What's more, part of that FreeDumps SRAN-Radio-Network-Performance-Optimization dumps now are free: https://drive.google.com/open?id=1HVEvPIQ7y1KVXzLNPgE4NyRMuciFyNUt
We respect privacy of buyers, and if you buying SRAN-Radio-Network-Performance-Optimization exam materials from us, we will ensure you that your personal information such as name and email address will be protected well and we won’t send junk mail to you. We can tell you that once you finish buying the SRAN-Radio-Network-Performance-Optimization exam dumps, your personal information will be concealed. Moreover SRAN-Radio-Network-Performance-Optimization Exam Dumps are famous for high quality, and you can pass the exam just one time. Free demo will offer to you, so that you can have a try before buying. If you indeed have other questions, just contact us.
| Section | Weight | Objectives |
|---|---|---|
| SRAN Optimization Tools and Reports | 10-15% | - Automated optimization features - Configuration management for optimization - Report generation and interpretation - Nokia NetAct and performance tools |
| Performance Troubleshooting | 20-25% | - Optimization case studies - Root cause analysis methodologies - Common performance issues diagnosis - Network failure identification and resolution - Troubleshooting tools utilization |
| SRAN Architecture and Fundamentals | 15-20% | - Single RAN integration principles - SRAN solution components and functions - SRAN network architecture overview - Radio access concepts and principles |
| Radio Network Performance Monitoring | 20-25% | - Performance data collection and analysis - Performance monitoring tools and dashboards - KPI definition and measurement - Threshold configuration and alerting - Real-time network monitoring techniques |
| Radio Network Optimization Techniques | 25-30% | - Load balancing techniques - Capacity optimization strategies - Coverage optimization methods - Interference analysis and mitigation - Parameter tuning best practices - Handover optimization |
>> SRAN-Radio-Network-Performance-Optimization Learning Engine <<
Our SRAN-Radio-Network-Performance-Optimization practice questions attract users from all over the world because they really have their own charm. No product like our SRAN-Radio-Network-Performance-Optimization study guide will seriously consider the needs of users in all aspects. From product content to system settings, we will give you what you want! Firstly, you definitely want to pass the exam for sure. Our SRAN-Radio-Network-Performance-Optimization Exam Questions are high-effective with a high pass rate as 98% to 100%. So don't hesitate, just come and buy our SRAN-Radio-Network-Performance-Optimization learning braindumps!
NEW QUESTION # 29
During an intra-gNB DU handover , what is the role of the RRC Reconfiguration message sent by the gNB- CU to the UE?
Answer: C
Explanation:
The correct answer is A .
During an intra-gNB DU handover , the UE is moved from one cell/DU resource to another under the same gNB-CU control. The gNB-CU coordinates the handover preparation and sends an RRC Reconfiguration message to the UE.
The role of this message is to provide the UE with the required handover command information, such as:
Target PCell configuration
Radio resource configuration
Mobility control information
Random access configuration, when needed
Measurement or reconfiguration-related information
After receiving the RRC Reconfiguration , the UE performs the handover execution procedure toward the target cell and later responds with RRC Reconfiguration Complete .
Option B is incorrect because admission control and source-cell scheduling suspension are internal network- side procedures, not the UE-facing role of the RRC Reconfiguration message.
Option C is not the best answer because user-plane resource transfer is handled between gNB-CU/gNB-DU functions, while dedicated preamble allocation may be part of the configuration but is not the main purpose of the message.
Option D is incorrect because RLC reestablishment and PDCP recovery are lower-layer/user-plane handling actions, not the primary purpose of the RRC Reconfiguration message.
Therefore, the correct role is:
It instructs the UE to perform handover to the target PCell and provides measurement/configuration information.
NEW QUESTION # 30
In a high-mobility network, the maximum cell size must be restricted to 33 km . Which PRACH format and restricted-set type should be used?
Answer: C
Explanation:
The correct answer is Format 1 / Type B .
For PRACH planning, the selected preamble format must support the required cell radius. Format 0 is too short for a 33 km cell because it is typically suitable only up to around 14.5 km . Format 2 is also not suitable because its practical maximum cell radius is around 29.5 km , which is below the required 33 km . Therefore, a longer PRACH format is needed.
Because the scenario mentions high mobility , an unrestricted PRACH set is not preferred. High-mobility environments require a restricted set to handle Doppler effects and reduce ambiguity in PRACH preamble detection. Between the restricted-set options, Type B is the correct choice for this 33 km high-mobility case.
A matching Nokia-style question source also lists this exact scenario with Format 1 / Type B as option A.
NEW QUESTION # 31
At which mark are all conditions fulfilled for energy saving , so the cell will be switched off? Refer to the image below.
Answer: A
Explanation:
The correct answer is B , which corresponds to mark C in the diagram.
In the diagram, the energy-saving process follows these stages:
Before mark B , the cell is entering the power-saving period, but the required load condition has not yet been satisfied for the required duration.
At mark B , the measured load has gone below the configured threshold, but the cell is not switched off immediately. The system must confirm that the load remains below the required threshold for the configured time.
At mark C , the load has stayed below the required threshold for the required duration, shown as 5 minutes in the diagram. At this point, all conditions are fulfilled, and the cell can be switched off. The diagram also shows the state becoming:
energySavingState = energySaving
Marks D and E are already inside or near the later part of the power-saving period. Mark E is associated with operator suspension/exit behavior, not the initial moment when all switch-off conditions are first fulfilled.
NEW QUESTION # 32
Which of these is a software solution targeted to provide NPO projects access to rich datasets, modern data analysis and visualization tools, with a high level of automation capability?
Answer: D
Explanation:
The correct answer is D .
NPAS is the correct software solution in this context. A public technical source describes NPAS as providing access to rich datasets and modern data analysis and visualization tools , which matches the wording of the question closely.
In Nokia/NPO project context, this type of platform is used to support network planning and optimization activities by enabling data ingestion, analysis, visualization, and automation. This helps engineers work with large RAN datasets more efficiently during optimization, modernization, and performance-improvement projects.
The other options are not the best match:
GeoSynthesis is more associated with geospatial/planning-style use cases.
MantaRay SON is related to SON automation and optimization functions.
LTEPAT is more LTE-focused and does not match the described broad analytics platform role.
Therefore, the correct answer is:
NPAS.
NEW QUESTION # 33
Single Network Slice Selection Assistance Information , or S-NSSAI , identifies a network slice. Which of the following statements are correct regarding NSSAI ? Refer to the diagram for basic information.
Answer: B
Explanation:
The correct answer is D: A, B, C, and D .
In 5G network slicing, S-NSSAI identifies a single network slice. It is composed of:
SST , or Slice/Service Type
SD , or Slice Differentiator
Statement A is correct.
The combination of SST + SD can uniquely identify a slice. For example, two slices may both use SST 1 for eMBB/MBB-type service, but different SD values can separate them for different enterprises, tenants, or service groups.
Statement B is correct.
SST is mandatory. It is an 8-bit numeric field that indicates the expected slice/service behavior, such as eMBB, URLLC, or mMTC.
Statement C is correct.
SD is optional. It is a 24-bit field used to differentiate multiple slices that may share the same SST.
Statement D is correct.
SST may use standardized values, such as SST 1 for eMBB, SST 2 for URLLC, and SST 3 for mMTC/MIoT.
It may also use operator-specific or non-standardized values depending on deployment requirements.
NEW QUESTION # 34
......
Choosing our SRAN-Radio-Network-Performance-Optimization real dumps as your study guide means you choose a smart and fast way to get succeed in the certification exam. There are accurate SRAN-Radio-Network-Performance-Optimization test answers and some explanations along with the exam questions that will boost your confidence to solve the difficulty of SRAN-Radio-Network-Performance-Optimization Practice Test. You will enjoy great benefits if you buy our SRAN-Radio-Network-Performance-Optimization braindumps now and free update your study materials one-year.
Latest SRAN-Radio-Network-Performance-Optimization Test Guide: https://www.freedumps.top/SRAN-Radio-Network-Performance-Optimization-real-exam.html
DOWNLOAD the newest FreeDumps SRAN-Radio-Network-Performance-Optimization PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1HVEvPIQ7y1KVXzLNPgE4NyRMuciFyNUt