참고: Pass4Test에서 Google Drive로 공유하는 무료 2026 Fortinet NSE5_FNC_AD_7.6 시험 문제집이 있습니다: https://drive.google.com/open?id=1BoXkMH-0yvBEONsTpeGifLaQe614L-PM
Pass4Test에서 제공해드리는 IT인증시험대비 덤프를 사용해보신적이 있으신지요? 만약에 다른 과목을 사용해보신 분이라면 Fortinet NSE5_FNC_AD_7.6덤프도 바로 구매할것입니다. 첫번째 구매에서 패스하셨다면 덤프에 신뢰가 있을것이고 불합격받으셨다하더라도 바로 환불해드리는 약속을 지켜드렸기때문입니다. 처음으로 저희 사이트에 오신 분이라면Fortinet NSE5_FNC_AD_7.6덤프로 첫구매에 도전해보지 않으실래요? 저희 덤프로 쉬운 자격증 취득이 가능할것입니다.
| Certification Vendor: | Fortinet |
|---|---|
| Exam Name: | Fortinet NSE 5 - FortiNAC-F 7.6 Administrator |
| Exam Number: | NSE5_FNC_AD_7.6 |
| Passing Score: | 70% |
| Exam Format: | Multiple-choice |
| Real Exam Qty: | 30-35 |
| Available Languages: | English |
| Certificate Validity Period: | 4 years |
| Related Certifications: | Fortinet NSE 5 - Network Security Analyst |
| Exam Price: | USD 200 |
| Exam Duration: | 60 minutes |
| Sample Questions: | Fortinet NSE5_FNC_AD_7.6 Sample Questions |
| Exam Way: | Online proctored or at a Pearson VUE testing center. |
| Pre Condition: | Recommended training: FortiNAC-F 7.6 course or equivalent hands-on experience with FortiNAC-F. |
| Official Syllabus URL: | https://training.fortinet.com/local/staticpage/view.php?page=nse-certification |
>> Fortinet NSE5_FNC_AD_7.6인기자격증 시험 덤프자료 <<
IT업계 취업 준비생이라면 국제적으로도 승인받는 IT인증자격증 정도는 몇개 취득해야 하지 않을가 싶습니다. Fortinet인증 NSE5_FNC_AD_7.6시험을 통과하여 인기 자격증을 취득하시면 취업경쟁율이 제고되어 취업이 쉬워집니다. Pass4Test의Fortinet인증 NSE5_FNC_AD_7.6덤프는 많은 시험본 분들에 의해 검증된 최신 최고의 덤프공부자료입니다.망설이지 마시고Pass4Test제품으로 한번 가보세요.
| 주제 | 소개 |
|---|---|
| 주제 1 |
|
| 주제 2 |
|
| 주제 3 |
|
| 주제 4 |
|
질문 # 51
Refer to the output below.
Examine the communication between a primary FortiNAC-F (192.168.10.10) and a secondary FortlNAC-F (192.168.10.110) configured as a 1+1 HA pair. What is the current state of the FortiNAC-F HA pair?
정답：A
설명：
The correct answer is D . The log output shows the local IP address as 192.168.10.10 , which the question identifies as the primary FortiNAC-F server. In the same output, FortiNAC-F reports inControl true and controlServer true , which means the local primary server is currently the control server. The line showing communication to 192.168.10.110 returns Running - Not In Control , confirming that the secondary server is alive but is not the active controlling node.
This matches FortiNAC-F 1+1 HA behavior. The study guide describes a 1+1 HA pair as an active-passive deployment where one FortiNAC-F device is designated primary and the other secondary. Database and configuration synchronization keep the devices aligned, but only one server is in control at a time. If the primary fails, the secondary assumes control automatically; otherwise, the primary remains the active control server.
Option A is wrong because the secondary explicitly reports Not In Control . Option B is wrong because the output does not show database replication failure. Option C is wrong because failover is not in progress; the output shows a stable state where the primary is in control and the secondary is running as the passive node.
질문 # 52
Refer to the exhibit.
What will happen to the host of a guest user created from this template if the time of connection is 8:00 PM?
정답：C
설명：
In FortiNAC-F, theGuest & Contractor Templateis a configuration object that defines the parameters for accounts created by sponsors or through self-registration. One of the critical security controls within this template is theLogin Availabilitysetting. This setting restricts the specific days and times during which a guest or contractor is permitted to authenticate and access the network.
As shown in the exhibit, the " StandardGuest " template hasLogin Availabilityset to " Specify Time " , with a schedule defined asMon-Fri, 6:00 AM to 7:00 PM. If a guest user attempts to connect or authenticate at8:00 PM, which is outside of the permitted window, FortiNAC-F ' s policy engine will automatically deny the authentication request. When an authentication attempt is denied due to schedule restrictions, the system does not move the host into the " Authenticated " or " Registered " state required for production access. Instead, the host ismarked as non-authenticatedin the adapter or host view.
This behavior ensures that even if a guest possesses valid credentials, their access is strictly bound by the organizational policy for visitor hours. The host will typically remain in its current isolation or registration VLAN, and the user will see a message on the captive portal indicating that their account is not currently authorized for login. It is important to distinguish this from " at-risk " (C), which relates to security scan failures, or " rogue " (B), which typically refers to unknown devices that have not yet been associated with a valid account or profiling rule.
" Login Availabilitydefines the timeframe during which the guest or contractor account is valid for network access. This schedule is enforced at the time of authentication. If a user attempts to log in outside of the designated window, the authentication is rejected by the system. Consequently, the host record will reflect anon-authenticatedstatus, and the device will remain restricted to the isolation or registration network until a valid login window is reached. " -FortiNAC-F Administration Guide: Guest and Contractor Templates Section.
질문 # 53
During the testing of a newly modeled infrastructure switch, the administrator is not seeing hosts as they connect or move from one port to another. What would cause this issue?
정답：D
설명：
The correct answer is A . When FortiNAC-F needs near real-time Layer 2 visibility, it relies on link traps, MAC notification traps, RADIUS, or scheduled/manual Layer 2 polling. The study guide explains that MAC notification traps contain the MAC address learned or removed from the switch MAC address table and the associated port, allowing FortiNAC-F to update its database when hosts connect, disconnect, or move. It also states that MAC notification traps are the preferred method for learning and updating Layer 2 information.
If a newly modeled switch does not show hosts as they connect or move between ports, the likely problem is that MAC notification traps are not correctly configured or not reaching FortiNAC-F . Layer 3 polling failure would affect IP-to-MAC correlation, not the ability to learn which switch port a MAC address is connected to. Disabled scheduled polling could delay updates, but it would not be the best explanation when the expected behavior is immediate host detection during connection or movement testing. Contact polling only checks whether the device is reachable; it does not collect host MAC-to-port visibility.
질문 # 54
While discovering network infrastructure devices, a switch appears in the inventory topology with a question mark (?) on the icon. What would cause this?
정답：A
설명：
In FortiNAC-F, the Inventory topology uses specific icons to represent the status and model of discovered network infrastructure. When a switch or other network device is discovered via SNMP, FortiNAC-F retrieves its System ObjectID (sysObjectID) to identify the specific make and model. This OID is then compared against the internal database of supported device mappings.
A question mark (?) icon appearing on a discovered switch indicates that while the discovery process successfully communicated with the device (meaning SNMP credentials were correct), the SNMP ObjectID is not recognized or mapped in the current version of FortiNAC-F. This essentially means the device is "unsupported" by the current software out-of-the-box. Because the OID is unknown, FortiNAC-F does not know which CLI or SNMP command set to use for critical functions like L2 polling (host visibility) or VLAN switching (enforcement). To resolve this, an administrator can manually "Set Device Mapping" to a similar existing model or a "Generic SNMP Device" if only basic L3 visibility is required.
"Discovered devices displaying a '?' icon indicate the currently running version does not have a mapping for that device's System OID (device is not supported). Device mappings are used to manage the device by performing functions such as L2/L3 Polling, Reading, and Switching VLANs." - Fortinet Technical Tip: Options for devices unable to be modeled in Inventory.
질문 # 55
Refer to the exhibit.
An administrator is configuring FortiNAC-F (or the onboarding of guest users. Which IP address would be used for the gateway defined in the DHCP scope?
정답：C
설명：
The correct answer is D . The question is about guest onboarding , and the exhibit shows the Guest Network using gateway 10.20.1.250 . In a Layer 3 captive network design, FortiNAC-F provides DHCP and DNS services to isolated or captive-network hosts, but the DHCP scope must still give the endpoint the correct default gateway for the network where that endpoint is placed. The study guide specifically warns that, when configuring Layer 3 captive network scopes, the administrator must think from the isolated host's perspective for the IP pool and gateway configuration . It also states that each captive network interface configuration includes an IP address, subnet mask, default gateway, and one or more DHCP scopes.
Option A , 10.0.1.254 , is the infrastructure gateway on the FortiNAC-F service/production-side segment, not the guest network gateway. Option B , 10.0.1.110 , is the FortiNAC-F interface address shown in the diagram, not the default gateway for guest clients. Option C , 10.10.1.250 , is the gateway for the Isolation Network , not the Guest Network . Since the administrator is configuring guest onboarding, the DHCP scope for guest users must hand out 10.20.1.250 as the gateway.
질문 # 56
......
NSE5_FNC_AD_7.6시험덤프데모: https://www.pass4test.net/NSE5_FNC_AD_7.6.html
참고: Pass4Test에서 Google Drive로 공유하는 무료 2026 Fortinet NSE5_FNC_AD_7.6 시험 문제집이 있습니다: https://drive.google.com/open?id=1BoXkMH-0yvBEONsTpeGifLaQe614L-PM