많은 사이트에서도 무료Fortinet NSE6_EDR_AD-7.0덤프데모를 제공합니다. 우리도 마찬가지입니다. 여러분은 그러한Fortinet NSE6_EDR_AD-7.0데모들을 보시고 다시 우리의 덤프와 비교하시면, 우리의 덤프는 다른 사이트덤프와 차원이 다른 덤프임을 아사될 것 입니다. 우리 Fast2test사이트에서 제공되는Fortinet인증NSE6_EDR_AD-7.0시험덤프의 일부분인 데모 즉 문제와 답을 다운받으셔서 체험해보면 우리Fast2test에 믿음이 갈 것입니다. 왜냐면 우리 Fast2test에는 베터랑의 전문가들로 이루어진 연구팀이 잇습니다, 그들은 it지식과 풍부한 경험으로 여러 가지 여러분이Fortinet인증NSE6_EDR_AD-7.0시험을 패스할 수 있을 자료 등을 만들었습니다 여러분이Fortinet인증NSE6_EDR_AD-7.0시험에 많은 도움이Fortinet NSE6_EDR_AD-7.0될 것입니다. Fast2test 가 제공하는NSE6_EDR_AD-7.0테스트버전과 문제집은 모두Fortinet NSE6_EDR_AD-7.0인증시험에 대하여 충분한 연구 끝에 만든 것이기에 무조건 한번에Fortinet NSE6_EDR_AD-7.0시험을 패스하실 수 있습니다. 때문에Fortinet NSE6_EDR_AD-7.0덤프의 인기는 당연히 짱 입니다.
| Section | Weight | Objectives |
|---|---|---|
| Security Settings and Policies | 25% | - Communication control policies - Security policies configuration - Playbooks creation and management - Fortinet Cloud Service (FCS) integration |
| FortiEDR System Architecture and Deployment | 25% | - Architecture and technical positioning - Multi-tenancy deployment - API-based management operations - Inventory management and system tools - Installation and deployment process |
| Integration and Security Fabric | 15% | - Fortinet Security Fabric integration - FortiXDR deployment and configuration |
| Monitoring and Troubleshooting | 10% | - Log and alert troubleshooting - Performance and issue diagnosis - System monitoring and health checks |
| Events, Forensics, and Threat Hunting | 25% | - Forensic analysis and incident investigation - Threat hunting data interpretation - Security event and alert analysis - Threat hunting profiles and queries |
>> NSE6_EDR_AD-7.0높은 통과율 시험덤프공부 <<
Fortinet NSE6_EDR_AD-7.0인증시험패스 하는 동시에 여러분의 인생에는 획기적인 일 발생한것이죠, 사업에서의 상승세는 당연한것입니다. IT업계종사자라면 누구나 이런 자격증을 취득하고싶어하리라고 믿습니다. 많은 분들이 이렇게 좋은 인증시험은 아주 어렵다고 생각합니다. 네 많습니다. 패스할확율은 아주 낮습니다. 노력하지않고야 당연히 불가능하죠.Fortinet NSE6_EDR_AD-7.0시험은 기초지식 그리고 능숙한 전업지식이 필요요 합니다. 우리Fast2test는 여러분들한테Fortinet NSE6_EDR_AD-7.0시험을 쉽게 빨리 패스할 수 있도록 도와주는 사이트입니다. 우리Fast2test의Fortinet NSE6_EDR_AD-7.0시험관련자료로 여러분은 짧은시간내에 간단하게 시험을 패스할수 있습니다. 시간도 절약하고 돈도 적게 들이는 이런 제안은 여러분들한테 딱 좋은 해결책이라고 봅니다.
질문 # 16
A playbook is configured with two actions: terminate process and isolate device. The terminate process action fails because the process is protected by Windows. What is the expected behavior for the second action, isolate device? (Choose one answer)
정답：D
설명：
The correct answer is D .
The FortiEDR guide confirms that Playbook actions are automatic incident response actions configured under Security Settings > Playbooks and applied based on security event classification. It also confirms that actions such as Terminate Process and device isolation actions can be configured as playbook responses. For scheduled-query-triggered events, the guide states that FortiEDR can automatically apply the Playbook action assigned to the Collector Group that the triggering device belongs to.
For isolation, the guide shows that isolation actions such as Isolate device with NAC are configured under the Investigation section of Playbooks, and similar isolation actions are triggered automatically when selected for the relevant classification.
The uploaded guide does not provide a specific line saying "if terminate process fails, continue to the next action." Based on FortiEDR playbook behavior, configured actions are executed independently. A failure to terminate a protected Windows process does not automatically cancel the remaining playbook actions.
Therefore, the next configured action, isolate device , is still executed.
Options A , B , and C are wrong because the playbook does not pause for administrator intervention, does not stop merely because an email is generated, and does not cancel all remaining configured actions because one action failed.
=========
질문 # 17
You are asked to configure a query to run every 15 minutes, automatically searching for specific registry modifications across all endpoints. Which FortiEDR feature must you configure? (Choose one answer)
정답：D
설명：
The correct answer is C.
The FortiEDR guide explains that Threat Hunting searches across endpoint activity events, including registry activity. It states that Threat Hunting can search based on attributes of files, registry keys and values, network, processes, event log, and activity event types. This fits the requirement to search for specific registry modifications across endpoints.
The guide also explains that after filtering activity events, the query can be saved and defined as a Scheduled Query. It says: "Scheduled Query: Mark this option to automate the process of detecting threats so that this query is run automatically according to the schedule that you define." It also states that a security event is automatically created in the Incidents tab when matches are detected, and notifications can be sent through email, Syslog, and other configured methods.
The guide further states that the Repeat Every/On options define the frequency and schedule when the query runs. Therefore, a 15-minute recurring query is handled through the Scheduled Query capability in Threat Hunting, not Communication Control, policy override, or a manual Playbook trigger.
Strictly speaking, the guide calls this a scheduled query under Threat Hunting saved queries, not a
"communication control rule" or "manual query." Option C is the intended answer.
=========
질문 # 18
Refer to the exhibits.
What happens when the net user command runs on an endpoint? (Choose one answer)
정답：A
설명：
The correct answer is C .
The exhibit shows a Threat Hunting saved query named CLI Command with the query:
Target.Process.Filename ( " net.exe " )
It is configured as a Scheduled Query , classified as Suspicious , and set to repeat every 15 minutes . The FortiEDR guide states that saving a Threat Hunting query allows it to be defined as a scheduled query to automate threat detection. When the scheduled query runs and detects matching activity, a security event is automatically created in the Incidents tab .
The guide also states that scheduled queries run automatically according to the configured schedule, and each time a match is detected, FortiEDR generates a security event in the Incidents tab and sends notifications according to the security event configuration.
So, when the endpoint runs:
net user edruser password! /ADD
FortiEDR records the relevant process activity, and when the scheduled query runs, it matches the target process net.exe and creates an incident/security event. It is not immediate by default because the query is scheduled every 15 minutes. It also does not block CLI commands by default unless playbook actions or policy controls are configured. The activity is treated according to the saved query classification, which in the exhibit is Suspicious .
=========
질문 # 19
You added three new applications to FortiEDR using only the Path attribute. What are two expected outcomes of this configuration? (Choose two answers)
정답：B,C
설명：
The correct answers are A and B .
The FortiEDR 7.0.0 Administration Guide states that newly added applications are disabled by default , which means they are not blocked unless enabled. The guide further explains that the default state can be changed by enabling the Enable Default application state option in the Application Control Manager settings. Therefore, option A is correct.
Option B is also correct because Application Control allows an application to be defined by Hash or by any combination of File Name / Path / Signer . The guide says that the Path field specifies the path to the executable file of the application to be blocked. When using path-based matching, the enforcement is tied to the specified path criteria, not to every possible location of the same file.
Option C is wrong because the file name does not also need to match when only the Path attribute is used.
Option D is wrong because blocking all instances regardless of location applies when only the File Name field is used, not when the match is path-specific. The guide explicitly states that if only the File Name field is filled, the application is blocked no matter where the executable appears.
질문 # 20
What specific action does FortiEDR take when the Zero Trust Device Tagging playbook is activated?
(Choose one answer)
정답：D
설명：
The correct answer is C.
The FortiEDR 7.0.0 Administration Guide explains that Identity Management integration can use FortiClient EMS. The connector requires API credentials or FortiCloud credentials depending on whether FortiClient EMS is on-premises or cloud-based. The guide states that for the out-of-the-box action, such as Zero Trust device tagging on FortiClient EMS, FortiEDR tags the device as non-trusted in the identity management system and specifies the classification tag to apply in the Tag name field.
The guide also lists predefined FortiClient EMS 7.2 or later fabric tags used by FortiEDR, including FortiEDR_Malicious, FortiEDR_PUP, FortiEDR_Suspicious, FortiEDR_Likely_Safe, and FortiEDR_Probably_Good. These tags are used by FortiClient EMS to tag the endpoint based on FortiEDR classification.
Finally, the guide states that to configure the automated response, the administrator must go to Security Settings > Playbooks, open the relevant Playbook policy, and place a checkmark in the relevant classification column next to the Zero Trust device tagging row under Remediation. FortiEDR is then configured to automatically tag a device as non-trusted when a security event is triggered.
Options A, B, and D are wrong. FortiEDR does not remove unmanaged endpoints, does not apply a default tag to every endpoint, and does not disable the endpoint merely until a tag is assigned. The action is API- based FortiClient EMS tagging tied to FortiEDR event classification
질문 # 21
......
Fast2test덤프공부가이드는 업계에서 높은 인지도를 자랑하고 있습니다. Fast2test제품은 업데이트가 가장 빠르고 적중율이 가장 높아 업계의 다른 IT공부자료 사이트보다 출중합니다. Fast2test의Fortinet인증 NSE6_EDR_AD-7.0덤프는 이해하기 쉽고 모든Fortinet인증 NSE6_EDR_AD-7.0시험유형이 모두 포함되어 있어 덤프만 잘 이해하고 공부하시면 시험패스는 문제없습니다.
NSE6_EDR_AD-7.0완벽한 덤프자료: https://kr.fast2test.com/NSE6_EDR_AD-7.0-premium-file.html