P.S. Free 2026 Juniper JN0-351 dumps are available on Google Drive shared by Pass4SureQuiz: https://drive.google.com/open?id=1fXccCu-5ZmevHN1-BfH_EegeeEfB7j_N
These days the Pass4SureQuiz is providing you online Juniper JN0-351 exam questions to crack the Juniper JN0-351 certification exam which means you don't need to be physically present anywhere except the chair at your home. You need a laptop and an active internet connection to access the Pass4SureQuiz Juniper JN0-351 Exam Questions and practice exam.
| Certification Vendor: | Juniper Networks |
|---|---|
| Exam Name: | Enterprise Routing and Switching, Specialist (JNCIS-ENT) |
| Exam Number: | JN0-351 |
| Available Languages: | English |
| Exam Format: | Multiple-choice questions |
| Exam Price: | $300 USD |
| Certificate Validity Period: | 3 years |
| Passing Score: | Not specified (Pass/Fail status available immediately) |
| Related Certifications: | JNCIS-ENT |
| Real Exam Qty: | 65 |
| Exam Duration: | 90 minutes |
| Sample Questions: | Juniper JN0-351 Sample Questions |
| Exam Way: | Pearson VUE testing centers (In-person) |
| Pre Condition: | Recommended: JNCIA-Junos certification |
| Official Syllabus URL: | https://www.juniper.net/us/en/training/certification/tracks/enterprise-routing-switching/jncis-ent.html |
The JN0-351 PDF works on smart phones, tablets, and laptops. Windows computers support the JN0-351 desktop practice test software. No software installation is necessary for the web-based Juniper Exam practice exam. All operating systems (Mac, Linus, Android, iOS, Windows) and major browsers support the JN0-351 web-based practice exam.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
NEW QUESTION # 28
Which two statements are correct about using firewall filters on EX Series switches? (Choose two.)
Answer: B,C
Explanation:
* A is correct because you can deploy only stateless firewall filters on an EX Series switch. A stateless firewall filter is a filter that evaluates each packet individually based on the header information, such as source and destination addresses, protocol, and port numbers 1 . A stateless firewall filter does not keep track of the state or context of a packet flow, such as the sequence number, flags, or session information
1 . EX Series switches support only stateless firewall filters, which are also called access control lists (ACLs) or packet filters 2 .
* C is correct because you can apply firewall filters to both Layer 2 and Layer 3 traffic on an EX Series switch. Layer 2 traffic is traffic that is switched within a VLAN or a bridge domain, while Layer 3 traffic is traffic that is routed between VLANs or networks 3 . EX Series switches support three types of firewall filters: port (Layer 2) firewall filters, VLAN firewall filters, and router (Layer 3) firewall filters 4 . You can apply these filters to different interfaces and directions to control the traffic entering or exiting the switch.
NEW QUESTION # 29
You are deploying a trunk port with multiple VLANs.
In this scenario, which statement is true about the native VLAN?
Answer: B
Explanation:
In a trunk port configuration with multiple VLANs, the native VLAN carries untagged traffic. This means frames sent or received on the port without a VLAN tag are automatically assigned to the native VLAN.
Here ' s why the other options are incorrect:
* A. The native VLAN must be the default VLAN on the port. This is not necessarily true. The native VLAN and the default VLAN can be different. The default VLAN is the VLAN assigned to untagged traffic on access ports, while the native VLAN applies to trunk ports.
* B. The native VLAN is automatically configured through DHCP. This is incorrect. The native VLAN needs to be manually configured on the switch port. DHCP is used for assigning IP addresses, not VLAN IDs.
* D. The native VLAN is the highest tagged VLAN ID on the port. This is also incorrect. The native VLAN and tagged VLANs are independent. The native VLAN is not related to the highest or lowest tagged VLAN ID.
Therefore, the only true statement is that the native VLAN is an untagged VLAN ID on the port.
:
Trunk Ports and VLANs: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960x/software/15-
0_2_EX/vlan/configuration_guide/b_vlan_152ex_2960-x_cg/b_vlan_152ex_2960-x_cg_chapter_0100.pdf Configuring Trunk Ports: https://community.cisco.com/t5/networking-knowledge-base/how-to-define-the- vlans-allowed-on-a-trunk-link/ta-p/3131083 Understanding Native VLANs: https://www.practicalnetworking.net/tag/vlans/
NEW QUESTION # 30
Exhibit
Your ISP is announcing a default route to both R1 and R2. You want your network routers to forward all Internet traffic through the R1 device Which BGP attribute would you use?
Answer: A
Explanation:
The BGP attribute that you would use to forward all Internet traffic through the R1 device is the local preference 1 .
The local preference is an attribute that is used within an autonomous system (AS) and exchanged between iBGP routers 1 . It is used to select an exit point from the AS 1 . The path with the highest local preference is preferred 1 . By setting a higher local preference for the routes received from R1, you can make R1 the preferred exit point for all Internet traffic 1 .
NEW QUESTION # 31
You are receiving multiple BGP routes from an upstream neighbor and only want to advertise a single summarized prefix to your internal OSPF neighbors. This route should only be advertised when you are receiving these BGP routes from this neighbor.
In this scenario, which type of route should you create?
Answer: C
Explanation:
Explanation
In this scenario, you should create an 1. Aggregate routes are used for advertising summarized network prefixes1. They help minimize the number of routing tables in an IP network by consolidating selected multiple routes into a single route advertisement1. This approach is in contrast to non-aggregation routing, in which every routing table contains a unique entry for each route1.
Therefore, option A is correct. Options B, C, and D are not correct because:
Static route using the resolve feature: This type of route uses the resolve feature to install a static route in the routing table only if a specific condition is met1. However, it does not provide the capability to summarize multiple routes into a single prefix.
Generate route: This type of route generates a route that is always present in the routing table and can be used to summarize routes. However, it does not have the capability to only advertise the route when specific BGP routes are being received from a neighbor1.
Static route using qualified next hops: This type of route allows for the specification of multiple next-hop addresses for a static route1. However, it does not provide the capability to summarize multiple routes into a single prefix.
NEW QUESTION # 32
Which two statements about redundant trunk groups on EX Series switches are correct? (Choose two.)
Answer: A,C
Explanation:
Redundant trunk groups are designed to provide link redundancy. If the primary link fails, the secondary link will automatically take over to ensure continued connectivity.
In redundant trunk groups, while regular data traffic is sent over the primary link, Layer 2 control traffic (such as STP, LACP, etc.) is allowed on the secondary link to maintain network stability and protocol operations.
https://www.juniper.net/documentation/us/en/software/junos/multicast-l2/topics/topic- map/redundant-trunk-groups.html
NEW QUESTION # 33
......
JN0-351 Test Topics Pdf: https://www.pass4surequiz.com/JN0-351-exam-quiz.html
2026 Latest Pass4SureQuiz JN0-351 PDF Dumps and JN0-351 Exam Engine Free Share: https://drive.google.com/open?id=1fXccCu-5ZmevHN1-BfH_EegeeEfB7j_N