Nokia SRAN-Radio-Network-Performance-Optimization Desktop & Practice Test Software By Test4Engine

DOWNLOAD the newest Test4Engine SRAN-Radio-Network-Performance-Optimization PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1a3Taab9xR07l4B9ewea1nAh0gQ-NPVsu

Are you still satisfied with your present job? Do you still have the ability to deal with your job well? Do you think whether you have the competitive advantage when you are compared with people working in the same field? If your answer is no,you are a right place now. Because our SRAN-Radio-Network-Performance-Optimization exam torrent will be your good partner and you will have the chance to change your work which you are not satisfied with, and can enhance your ability by our SRAN-Radio-Network-Performance-Optimization Guide questions, you will pass the SRAN-Radio-Network-Performance-Optimization exam and achieve your target. Just free download the demo of our SRAN-Radio-Network-Performance-Optimization exam questions!

Nokia SRAN-Radio-Network-Performance-Optimization Exam Syllabus Topics:

SectionWeightObjectives
Topic 1: SRAN Optimization Tools and Reports10-15%- Report generation and interpretation
- Automated optimization features
- Nokia NetAct and performance tools
- Configuration management for optimization
Topic 2: Radio Network Optimization Techniques25-30%- Handover optimization
- Parameter tuning best practices
- Load balancing techniques
- Coverage optimization methods
- Interference analysis and mitigation
- Capacity optimization strategies
Topic 3: Performance Troubleshooting20-25%- Optimization case studies
- Common performance issues diagnosis
- Network failure identification and resolution
- Troubleshooting tools utilization
- Root cause analysis methodologies
Topic 4: SRAN Architecture and Fundamentals15-20%- SRAN solution components and functions
- SRAN network architecture overview
- Radio access concepts and principles
- Single RAN integration principles
Topic 5: Radio Network Performance Monitoring20-25%- Threshold configuration and alerting
- Performance monitoring tools and dashboards
- Performance data collection and analysis
- Real-time network monitoring techniques
- KPI definition and measurement

>> SRAN-Radio-Network-Performance-Optimization Sample Questions <<

SRAN-Radio-Network-Performance-Optimization Exam Score, SRAN-Radio-Network-Performance-Optimization Exam Prep

Are you organized for this? Do you want to end up a Nokia certified? In case your answer is high great then we guarantee you that you are on the right region. Check in yourself for MN: NCSS NPS - SRAN Radio Network Performance Optimization Certification Exam | GS40-NPS-SRPER-E-S03-2510 (SRAN-Radio-Network-Performance-Optimization) certification examination and download the SRAN-Radio-Network-Performance-Optimization exam questions and begin preparation right now.

Nokia MN: NCSS NPS - SRAN Radio Network Performance Optimization Certification Exam | GS40-NPS-SRPER-E-S03-2510 Sample Questions (Q21-Q26):

NEW QUESTION # 21
During an intra-gNB DU handover , what is the role of the RRC Reconfiguration message sent by the gNB- CU to the UE?

Answer: A

Explanation:
The correct answer is A .
During an intra-gNB DU handover , the UE is moved from one cell/DU resource to another under the same gNB-CU control. The gNB-CU coordinates the handover preparation and sends an RRC Reconfiguration message to the UE.
The role of this message is to provide the UE with the required handover command information, such as:
Target PCell configuration
Radio resource configuration
Mobility control information
Random access configuration, when needed
Measurement or reconfiguration-related information
After receiving the RRC Reconfiguration , the UE performs the handover execution procedure toward the target cell and later responds with RRC Reconfiguration Complete .
Option B is incorrect because admission control and source-cell scheduling suspension are internal network- side procedures, not the UE-facing role of the RRC Reconfiguration message.
Option C is not the best answer because user-plane resource transfer is handled between gNB-CU/gNB-DU functions, while dedicated preamble allocation may be part of the configuration but is not the main purpose of the message.
Option D is incorrect because RLC reestablishment and PDCP recovery are lower-layer/user-plane handling actions, not the primary purpose of the RRC Reconfiguration message.
Therefore, the correct role is:
It instructs the UE to perform handover to the target PCell and provides measurement/configuration information.


NEW QUESTION # 22
In a high-mobility network, the maximum cell size must be restricted to 33 km . Which PRACH format and restricted-set type should be used?

Answer: A

Explanation:
The correct answer is Format 1 / Type B .
For PRACH planning, the selected preamble format must support the required cell radius. Format 0 is too short for a 33 km cell because it is typically suitable only up to around 14.5 km . Format 2 is also not suitable because its practical maximum cell radius is around 29.5 km , which is below the required 33 km . Therefore, a longer PRACH format is needed.
Because the scenario mentions high mobility , an unrestricted PRACH set is not preferred. High-mobility environments require a restricted set to handle Doppler effects and reduce ambiguity in PRACH preamble detection. Between the restricted-set options, Type B is the correct choice for this 33 km high-mobility case.
A matching Nokia-style question source also lists this exact scenario with Format 1 / Type B as option A.


NEW QUESTION # 23
A slice supporting sensors and smart meters would be categorized as:

Answer: C

Explanation:
The correct answer is A .
Sensors and smart meters are typical massive IoT use cases. They usually involve a very large number of devices sending small amounts of data, often with low mobility and low power requirements.
This type of traffic fits mMTC , or massive Machine Type Communications .
Why the other options are not correct:
URLLC is used for very low-latency and highly reliable services, such as industrial automation, remote control, or mission-critical applications.
eMBB is used for high-throughput broadband services, such as video, fixed wireless access, or enhanced mobile internet.
DNN is not a slice category. It means Data Network Name and identifies the data network the UE connects to, similar to APN in LTE.
Therefore, a slice supporting sensors and smart meters is categorized as:
mMTC.


NEW QUESTION # 24
What is the mandatory prerequisite to implement DSS , or Dynamic Spectrum Sharing ?

Answer: D

Explanation:
The correct answer is D .
DSS allows LTE and 5G NR to share the same spectrum dynamically , instead of requiring a separate dedicated NR carrier. Therefore, dedicated NR spectrum is not mandatory. DSS is also not limited to TDD only; it is commonly used in FDD spectrum refarming scenarios as well. Public RAN references describe DSS as a mechanism where LTE and NR coexist in the same frequency band and share spectrum dynamically.
From an SRAN architecture point of view, the mandatory deployment condition is that the radio platform must support LTE and NR coexistence on the same radio resources. That requires RF module sharing or a DSS-capable shared radio configuration.
So the correct prerequisite is:
RF module sharing.


NEW QUESTION # 25
At which mark are all conditions fulfilled for energy saving , so the cell will be switched off? Refer to the image below.

Answer: B

Explanation:
The correct answer is B , which corresponds to mark C in the diagram.
In the diagram, the energy-saving process follows these stages:
Before mark B , the cell is entering the power-saving period, but the required load condition has not yet been satisfied for the required duration.
At mark B , the measured load has gone below the configured threshold, but the cell is not switched off immediately. The system must confirm that the load remains below the required threshold for the configured time.
At mark C , the load has stayed below the required threshold for the required duration, shown as 5 minutes in the diagram. At this point, all conditions are fulfilled, and the cell can be switched off. The diagram also shows the state becoming:
energySavingState = energySaving
Marks D and E are already inside or near the later part of the power-saving period. Mark E is associated with operator suspension/exit behavior, not the initial moment when all switch-off conditions are first fulfilled.


NEW QUESTION # 26
......

You will be able to assess your shortcomings and improve gradually without having anything to lose in the actual MN: NCSS NPS - SRAN Radio Network Performance Optimization Certification Exam | GS40-NPS-SRPER-E-S03-2510 exam. You will sit through mock exams and solve actual Nokia SRAN-Radio-Network-Performance-Optimization dumps. In the end, you will get results that'll improve each time you progress and grasp the concepts of your syllabus. The desktop-based Nokia SRAN-Radio-Network-Performance-Optimization Practice Exam software is only compatible with Windows.

SRAN-Radio-Network-Performance-Optimization Exam Score: https://www.test4engine.com/SRAN-Radio-Network-Performance-Optimization_exam-latest-braindumps.html

P.S. Free 2026 Nokia SRAN-Radio-Network-Performance-Optimization dumps are available on Google Drive shared by Test4Engine: https://drive.google.com/open?id=1a3Taab9xR07l4B9ewea1nAh0gQ-NPVsu