Hot 350-101 Spot Questions - 350-101 Exam Questions Fee

P.S. Free & New 350-101 dumps are available on Google Drive shared by Dumpcollection: https://drive.google.com/open?id=1VsCvjNpNxxshH-T2Ss44KEV8du3sR6Wq

Comparing to other training institution, our valid 350-101 vce dumps are affordable, latest and cost-effective, which can overcome the difficulty of valid 350-101 Actual Test and ensure you pass the exam. It can not only save your time and money, but also help you clear Cisco practice exam with high rate.

Cisco 350-101 Exam Syllabus Topics:

SectionWeightObjectives
Wireless Monitoring and Management25%- Monitoring and troubleshooting
  • 1. Troubleshooting methodologies
  • 2. Telemetry and analytics
  • 3. Cisco Catalyst Center
  • 4. Packet analysis
Automation and AI10%- Automation technologies
  • 1. APIs and programmability
  • 2. AI-assisted wireless operations
  • 3. Automation workflows
RF Fundamentals15%- RF characteristics
  • 1. Signal propagation
  • 2. Antenna concepts
  • 3. Frequency bands and channels
  • 4. RF interference
Wireless Client Connectivity30%- Client access and security
  • 1. High availability
  • 2. WLAN configuration
  • 3. Mobility services
  • 4. Guest access
  • 5. Authentication and authorization
802.11 Technology Fundamentals20%- Wireless standards and operations
  • 1. QoS and roaming
  • 2. Wi-Fi 6 and Wi-Fi 7 concepts
  • 3. 802.11 PHY and MAC operations
  • 4. Channel utilization

>> Hot 350-101 Spot Questions <<

Cisco 350-101 Exam Questions Fee - Exam 350-101 Voucher

In order to cater to meet different needs of candidates, three versions of 350-101 learning materials are available. 350-101 PDF version is printable, and if you prefer the hard one, you can choose this version for your practice. 350-101 Soft test engine can install in more than 200 personal computers, and it can also stimulate the real examenvironment, and you can know what the real exam is like. 350-101 Online Test engine is convenient and easy to learn, you can learn anytime and anyplace. This version can record your process of training, and you can have a general review before next training.

Cisco Implementing and Operating Cisco Wireless Core Technologies Sample Questions (Q99-Q104):

NEW QUESTION # 99
Refer to the exhibit. A network administrator must configure a client management parameter for a wireless deployment in a multi-site enterprise. The enterprise is using Cisco ISE as the management platform to oversee wireless access policies. To meet the organization's compliance requirements, all wireless endpoints must be evaluated against a posture policy before gaining access. Which configuration change must be applied on the WLAN level of the WLC to meet the requirement?

Answer: C

Explanation:
To enforce endpoint compliance using Cisco ISE, the WLC must allow AAA policies configured on the ISE to override the WLAN default access policies. Enabling aaa-override on the WLAN allows the WLC to apply RADIUS-supplied attributes from Cisco ISE, including user roles, VLAN assignment, and posture evaluation outcomes, to connected clients. This is essential for enterprise environments where a posture policy (e.g., checking device security posture, anti-virus status, OS updates) must be applied prior to granting full network access.


NEW QUESTION # 100
How does the optimized roaming function operate in a WLC implementation?

Answer: A

Explanation:
Optimized roaming is a Cisco WLC feature designed to reduce sticky-client behavior. A sticky client remains associated to an AP even after moving far enough away that another AP would provide better RF service.
Cisco describes optimized roaming as actively monitoring client data RSSI and disconnecting clients when received signal strength falls below the configured threshold. The official Catalyst 9800 documentation states that optimized roaming "disassociates client when the RSSI is lower than the set threshold," which directly matches option A.
This function does not calculate device location through peer-to-peer beaconing, does not depend on external experience services, and is not static load balancing. It is an RF/client-roaming enforcement mechanism controlled by the wireless infrastructure. In practical operation, the AP/WLC evaluates client signal quality and, when the configured optimized roaming criteria are met, forces the client to disconnect so it can reassess the RF environment and roam to a better AP. Cisco also notes that optimized roaming helps maintain client connectivity by managing disassociationn based on RSSI and data-rate thresholds. Reference topics:Client Connectivity Configuration - client roaming behavior, sticky-client mitigation, RSSI thresholds, and WLC roaming optimization


NEW QUESTION # 101
Refer to the exhibit. A wireless controller is deployed at a branch location to facilitate guest client connectivity. A network engineer configures one WLAN using Web authentication and activates web-based method to align with company security policies. Which configuration enables client authentication for this WLAN?

Answer: A

Explanation:
The command that enables web-based client authentication on the WLAN is security web-auth.
Cisco's Catalyst 9800 Web-Based Authentication guide shows the WLAN configuration workflow:
enter WLAN configuration mode, disable WPA security for the open Layer 2 guest WLAN, then
"Enable web authentication for WLAN" using security web-auth. Cisco then applies the authentication list and parameter map with security web-auth authentication-list ... and security web-auth parameter-map ..., which refine the WebAuth method and portal behavior after WebAuth itself is enabled.
Cisco's LDAP authentication example mirrors the exhibit exactly: wlan webauth 2 webauth, removal of WPA/802.1X Layer 2 security, security web-auth, security web-auth authentication-list ldapauth, and security web-auth parameter-map global. Option B only creates or enters the WLAN profile with WLAN ID 2 and SSID name. Options C and D disable WPA2 and 802.1X AKM; they do not authenticate clients.


NEW QUESTION # 102
How does U-NII-1 operate with regards to the common frequency bands supported in enterprise wireless networks?

Answer: D

Explanation:
U-NII-1 (Unlicensed National Information Infrastructure-1) is a segment of the 5 GHz band commonly used in enterprise wireless deployments. It is specifically designated for indoor use to help minimize interference with other devices and reduce regulatory conflicts. U-NII-1 operates in the lower 5 GHz range (5.150-5.250 GHz in the U.S.) and imposes power and indoor restrictions, which prevents outdoor deployment that could interfere with radar and other critical communications. This band supports 802.11a/n/ac/ax Wi-Fi clients, providing multiple non-overlapping channels that facilitate high-density enterprise deployments. By restricting usage to indoor environments, U-NII-1 helps maintain predictable coverage and mitigates interference from outdoor sources, making it ideal for office and campus environments where controlled radio propagation is critical. The access points and wireless controllers dynamically handle channel assignment and power levels to ensure efficient spectrum usage while conforming to these regulatory limitations. Option C accurately reflects these operational parameters by highlighting indoor restriction and interference minimization, whereas the other options mischaracterize the frequency range, power, or permitted use.
Reference topics:802.11 Technology Fundamentals - U-NII-1 band, indoor use restriction, interference mitigation, enterprise 5 GHz Wi-Fi deployment.


NEW QUESTION # 103
What is the main benefit of using AI Enhanced RRM on the Cisco Catalyst 9800 wireless controller?

Answer: A

Explanation:
AI Enhanced RRM is not a static-threshold tuning feature and it is not designed to simply raise AP transmit power. Cisco defines AI Enhanced RRM as a radio resource management technology that applies artificial intelligence and machine learning to optimize RF environments, uses distributed data collection from Cisco wireless controllers with cloud-based analytics, and automates adaptive RF parameter tuning for Cisco wireless networks.
The operational model is telemetry-driven. RF telemetry is collected from APs by the Catalyst
9800 WLC, sent through Cisco Catalyst Center to the Cisco AI Analytics Cloud, analyzed by RRM algorithms, and then configuration-change information is returned through Catalyst Center toward the managed wireless infrastructure. Cisco's AI-Enhanced RRM deployment guide further identifies DCA, TPC, FRA, and DBS as examples of optimizations performed, meaning the feature enhances dynamic RF control rather than disabling it.
Therefore, option D is the only correct answer. Options A, B, and C describe either legacy/static behavior, harmful power-only logic, or a fixed RF design model that contradicts Cisco AI Enhanced RRM.


NEW QUESTION # 104
......

For more than ten years, our 350-101 practice engine is the best seller in the market. More importantly, our good 350-101 guide questions and perfect after sale service are approbated by our local and international customers. If you want to pass your practice exam, we believe that our 350-101 Learning Engine will be your indispensable choices. More and more people have bought our 350-101 guide questions in the past years. What are you waiting for? Just rush to buy our 350-101 exam braindumps and become successful!

350-101 Exam Questions Fee: https://www.dumpcollection.com/350-101_braindumps.html

P.S. Free & New 350-101 dumps are available on Google Drive shared by Dumpcollection: https://drive.google.com/open?id=1VsCvjNpNxxshH-T2Ss44KEV8du3sR6Wq