What's more, part of that Prep4King JN0-364 dumps now are free: https://drive.google.com/open?id=1NO_lUTiQNNEUQAlzcZDfoocNrct6GorW
Because the registration fee is expensive, you have to win your Service Provider Routing and Switching, Specialist (JNCIS-SP) to make all the spending worth it. Failing on your Juniper JN0-364 exam will not only cause you to lose money but also time and energy. On the other hand, winning a Service Provider Routing and Switching, Specialist (JNCIS-SP) will open up so many doors that can bring you much forward on your career path.Of all the preparation resources for the Service Provider Routing and Switching, Specialist (JNCIS-SP) JN0-364 Exam available in the market, this Juniper JN0-364 braindumps are one of the most reliable materials. The development of these JN0-364 question dumps involves feedback from hundreds of Juniper professionals around the world. They also revise the Juniper JN0-364 exam questions regularly to keep them relevant to the latest Service Provider Routing and Switching, Specialist (JNCIS-SP) exam.
| Section | Objectives |
|---|---|
| Topic 1: Layer 2 Bridging or VLANs | - Demonstrate knowledge of how to configure, monitor, or troubleshoot Layer 2 bridging or VLANs
|
| Topic 2: IPv6 | - Demonstrate knowledge of how to configure, monitor, or troubleshoot IPv6 - Identify the concepts, operation, or functionality of IPv6
|
| Topic 3: Intermediate System to Intermediate System (IS-IS) | - Identify the concepts, operation, or functionality of IS-IS
|
| Topic 4: Multiprotocol Label Switching (MPLS) | - Demonstrate knowledge of how to configure, monitor, or troubleshoot MPLS
|
| Topic 5: Open Shortest Path First (OSPF) | - Identify the concepts, operation, or functionality of OSPF
|
| Topic 6: Border Gateway Protocol (BGP) | - Identify the concepts, operation, or functionality of BGP
|
| Topic 7: Protocol-Independent Routing | - Identify the concepts, operation, or functionality of various protocol-independent routing components
|
| Topic 8: Spanning Tree Protocols | - Identify the concepts, operation, or functionality of STP
|
What is the measure of competence? Of course, most companies will judge your level according to the number of qualifications you have obtained. It may not be comprehensive, but passing the qualifying exam is a pretty straightforward way to hire an employer. Our JN0-364 exam practice questions on the market this recruitment phenomenon, tailored for the user the fast pass the JN0-364 examination method of study. The quality of our JN0-364 learning guide is absolutely superior, which can be reflected from the annual high pass rate of our JN0-364 exam questions.
NEW QUESTION # 176
Referring to the exhibit. You confirm that the R2 and R3 routers are receiving a BGP route to the
203.0.113.0/24 network, but both routers display the route as hidden. Referring to the exhibit, which two actions solve this problem? (Choose two.)
Answer: B,C
Explanation:
A route being hidden in BGP usually indicates a configuration that prevents it from being used, such as a next-hop that is not reachable.
B). Configuring a routing policy on R1 that sets the next-hop to the address used for IBGP peering ensures reachability of the next-hop within the local AS. D. Applying the correct routing policy as an export policy to the IBGP group on R1 will share the route with the IBGP peers, in this case, R2 and R3.
NEW QUESTION # 177
Referring to the exhibit, how do you verify the status of the tunnel from R1?
Answer: C
Explanation:
To verify the status of the tunnel from R1, you would issue a ping from the source address that is assigned to R1's end of the tunnel. In the exhibit, we can see that the tunnel interface (gre-
0/0/0.0) has the IP address 198.51.100.1 on R1. Therefore, to test the tunnel's status, you should ping the IP address at the other end of the tunnel (which is likely the address on User B's interface or another interface on R2) from R1's tunnel source address.
NEW QUESTION # 178
You are asked to configure an LSP which uses the OSPF link state database for path computations. Which two statements are correct in this scenario? (Choose two.)
Answer: C,D
Explanation:
In Junos OS, traffic engineering extensions for OSPF, which are required for an LSP to use the OSPF link state database for path computations, are not enabled by default. They must be explicitly enabled in the OSPF configuration. Therefore, answer C is correct. Answer B is incorrect and contradicts C. The 'no-cspf' command would disable CSPF (Constrained Shortest Path First), which is used for path computations in MPLS traffic engineering, so it should not be used if you want the LSP to utilize OSPF's link state database for path computations. Therefore, answer A is incorrect. The 'policing' parameter is not relevant to enabling traffic engineering extensions in OSPF, so answer D is incorrect.
NEW QUESTION # 179
Which feature allows Junos OS to perform recursive lookups for static route next hops?
Answer: C
Explanation:
In standard routing, astatic routeis typically considered valid only if the specified next-hop IP address is directly reachable on a local subnet. However, in complex service provider designs, the next-hop might be a
"distant" IP address that is reachable through another route (such as a BGP route or another static route). This process of looking up a next-hop within another routing entry is calledrecursive lookup.
In Junos OS, theresolve (Option A)parameter is explicitly used to enable this behavior for static routes.
According to Juniper technical documentation, when you append the resolve keyword to a static route configuration, you are instructing the Routing Engine to search the routing table to find a path to that distant next-hop.
For example:
set routing-options static route 10.1.1.0/24 next-hop 192.168.100.1 resolve If 192.168.100.1 is not on a local interface but is reachable via an OSPF route, the router will "resolve" the path and install the 10.1.1.0/24 route into the forwarding table using the OSPF path's exit interface.
Why other options are incorrect:
* Discard (Option B)andReject (Option C)are "next-hop types" used to drop traffic, either silently (discard) or by sending an ICMP unreachable message (reject).
* Next-table (Option D)is used forInter-VRF routing, where the router is told to look up the destination in a completely different routing instance (like a VRF table), which is a different architectural function than a recursive next-hop lookup within the same table.
NEW QUESTION # 180
A BGP router receives two routes to the same prefix. One route has a higher local preference, while the other has a shorter AS path.
In this scenario, which route would be selected?
Answer: D
Explanation:
Local preference is evaluated before the AS path length in the BGP best-path selection process.
A route with a higher local preference is therefore preferred even if another route has a shorter AS path.
NEW QUESTION # 181
......
With the JN0-364 certification exam you can climb up the corporate ladder faster and achieve your professional career objectives. Do you plan to enroll in the Juniper JN0-364 certification exam? Looking for a simple and quick way to crack the JN0-364 test? If your answer is yes then you need to start Juniper JN0-364 Test Preparation with Juniper JN0-364 PDF Questions and practice tests. With the Prep4King Service Provider Routing and Switching, Specialist (JNCIS-SP) JN0-364 practice test questions you can prepare yourself shortly for the final Juniper JN0-364 exam.
Exam JN0-364 Labs: https://www.prep4king.com/JN0-364-exam-prep-material.html
BONUS!!! Download part of Prep4King JN0-364 dumps for free: https://drive.google.com/open?id=1NO_lUTiQNNEUQAlzcZDfoocNrct6GorW