さらに、PassTest EDGE-Expertダンプの一部が現在無料で提供されています：https://drive.google.com/open?id=1aPlJRL5IX3Yd4emiZBAwKq9VtoOQie3D
EDGE-Expert試験のAPPテストエンジンのような多くの受験者は、非常に強力に思えるので。 このバージョンに興味がある場合は、購入できます。 このバージョンでは、EDGE-Expert試験問題集の質問と回答だけでなく、実践と習得が容易な機能も提供します。 携帯電話、iPadなどのブラウザを開くことができる場合にのみ、あらゆる電子製品で使用できます。 常に実際のテストに不安がある場合、またはテストの終了時間を制御できない場合、EDGE EDGE-Expert試験ブレーンダンプのAPPテストエンジンは、時間指定テストを設定し、実際のテストシーンをシミュレートできます。
| Section | Objectives |
|---|---|
| EDGE Software Application | - Project modeling and inputs in EDGE software - Interpreting performance results and compliance |
| Resource Efficiency Metrics | - Water efficiency strategies and benchmarks - Materials efficiency and embodied energy basics - Energy efficiency concepts and savings calculation |
| EDGE Green Building Fundamentals | - Sustainable design principles - Overview of EDGE system and certification framework |
| Certification Process | - Project registration and documentation requirements - Verification and audit process |
専門的に言えば、試験を受けるに関するテクニックを勉強する必要があります。PassTestというサイトは素晴らしいソースサイトで、EDGEのEDGE-Expertの試験材料、研究材料、技術材料や詳しい解答に含まれています。問題集が提供したサイトは近年で急速に増加しています。あなたは試験の準備をするときに見当もつかないかもしれません。PassTestのEDGEのEDGE-Expert試験トレーニング資料は専門家と受験生の皆様に証明された有効なトレーニング資料で、あなたが試験の合格することを助けられます。
質問 # 78
What is a valid use for collected rainwater to qualify for savings under EDGE?
正解：B
解説：
In the EDGE water assessment, rainwater harvesting contributes to savings only when the collected rainwater is used to directly reduce the building's demand for potable or municipal water. The curriculum explains that qualifying water savings must come from substituting potable water in recognized end uses such as toilet flushing, irrigation, and cooling tower make-up water where applicable. When rainwater is used as make-up water for cooling towers, it displaces treated potable water that would otherwise be required for heat rejection systems, and this reduction is captured in the EDGE software water calculations.
By contrast, options such as groundwater recharge or simply redirecting rainwater to drains or nearby water bodies do not reduce the building's potable water consumption. These actions may be beneficial for stormwater management, flood control, or environmental protection, but they do not represent a direct offset of the building's indoor or process water demand in the way EDGE quantifies water savings for certification.
Therefore, the valid use that qualifies for EDGE water savings in this question is using collected rainwater for cooling towers.
質問 # 79
How often should the EDGE Advanced certification be renewed?
正解：D
解説：
According to the CBCI EDGE certification framework, EDGE Advanced certification, like EDGE Certified, does not require periodic renewal once it has been awarded. EDGE is a design and construction stage certification system that verifies compliance with energy, water, and materials efficiency targets at the time of certification. After successful design and site audits confirm that the committed measures have been implemented, the certificate is issued without an expiration date requiring routine renewal.
The system differs from operational performance rating tools that require re-certification based on ongoing performance data. EDGE focuses on the verified as-built performance compared to the baseline case at the time of project completion. Once the project achieves the required minimum 40 percent energy savings for EDGE Advanced, along with the standard 20 percent savings in water and materials, the certification remains valid without mandatory future audits.
Options suggesting renewal every two years or periodic cycles are not aligned with the EDGE framework.
Therefore, renewal is not required for EDGE Advanced certification, making option B the correct answer.
質問 # 80
Which of the following parameters can be found in the EDGE App Results Bar?
正解：D
解説：
The EDGE App Results Bar displays key outputs of the software analysis after a project is modeled. The EDGE User Guide details the contents of the Results Bar: "The EDGE App Results Bar provides a summary of the project's performance, including percentage savings in energy, water, and embodied energy in materials, as well as the incremental cost, payback period, and carbon emissions reduction" (EDGE User Guide, Section 2.4: Interpreting EDGE Results). Option C, incremental cost, is explicitly mentioned as part of the Results Bar, representing the additional cost of implementing green measures. Option A (building type) and Option B (occupant use) are inputs specified by the user during project setup, not outputs in the Results Bar, as noted: "Building type and occupant use are input parameters, not displayed in the Results Bar" (EDGE User Guide, Section 2.2: Project Setup). Option D (climate conditions) is also an input parameter (selected via location), not an output: "Climate conditions are derived from the selected location and are not shown in the Results Bar" (EDGE Methodology Report Version 2.0, Section 3.2: Climate Data Inputs). Thus, incremental cost (Option C) is the correct parameter found in the Results Bar.
Reference: EDGE User Guide Version 2.1, Section 2.4: Interpreting EDGE Results, Section 2.2: Project Setup; EDGE Methodology Report Version 2.0, Section 3.2: Climate Data Inputs.
質問 # 81
In an air conditioned building with air cooled chiller, selecting insulation in the roof will influence
正解：C
解説：
According to the CBCI EDGE curriculum, roof insulation directly affects the building's thermal performance by reducing heat transfer through the roof. In an air-conditioned building, particularly in warm climates, the roof is a major source of heat gain. By improving roof insulation, the cooling load is reduced, which lowers the electricity consumption of the air-cooled chiller system. Therefore, roof insulation clearly influences operational energy performance and contributes to energy savings in the EDGE model.
At the same time, insulation materials are accounted for in the materials category of EDGE, which evaluates embodied carbon in building materials. Adding or upgrading roof insulation changes the quantity and type of materials used in the construction, thereby influencing the embodied energy or embodied carbon calculation within the materials assessment.
Because the system described uses an air-cooled chiller, water consumption is not directly linked to the cooling process, unlike water-cooled systems with cooling towers. Therefore, roof insulation does not affect water use in this scenario.
For these reasons, roof insulation influences both energy and materials embodied energy, making option D the correct answer.
質問 # 82
Increasing the glazing area of an office building will NOT impact which of the following?
正解：D
解説：
Increasing the glazing area in an office building affects various aspects of energy consumption due to changes in heat gain, heat loss, and natural light availability, but it does not influence all buildingsystems. The EDGE User Guide explains the impacts of glazing: "Increasing the glazing area (window-to-wall ratio, WWR) in an office building typically increases cooling demand due to higher solar heat gain, increases heating demand in colder climates due to greater heat loss through windows, and reduces lighting energy by allowing more natural daylight, assuming proper daylighting design" (EDGE User Guide, Section 3.5: Passive Design Strategies). Option A (cooling demand) is affected, as more glazing increases solar heat gain: "Higher WWR leads to greater cooling loads in hot climates due to increased solar radiation entering the building" (EDGE Methodology Report Version 2.0, Section 5.2: Energy Calculation Methods). Option B (heating demand) is also impacted, particularly in cooler climates: "Larger glazing areas increase heat loss in cold climates, raising heating demand due to the lower thermal resistance of windows compared to walls" (EDGE User Guide, Section 4.1: Insulation Measures). Option C (lighting energy) is affected, as more glazing can reduce the need for artificial lighting: "Increased glazing can lower lighting energy by enhancing daylight penetration, provided glare is controlled" (EDGE User Guide, Section 4.4: Lighting Efficiency Measures). However, Option D (hot water demand) is not impacted by glazing area, as hot water use is tied to occupant activities (e.
g., showers, cleaning) rather than building envelope design: "Hot water demand in EDGE is determined by occupant use patterns, such as the number of showers or laundry cycles, and is not influenced by glazing area or WWR" (EDGE Methodology Report Version 2.0, Section 4.2: Water Savings Calculations). The EDGE User Guide further confirms: "Glazing area impacts energy-related metrics like cooling, heating, and lighting, but has no direct effect on hot water demand, which is calculated separately based on usage assumptions" (EDGE User Guide, Section 5.2: Water Efficiency Measures). Therefore, increasing glazing area does not impact hot water demand (Option D).
Reference:EDGE User Guide Version 2.1, Section 3.5: Passive Design Strategies, Section 4.1: Insulation Measures, Section 4.4: Lighting Efficiency Measures, Section 5.2: Water Efficiency Measures; EDGE Methodology Report Version 2.0, Section 5.2: Energy Calculation Methods, Section 4.2: Water Savings Calculations.
質問 # 83
......
より多くの時間を節約できるように、お支払い後10分以内にEDGE-Expertテストガイドをオンラインでお送りします。時間の無駄を避けるため、できるだけ早くこれらのEDGE-Expertトレーニング資料を学習できることを保証いたします。私たちEDGEは、時間は世界で最も貴重なものだと信じています。これが、Excellence in Design for Greater Efficiencies (EDGE Expert) Exam学習効率と生産性の向上に専念する理由です。 EDGE-Expert調査の質問の利点をいくつかご紹介します。EDGE-Expertの質問をご覧ください。
EDGE-Expert難易度: https://www.passtest.jp/EDGE/EDGE-Expert-shiken.html
ちなみに、PassTest EDGE-Expertの一部をクラウドストレージからダウンロードできます：https://drive.google.com/open?id=1aPlJRL5IX3Yd4emiZBAwKq9VtoOQie3D