Our NSE6_EDR_AD-7.0 Test Guide is suitable for you whichever level you are in right now. Whether you are in entry-level position or experienced exam candidates who have tried the exam before, this is the perfect chance to give a shot. Not only from precious experience about thee exam but the newest information within them. Our Fortinet NSE 6 - FortiEDR 7.0 Administrator study question will be valuable investment with reasonable prices. Besides, they can be obtained within 5 minutes if you make up your mind.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: FortiEDR System Architecture and Deployment | 25% | - Installation and deployment process - Multi-tenancy deployment - Inventory management and system tools - Architecture and technical positioning - API-based management operations |
| Topic 2: Events, Forensics, and Threat Hunting | 25% | - Forensic analysis and incident investigation - Threat hunting data interpretation - Threat hunting profiles and queries - Security event and alert analysis |
| Topic 3: Security Settings and Policies | 25% | - Communication control policies - Security policies configuration - Playbooks creation and management - Fortinet Cloud Service (FCS) integration |
| Topic 4: Monitoring and Troubleshooting | 10% | - Performance and issue diagnosis - System monitoring and health checks - Log and alert troubleshooting |
| Topic 5: Integration and Security Fabric | 15% | - Fortinet Security Fabric integration - FortiXDR deployment and configuration |
>> Latest NSE6_EDR_AD-7.0 Exam Fee <<
Getcertkey is a wonderful study platform that can transform your effective diligence in to your best rewards. By years of diligent work, our experts have collected the frequent-tested knowledge into our NSE6_EDR_AD-7.0 exam materials for your reference. So our NSE6_EDR_AD-7.0 Practice Questions are triumph of their endeavor. I can say that no one can know the NSE6_EDR_AD-7.0 study guide better than them and our quality of the NSE6_EDR_AD-7.0 learning quiz is the best.
NEW QUESTION # 10
Refer to the exhibit.
An event exception is shown. Which two statements about the exception are true? (Choose two answers)
Answer: A,B
Explanation:
The correct answers are C and D .
The exhibit shows an exception created/updated by FortinetCloudServices after the file Update.exe was classified as Good . This aligns with the FortiEDR Cloud Service behavior described in the guide. The guide states that once FCS is connected, it can enable Tuning , which means automated security event exception
/allowlisting. After a triggered security event is reclassified as Safe, an automated cross-environment exception can be pushed downstream and the event expires, preventing it from triggering again.
Option C is correct because the Event Exceptions window includes Triggered Rules , and the guide states that when editing an exception, the administrator can modify the Collector Groups , Destinations , Users , and the pairs of rules and processes that define the exception in the Triggered Rules area.
Option D is the Fortinet/FCS-related statement supported by the guide's FCS behavior. The guide says FCS can enable follow-up actions, including Tuning through automated exceptions and Playbook Actions , and that playbook policy remediation actions are based on the final FCS determination.
Option A is wrong because the exhibit explicitly states "All the Raw Data Items are covered." A partial exception would mean not all raw data items are covered. The guide explains that if an exception does not cover all raw data items, FortiEDR displays a different indicator and distinguishes covered from non-covered raw data items.
Option B is wrong because the exception scope in the exhibit is set to All groups , All destinations , and All users . The comment references device C8092231196, but that is not the same as saying the exception applies only to that device.
=========
NEW QUESTION # 11
What specific action does FortiEDR take when the Zero Trust Device Tagging playbook is activated?
(Choose one answer)
Answer: C
Explanation:
The correct answer is C.
The FortiEDR 7.0.0 Administration Guide explains that Identity Management integration can use FortiClient EMS. The connector requires API credentials or FortiCloud credentials depending on whether FortiClient EMS is on-premises or cloud-based. The guide states that for the out-of-the-box action, such as Zero Trust device tagging on FortiClient EMS, FortiEDR tags the device as non-trusted in the identity management system and specifies the classification tag to apply in the Tag name field.
The guide also lists predefined FortiClient EMS 7.2 or later fabric tags used by FortiEDR, including FortiEDR_Malicious, FortiEDR_PUP, FortiEDR_Suspicious, FortiEDR_Likely_Safe, and FortiEDR_Probably_Good. These tags are used by FortiClient EMS to tag the endpoint based on FortiEDR classification.
Finally, the guide states that to configure the automated response, the administrator must go to Security Settings > Playbooks, open the relevant Playbook policy, and place a checkmark in the relevant classification column next to the Zero Trust device tagging row under Remediation. FortiEDR is then configured to automatically tag a device as non-trusted when a security event is triggered.
Options A, B, and D are wrong. FortiEDR does not remove unmanaged endpoints, does not apply a default tag to every endpoint, and does not disable the endpoint merely until a tag is assigned. The action is API- based FortiClient EMS tagging tied to FortiEDR event classification
NEW QUESTION # 12
Refer to the Exhibit:
Based on the incident details shown in the exhibit, which two statements about this incident are true? (Choose two answers)
Answer: A,D
Explanation:
The correct answers are A and C .
The exhibit shows an audit/response action stating that IP address 74.125.235.20 was added to malicious IP addresses on firewall FortiGate . This matches the FortiEDR playbook action Block address on Firewall .
The guide states that this action ensures connections to remote malicious addresses associated with the security event are blocked, and that a firewall connector must already be configured for this action. It also explains that a checkmark in a classification column means communication with the affected destination is automatically blocked when a security event with that classification is triggered.
Option C is the second best answer because FortiEDR events are initially classified by FortiEDR detection logic/Core, and the guide states that classifications are initially determined by the Core but can later be changed automatically by FortiEDR Cloud Service or manually. The exhibit shows "Classification Changed To: Suspicious (By Fortinet)" , but it does not say the event was manually classified by an administrator. So the event classification process is FortiEDR-driven, with later Fortinet/FCS-style automatic classification possible.
Option B is wrong. The exhibit shows one raw-data row with device cwinserv-32 +2 , which indicates more than one affected device/raw item is represented in the aggregation. So it did not occur on only one device.
Option D is wrong because the incident rows clearly show Unhandled . The guide states that security events are initially marked as unread and unhandled, and the unread/unhandled status helps users track whether anyone has read and handled the event.
=========
NEW QUESTION # 13
You added three new applications to FortiEDR using only the Path attribute. What are two expected outcomes of this configuration? (Choose two answers)
Answer: A,C
Explanation:
The correct answers are A and B .
The FortiEDR 7.0.0 Administration Guide states that newly added applications are disabled by default , which means they are not blocked unless enabled. The guide further explains that the default state can be changed by enabling the Enable Default application state option in the Application Control Manager settings. Therefore, option A is correct.
Option B is also correct because Application Control allows an application to be defined by Hash or by any combination of File Name / Path / Signer . The guide says that the Path field specifies the path to the executable file of the application to be blocked. When using path-based matching, the enforcement is tied to the specified path criteria, not to every possible location of the same file.
Option C is wrong because the file name does not also need to match when only the Path attribute is used.
Option D is wrong because blocking all instances regardless of location applies when only the File Name field is used, not when the match is path-specific. The guide explicitly states that if only the File Name field is filled, the application is blocked no matter where the executable appears.
NEW QUESTION # 14
Refer to the Exhibit:
Based on the FortiEDR status output shown in the exhibit, what are two reasons for the degraded state?
(Choose two answers)
Answer: B,C
Explanation:
The correct answers are B and C .
The exhibit shows:
FortiEDR Service: Up
FortiEDR Driver: Up
FortiEDR Status: Degraded (no configuration)
This means the local Collector service and driver are running, but the Collector has not received valid configuration. In FortiEDR, a Collector must register and communicate with the FortiEDR Aggregator to receive its configuration. The guide states that the Collector initially sends registration information to the FortiEDR Aggregator using SSL, sends ongoing health/status/security-event information, and receives its configuration from the Aggregator.
During installation, a non-customized Windows Collector requires the correct Aggregator address , Aggregator port 8081 , and registration password . The guide explicitly states that the Aggregator port should be specified as 8081 , and that the registration password must be entered during installation.
Therefore, an incorrect registration password or incorrect port number can prevent proper registration
/configuration retrieval, resulting in a degraded/no-configuration state.
Option A is not the best answer because Windows Firewall being enabled by itself does not automatically cause this FortiEDR status; only if it blocks required FortiEDR communication would it matter, and the option is too generic. Option D is also not correct as written because the Collector receives configuration from the Aggregator , not directly from the Central Manager. The guide describes Collector-to-Aggregator communication for registration and configuration.
=========
NEW QUESTION # 15
......
The NSE6_EDR_AD-7.0 PDF is the collection of real, valid, and updated Fortinet NSE 6 - FortiEDR 7.0 Administrator (NSE6_EDR_AD-7.0) practice questions. The Fortinet NSE6_EDR_AD-7.0 PDF dumps file works with all smart devices. You can use the NSE6_EDR_AD-7.0 PDF questions on your tablet, smartphone, or laptop and start NSE6_EDR_AD-7.0 Exam Preparation anytime and anywhere. The NSE6_EDR_AD-7.0 dumps PDF provides you with everything that you must need in NSE6_EDR_AD-7.0 exam preparation and enable you to crack the final NSE6_EDR_AD-7.0 exam quickly.
Valid NSE6_EDR_AD-7.0 Test Pattern: https://www.getcertkey.com/NSE6_EDR_AD-7.0_braindumps.html