ITDumpsKR는 여러분이 Huawei인증H19-404_V1.0시험 패스와 추후사업에 모두 도움이 되겠습니다.ITDumpsKR제품을 선택함으로 여러분은 시간과 돈을 절약하는 일석이조의 득을 얻을수 있습니다. Huawei인증H19-404_V1.0 인증시험패스는 아주 어렵습니다. 자기에 맞는 현명한 학습자료 선택은 성공의 지름길을 내딛는 첫발입니다. 퍼펙트한 자료만이Huawei인증H19-404_V1.0시험에서 성공할수 있습니다. ITDumpsKR시험문제와 답이야 말로 퍼펙트한 자료이죠. ITDumpsKR Huawei인증H19-404_V1.0인증시험자료는 100% 패스보장을 드립니다
| Section | Weight | Objectives |
|---|---|---|
| Campus Network Technology Design | 25% | - WLAN planning, coverage and roaming design - VLAN, IP addressing and routing design - QoS, security and high availability design |
| Solution Promotion and Project Implementation | 15% | - Deployment guidance and acceptance criteria - Solution value analysis and competitive differentiation |
| Huawei Campus Network Solutions and Products | 20% | - Xinghe Intelligent Campus Solution overview - Switches, WLAN products and AR routers - iMaster NCE-Campus management platform |
| Campus Network Planning and Design Fundamentals | 15% | - Service requirements and demand analysis - Campus network architecture and evolution - Network design principles and methodologies |
| Scenario-based Campus Network Design | 25% | - Large campus and multi-branch interconnection design - Cloud-managed and virtualized campus network design - Small and medium-sized campus network design |
만약 아직도Huawei H19-404_V1.0시험패스를 위하여 고군분투하고 있다면 바로 우리 ITDumpsKR를 선택함으로 여러분의 고민을 날려버릴 수 잇습니다, 우리 ITDumpsKR에서는 최고의 최신의 덤프자료를 제공 합으로 여러분을 도와Huawei H19-404_V1.0인증자격증을 쉽게 취득할 수 있게 해드립니다. 만약Huawei H19-404_V1.0인증시험으로 한층 업그레이드된 자신을 만나고 싶다면 우리ITDumpsKR선택을 후회하지 않을 것입니다, 우리ITDumpsKR과의 만남으로 여러분은 한번에 아주 간편하게Huawei H19-404_V1.0시험을 패스하실 수 있으며,Huawei H19-404_V1.0자격증으로 완벽한 스펙을 쌓으실 수 있습니다,
질문 # 13
Which of the following statements is false about the energy-saving function of the digital map?
정답：C
설명：
Option C is false. The digital-map energy-saving function provides network-wide energy visibility, identifies periods of low wireless demand, and recommends appropriate energy-saving time windows. During an approved energy-saving period, selected wireless APs or radio resources can be placed into an energy-saving state after the system evaluates coverage, traffic, and capacity requirements.
Automatically powering off switches is not the intended function. Campus switches may carry essential wired services, provide uplinks for other network devices, and supply PoE power to APs, cameras, phones, sensors, and access-control systems. Automatically shutting down a complete switch could therefore interrupt many unrelated services and potentially disconnect downstream network segments.
Huawei identifies low-carbon and energy-saving operation as a characteristic of cloud campus networks and combines this objective with AI-based intelligent O & M and proactive optimization. Its intelligent O & M architecture analyzes AP load trends and performs predictive wireless-network optimization, providing the analytical foundation for selecting safe energy-saving periods and resources.
Therefore, A, B, and D describe supported digital-map energy-saving capabilities. Automatic switch power- off is the false statement, making C correct.
질문 # 14
What are the modes of the HSR RedBox?
정답：A,B,C,D
설명：
An industrial RedBox can provide all four listed interconnection modes. In HSR-SAN mode, it connects a singly attached node that does not natively support High-availability Seamless Redundancy to an HSR network. The RedBox duplicates frames entering the HSR domain and removes duplicate frames before delivering traffic to the SAN.
HSR-PRP mode interconnects an HSR ring with a Parallel Redundancy Protocol network while preserving seamless redundancy. PRP-PRP mode couples two PRP network domains, while HSR-HSR mode connects separate HSR rings. Depending on the implementation, the HSR-HSR interconnection function may also be described as a QuadBox function because four HSR-facing ports can be involved.
The essential RedBox responsibilities are frame conversion, duplication, duplicate elimination, sequence- number handling, and prevention of unintended forwarding loops between redundancy domains. HSR and PRP use compatible duplicate-identification principles, enabling controlled interconnection between these network types without introducing a single point of failure. RedBoxes also provide redundant connectivity for devices that have only one ordinary Ethernet interface.
질문 # 15
If multiple Internet links are available, these links cannot be prioritized and can only be load-balanced.
정답：B
설명：
The statement is false because Huawei SD-WAN supports both priority-based link selection and load balancing. Multiple Internet or WAN links do not have to be treated equally. An administrator can define a preferred or primary link and designate another link as secondary or backup according to application requirements, link quality, cost, bandwidth, or operational policy.
For delay- and packet-loss-sensitive services such as voice and video, a higher-quality link can be configured as the primary path and another link as the backup. If the primary link no longer satisfies the configured SLA thresholds, traffic can be dynamically switched to a better path. Huawei's material explicitly describes primary and secondary link selection based on SLA and also presents load-balancing-based steering as a separate option.
Load balancing is useful when an enterprise wants to utilize the bandwidth of multiple links concurrently.
Priority-based active/standby forwarding is preferable when one provider offers better quality or when one circuit should be reserved for critical services. Intelligent traffic steering can additionally consider application priority and current bandwidth utilization. Therefore, multiple links can be prioritized, load-balanced, or used in a policy-controlled combination, making option B correct.
질문 # 16
Which of the following statements are true about selecting network access authentication points?
정답：A,B,D
설명：
Authentication points should generally be placed on access devices close to the terminals. For wireless users, the AP or WLAN access device is the natural admission point because it directly controls the station's wireless association and service access. For wired users, the access switch directly connects the endpoint and can enforce 802.1X, MAC-address authentication, VLAN authorization, ACLs, and security-group policies.
Huawei recommends access devices as authentication points for employees and specifically recommends access switches as authentication points for wired dumb terminals using MAC-address authentication.
Deploying enforcement close to endpoints prevents unauthenticated or unauthorized traffic from traversing deeper into the campus network. It also improves fault isolation, policy granularity, and scalability because admission processing is distributed across access devices.
Option A is incorrect. A centralized authentication point can simplify configuration and policy management, but it does not inherently provide higher performance. It can create concentrated processing pressure, enlarge the Layer 2 scope, and allow unauthenticated traffic to travel farther before being evaluated. Therefore, the recommended principles are represented by B, C, and D.
질문 # 17
A label stack is an ordered set of labels. MPLS supports a maximum of three layers of nested labels.
정답：B
설명：
The statement is false. An MPLS label stack is an ordered sequence of label-stack entries, with the top label processed first and the bottom identified by the Bottom-of-Stack bit. However, the MPLS architecture does not define a universal maximum of three nested labels. An MPLS forwarding operation may replace the top label, remove it, or push one or more additional labels onto the stack.
Practical label depth is constrained by device implementation, forwarding ASIC capabilities, packet size, and the number of network functions being encoded. A conventional MPLS VPN may use two labels: a transport label and a VPN label. More advanced deployments can add labels for traffic engineering, segment routing, entropy, service chaining, or hierarchical transport. This can produce stacks deeper than three entries.
Therefore, "three layers" may describe a limitation of a particular platform, software version, or deployment design, but it is not an MPLS protocol maximum. RFC 3032 defines the stack as a sequence of four-byte entries and explicitly allows one or more entries to be pushed without specifying a three-label ceiling.
질문 # 18
......
우리ITDumpsKR 에서 제공하는 학습가이드에는 IT전문가들이 만들어낸 시험대비 자료들과Huawei H19-404_V1.0인증시험의 완벽한 문제와 답들입니다. 그리고 우리ITDumpsKR에서는 IT업계에서의 높은 신뢰감으로 여러분들한테 100%보장을 드립니다. 우리에 믿음을 드리기 위하여Huawei H19-404_V1.0관련자료의 일부분 문제와 답 등 샘플을 무료로 다운받아 체험해볼수 있게 제공합니다.
H19-404_V1.0완벽한 시험자료: https://www.itdumpskr.com/H19-404_V1.0-exam.html