networks VNX301 version on any operating system, and this software is accessible through any browser like Opera, Safari, Chrome, Firefox, and IE.
NEW QUESTION # 20
As an administrator, you are migrating your legacy WAN to Versa Secure SD-WAN without changing the underlay network. You need to ensure that, during the migration process, legacy WAN sites are allowed to communicate with SD-WAN branches. Which two steps should be implemented to accomplish this task?
(Choose two.)
Answer: A,B
Explanation:
The correct answers are B and C . During a migration from a legacy WAN, such as MPLS Layer 3 VPN, to Versa Secure SD-WAN, an SD-WAN gateway is used to allow communication between SD-WAN-enabled branches and legacy WAN sites. Versa SD-WAN design guidance states that an SD-WAN gateway allows sites connected to the SD-WAN VPN network to communicate with sites connected to a legacy MPLS VPN network. It also explains that this gateway facilitates route exchange between the MPLS underlay network and the SD-WAN VPN network, typically using a dynamic routing protocol such as BGP.
For this design, the hub or gateway must be configured with the Gateway option for the underlay transport so it can act as the interconnect point between the legacy and SD-WAN domains. Versa documentation further describes configuring a BGP peering session on the MPLS transport VR of the gateway to exchange routes from the MPLS provider to the SD-WAN network, and notes that Director Workflows can automate this configuration. Spoke-to-Spoke-Direct is not sufficient for legacy interconnect, and SD-WAN traffic steering policies do not advertise routes.
NEW QUESTION # 21
You are onboarding a branch with one WAN and one LAN interface. After a successful branch activation, the branch is not able to reach the Versa Controller. You realize that the WAN gateway IP address originally entered under the Device Bind Data menu in Versa Director is incorrect. Which action will you perform to solve the problem?
Answer: B
Explanation:
The correct action is to update the WAN gateway IP address in Device Bind Data and onboard the branch appliance again. Device Bind Data supplies site-specific values, such as WAN interface addressing and gateway information, that are merged with the workflow and template configuration during onboarding. If the wrong WAN gateway is entered, the branch may activate successfully from a workflow perspective, but the resulting WAN routing configuration is incorrect. As a result, the branch cannot establish proper transport reachability to the Controller. Versa troubleshooting documentation explains that, after establishing transport connectivity from a branch to a Controller, at least one WAN interface must be available, and the branch then establishes IKE-based IPsec connectivity to the Controller. If that IKE/IPsec connectivity fails, the Controller- facing ptvi interface remains down.
Changing the configuration only from the Appliance context is not the best answer because the incorrect value originated in the bind-data source used for provisioning. Modifying it manually from the branch CLI is also not recommended because the device is managed by Versa Director and template-driven configuration. Resetting the device does not automatically discover or "ping" the correct gateway. The correct remediation is to fix the bind data and repeat onboarding so the branch receives the correct generated configuration.
NEW QUESTION # 22
Examine the exhibit below.
You are configuring an IPsec tunnel towards a non-SD-WAN site over the INETTransport-VR. The site IP address is 10.1.1.1. This tunnel is for traffic between the 192.168.100.0/24 and the 192.168.200.0/24 LAN networks. The tunnel does not establish.
Referring to the exhibit, which statement is correct?
Answer: D
Explanation:
The correct answer is A . The exhibit shows that the IPsec VPN is being configured with Tunnel Routing Instance: XIAN-Control-VR . However, the question states that the tunnel is toward a non-SD-WAN site over the INET-Transport-VR . For a site-to-site IPsec tunnel, the tunnel routing instance must match the routing instance used to reach the peer public IP address. In this case, the remote non-SD-WAN peer is
10.1.1.1 , and the intended underlay transport is INET-Transport-VR , not the Control VR.
Versa troubleshooting documentation explains that routing instances are used to define where traffic is sourced and forwarded. For example, configuration examples select routing instances when enabling services or initiating tests, and traffic must use the correct WAN or transport routing instance to reach the remote endpoint. Versa branch troubleshooting also emphasizes that after transport connectivity is available, the branch establishes IKE-based IPsec connectivity; if that connectivity fails, the IPsec-related interface remains down.
Changing the routing instance to global would not be correct because the intended path is specifically INET-Transport-VR. A higher precedence value is not required to establish the tunnel. The policy selector shown already defines local-to-remote interesting traffic, and the key failure is the incorrect tunnel routing instance.
NEW QUESTION # 23
You need to quickly check interface administrative status, operational status, tenant ID, VRF, MAC address, and IP address on a VOS device. Which command should you use?
Answer: B
Explanation:
The correct answer is A . Versa's handy CLI command reference lists show interfaces brief as the command used to view a list of interfaces along with their MAC addresses, operational and administrative status, tenant ID, VRF, and IP addresses. This is one of the first commands administrators run when validating device bring- up, staging interface assignment, WAN/LAN mapping, or whether a template applied interface addressing as expected.
For deeper interface troubleshooting, show interfaces detail provides additional information such as interface index, host interface, MTU, speed and duplex settings, RX/TX errors, and bridge information. However, for a quick overview of state and addressing across interfaces, show interfaces brief is the correct choice.
show system package-info identifies the running VOS software package. show system storage reports system storage resources. show coredumps shows generated core files. These are valuable operational commands, but they do not provide the requested interface status and addressing summary.
NEW QUESTION # 24
Which two statements are true about the differences between a stateful firewall and a next-generation firewall (NGFW) in a Versa solution? (Choose two.)
Answer: B,D
Explanation:
The correct answers are A and D . A Versa stateful firewall primarily enforces security by tracking connection state and matching packet/session information such as source, destination, zones, services, protocol, and L3/L4 attributes. Versa's CLI configuration guide shows stateful firewall access-policy match options for source and destination addresses, services, IP version, IP flags, DSCP, TTL, and also optional application and URL-category match fields when enhanced services are available.
A Versa NGFW extends this inspection model by adding deeper Layer 7 and UTM capabilities, such as IDS
/IPS, antivirus, URL filtering, file or data filtering, and application-aware enforcement. Versa's SD-WAN design guide specifically describes internet security using the Versa next-generation firewall with unified threat management features, including IDS/IPS and antivirus inspection for DIA traffic. Licensing is also a valid distinction: Versa's SD-WAN licensing overview describes NGFW features as part of solution tiers, so the availability of advanced security functions depends on the licensed tier or subscription
NEW QUESTION # 25
......
Now you do not need to worry about the relevancy and top standard of Prep4SureReview Versa Certified SD-WAN Specialist (VNX300) in VNX301 exam questions. These Versa Networks VNX301 dumps are designed and verified by qualified VNX301 exam trainers. Now you can trust Prep4SureReview VNX301 Practice Questions and start preparation without wasting further time. With the Prep4SureReview VNX301 exam questions, you will get everything that you need to learn, prepare and pass the challenging VNX301 exam with good scores.
VNX301 Instant Download: https://www.prep4surereview.com/VNX301-latest-braindumps.html
P.S. Free 2026 Versa Networks VNX301 dumps are available on Google Drive shared by Prep4SureReview: https://drive.google.com/open?id=1Xp2g6TpIGWAVA6ESQpDT9T37Zpyk8m55