DOWNLOAD the newest PassTorrent JN0-336 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1wZcrkCL6JqAmNYFLreYMZZph7bpIvnra
Under the tremendous stress of fast pace in modern life, sticking to learn for a JN0-336 certificate becomes a necessity to prove yourself as a competitive man. Nowadays, people in the world gulp down knowledge with unmatched enthusiasm, they desire new things to strength their brains. Our JN0-336 Practice Questions have been commonly known as the most helpful examination support materials and are available from global internet storefront. As long as you study with our JN0-336 exam questions, you are going to pass the exam without doubt.
| Section | Weight | Objectives |
|---|---|---|
| Security Policy | 25% | - Policy Components and Structure - Policy Logging - Policy Troubleshooting - Policy Scheduling |
| IPsec VPNs | 25% | - VPN Troubleshooting - Route-Based VPNs - VPN High Availability - Policy-Based VPNs - IKE Phase 1 and Phase 2 |
| Screen Options | 15% | - Screen Options Configuration - Custom Screen Options - Attack Detection and Mitigation |
| High Availability Clustering | 20% | - Failover Behavior - Configuration and Troubleshooting - Chassis Cluster Architecture - Control and Data Plane Synchronization |
| UTM (Unified Threat Management) | 15% | - Content Filtering - Web Filtering - Antivirus - Antispam |
>> JN0-336 Latest Test Cost <<
No software installation is required to go through the web-based Juniper JN0-336 practice test. The PDF file of JN0-336 real exam questions is easy to use on laptops, tablets, and smartphones. We have added all the Juniper JN0-336 Questions, which have a chance to appear in the JN0-336 real test. Our Security, Specialist (JNCIS-SEC) (JN0-336) dumps PDF exam questions are beneficial to prepare for the test in less time.
NEW QUESTION # 64
A pair of branch SRX Series devices are booted up in cluster mode.
Referring to the exhibit, which statement is correct?
Answer: C
Explanation:
The correct answer is C. fxp0 or fxp1 on either device has an existing configuration. The exhibit shows each node reporting itself in hold state and the peer as lost under redundancy group 0. Juniper's chassis cluster troubleshooting documentation shows this same hold/lost symptom and states that when a node is in hold, it is not ready to operate in a chassis cluster. For branch SRX devices, when cluster mode is enabled, specific physical interfaces are automatically converted into fxp0 for out-of-band management and fxp1 for the HA control link. These interfaces cannot retain normal transit or standalone interface configuration. If the ports that become fxp0 or fxp1 already have configuration, the cluster can enter the hold/lost condition shown in the exhibit.
Option A is wrong because the output does not indicate a Junos version mismatch. Option B is wrong because hardware mismatch is not the symptom being shown. Option D is too specific: a factory-default configuration can cause this problem because it may include configuration on interfaces that become fxp0/fxp1, but the exhibit does not prove specifically that node1 alone is running factory-default configuration. The tested issue is the existing configuration on the interfaces reserved for chassis-cluster management/control. Reference topics: HA Clustering, chassis cluster hold/lost state, fxp0, fxp1, branch SRX cluster initialization.
NEW QUESTION # 65
Exhibit
You just finished setting up your command-and-control (C&C) category with Juniper ATP Cloud. You notice that all of the feeds have zero objects in them.
Which statement is correct in this scenario?
Answer: D
Explanation:
According to the Juniper Networks JNCIS-SEC Study Guide, when you set up your command-and- control (C&C) category with Juniper ATP Cloud, all of the feeds will initially have zero objects in them.
This is normal, as it can take a few minutes for the feeds to download. No action is required in this scenario and you will notice the feeds start to populate with objects once the download is complete.
NEW QUESTION # 66
When a security policy is deleted, which statement is correct about the default behavior of active sessions allowed by that policy?
Answer: D
Explanation:
When a security policy is deleted, the existing sessions that were previously allowed by that policy are not immediately dropped; instead, they are typically treated as legacy flows. This means they are allowed to continue until they naturally end or until the session timeout is reached. This behavior ensures that deleting a policy does not abruptly disrupt ongoing traffic flows that were previously authorized by that policy. This approach helps in avoiding unintended service disruptions, especially in production environments where active connections may be critical to operations.
NEW QUESTION # 67
Which two statements are correct about a reth LAG? (Choose two.)
Answer: A,B
Explanation:
A reth LAG is a redundant Ethernet link aggregation group that combines multiple physical interfaces into a single logical interface in a chassis cluster. A reth LAG provides load balancing and redundancy for traffic within or between redundancy groups. Two statements that are correct about a reth LAG are:
Links must have the same speed and duplex setting: To form a reth LAG, the physical interfaces must have the same speed and duplex setting. This ensures that the links can operate at the same capacity and avoid performance issues or errors.
You should have two or more interfaces: To create a reth LAG, you need to have at least two physical interfaces. One interface should be connected to node 0 and the other interface should be connected to node 1. You can also have more than two interfaces in a reth LAG for increased bandwidth and redundancy.
Reference: = Configuring Redundant Ethernet Interfaces, [Understanding Redundant Ethernet Interfaces]
NEW QUESTION # 68
Which two statements about SRX Series device chassis clusters are correct? (Choose two.)
Answer: B,C
Explanation:
Two statements that are correct about SRX Series device chassis clusters are:
The chassis cluster data plane is connected with revenue ports: A chassis cluster is a high-availability feature that groups two identical SRX Series devices into a cluster that acts as a single device. The cluster has two types of links: control links and fabric links. The control links are used for exchanging heartbeat messages and configuration synchronization between the nodes. The fabric links are used for forwarding data traffic between the nodes. The fabric links are connected with revenue ports, which are regular Ethernet interfaces that can also be used for normal traffic when not in cluster mode.
The chassis cluster can contain a maximum of two devices: A chassis cluster can only consist of two nodes: node 0 and node 1. The nodes must be the same model, have the same hardware configuration, run the same software version, and have the same license keys. The nodes share a common configuration and act as backup for each other in case of failure.
Reference: = Configuring Chassis Clustering on SRX Series Devices, SRX Series Chassis Cluster Configuration Overview, Connecting SRX Series Firewalls to Create a Chassis Cluster
NEW QUESTION # 69
......
If you want to get JN0-336 certification, you may need to spend a lot of time and energy. With our JN0-336 study materials, you can save a lot of time and effort. We know that you must have a lot of other things to do, and our JN0-336 learning guide will relieve your concerns in some ways. We can claim that if you study with our JN0-336 practice engine for 20 to 30 hours, you will be confident to pass the exam by the first attempt.
JN0-336 PDF Questions: https://www.passtorrent.com/JN0-336-latest-torrent.html
What's more, part of that PassTorrent JN0-336 dumps now are free: https://drive.google.com/open?id=1wZcrkCL6JqAmNYFLreYMZZph7bpIvnra