DOWNLOAD the newest Pass4Leader NCP-BC-7.5 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1atktfjv7OitbojPzPFgSqFo8H7slmj5T
Our supporter of NCP-BC-7.5 study guide has exceeded tens of thousands around the world, which directly reflects the quality of them. Because the exam may put a heavy burden on your shoulder while our NCP-BC-7.5 practice materials can relieve you of those troubles with time passing by. Just spent some time regularly on our NCP-BC-7.5 Exam simulation, your possibility of getting it will be improved greatly. For your information, the passing rate of our NCP-BC-7.5 training engine is over 98% up to now.
| Section | Objectives |
|---|---|
| Nutanix Disaster Recovery Solutions | - Recovery workflows using Nutanix native tools - Integration with third-party backup solutions - Metro Availability configuration and management - Failover procedures and execution - Configuring and managing replication policies |
| Security and Hardening | - RBAC implementation for disaster recovery - Approval policies configuration - Security best practices for replication - Designing secure BCDR environments |
| Monitoring, Testing and Troubleshooting | - Resolving third-party backup integration problems - Troubleshooting permission issues and misconfigured DR environments - Documenting runbooks for incident response - Non-disruptive recovery testing - Diagnosing network, storage and replication failures - Setting up alerts for replication lag |
| BCDR Fundamentals and Requirements Interpretation | - Translating business requirements into resilient recovery architectures - Availability metrics and SLA definitions - Selecting appropriate replication types (async, near-sync, synchronous, metro) - Defining recovery strategies aligned to business requirements and risk tolerance - Understanding RTO and RPO concepts and business impact analysis |
| Replication and Failover Architecture | - Asynchronous replication planning - Network segmentation for BCDR environments - Recovery site capacity management - Synchronous replication across sites - Failover readiness validation |
| Data Protection and Snapshots | - Snapshot scheduling and management - Snapshot retention policies design - Incremental backup implementation - Storage configuration for BCDR - Data restoration at VM and application level |
>> Practice NCP-BC-7.5 Exams Free <<
Pass4Leader Nutanix NCP-BC-7.5 Exam Questions And Answers provide you test preparation information with everything you need. About Nutanix NCP-BC-7.5 exam, you can find these questions from different web sites or books, but the key is logical and connected. Our questions and answers will not only allow you effortlessly through the exam first time, but also can save your valuable time.
NEW QUESTION # 44
An administrator has recently completed the initial configuration of Nutanix Disaster Recovery for a production environment. Protection Policies and Recovery Plans have been configured and validated by the senior infrastructure team.
The administrator has confirmed that the expected categories are correctly associated with both the Protection Policies and Recovery Plans. During a scheduled test failover, the administrator notices that several VMs are missing from the recovery.
The administrator reviews the environment and notes the following:
* The Protection Summary tab does not show any warnings or errors
* No replication tasks are currently ongoing
* The missing VMs were all deployed within the last two weeks as part of a new application rollout
* The missing VMs are running on the same cluster as other VMs that recovered successfully during the test failover
* The application team followed the standard VM deployment checklist but did not coordinate with the infrastructure team during provisioning Given this information, what is the most likely cause of the missing VMs?
Answer: D
Explanation:
Modern Nutanix Disaster Recovery (Leap) relies on " Categories " to automate the inclusion of virtual machines into Protection Policies and Recovery Plans. When a Protection Policy is created, it is typically applied to a category (e.g., AppType:SQL) rather than individual VM names.
In this scenario, the newly deployed VMs were missed during a test failover despite other VMs on the same cluster recovering successfully. The most likely root cause is that the application team, working independently, failed to assign the required categories to the new VMs during the provisioning process.
Because the VMs lacked the correct category tags, the Nutanix Protection Policy did not " see " them, and consequently, no recovery points were ever created for them. This is a common operational failure in environments where " infrastructure as code " or strict provisioning standards are not enforced. Recovery Plans (Option A) do not need manual re-synchronization for new VMs if the categories are correctly mapped.
While an initial sync is required (Option D), it would typically show a task or progress rather than just leaving the VMs " missing " from the entire protection summary. Therefore, verifying category assignment is the primary troubleshooting step.
NEW QUESTION # 45
Which native Nutanix tool is used to determine connectivity between two sites during disaster recovery testing?
Answer: B
Explanation:
Disaster recovery success depends on the stability of the network link and the health of the services responsible for data replication. Nutanix Cluster Check (NCC) is the primary native health-monitoring tool for the Nutanix environment. NCC includes a comprehensive suite of checks specifically designed for Data Protection and BCDR.
During disaster recovery setup or testing, an administrator can run NCC to verify that the clusters are correctly paired, that remote site connectivity is functional, and that the required ports (such as 2009 and
2020) are open and reachable. Specific NCC checks like remote_site_connectivity_check or replication_health_check provide granular insights into whether the " handshake " between the primary and recovery sites is succeeding. While acli (Acropolis CLI) or ecli (Erasure Coding CLI) are used for managing VMs or storage disks, they do not provide the high-level diagnostic capabilities of NCC. By regularly running NCC, an administrator can proactively identify connectivity issues-such as firewall changes or routing failures-that could otherwise lead to replication failures and compromise the organization ' s recovery objectives.
NEW QUESTION # 46
How does the system behave if the network cannot sustain the data change rate required to maintain a 1- minute RPO between the primary and recovery AZs?
Answer: A
Explanation:
Nutanix NearSync replication is designed to provide very low RPOs (1 to 15 minutes) by using " Lightweight Snapshots " (LWS). To maintain a 1-minute RPO, the system requires sufficient network bandwidth to transfer the delta changes before the next snapshot interval begins.
If the network bandwidth is insufficient or if the VM ' s data change rate (churn) suddenly spikes beyond the network ' s capacity to keep up, the system is designed to prioritize protection over RPO strictness. In this scenario, the Nutanix Cerebro service will automatically " downshift " the replication from NearSync to standard Asynchronous replication mode. This transition allows the system to use more traditional, robust snapshots that can handle longer transfer times, ensuring that the VM remains protected, even if the RPO temporarily increases to an hourly interval. Once the network conditions improve or the data churn decreases, the system will automatically attempt to " upshift " back to the 1-minute NearSync schedule. This behavior prevents application performance issues like write-pausing (Option D) or I/O degradation (Option A) and avoids unnecessary failovers (Option C), providing a resilient and adaptive data protection mechanism.
NEW QUESTION # 47
An administrator incorrectly used the " Activate " functionality on the PD to test failover of VMs from production to DR cluster. The VMs were successfully restored on the DR side. What steps are needed to clean up the VMs on the DR side and resume normal operations on the Production cluster?
Answer: C
Explanation:
In Nutanix Disaster Recovery using Protection Domains (PDs), " Activate " is a high-level command used to promote a remote site to an active state. This is typically reserved for an unplanned failover scenario when the primary site is completely offline. If an administrator mistakenly uses " Activate " for a test instead of the proper " Test Failover " workflow, the secondary cluster will begin treating the replicated snapshots as active, live virtual machines. This process involves promoting the storage and registering the VMs to the local hypervisor.
To return to a steady state where the production cluster is the only active site, the administrator must perform a cleanup on the DR cluster. The " Deactivate " command on the DR cluster serves two main purposes: it changes the Protection Domain status from " Active " back to " Standby " and provides an option to " Destroy VMs " associated with that PD. Choosing to destroy the VMs on the DR cluster is essential to prevent duplicate VM instances or IP address conflicts when production resumes. Simply deleting the VMs manually (Option C) is insufficient because it does not reset the PD ' s metadata status in the Nutanix Cerebro service.
By deactivating the PD and destroying the VMs at the DR site, the administrator ensures that the DR site returns to its role as a passive replication target, allowing the primary production cluster to continue its operations without being impacted by the accidental activation.
NEW QUESTION # 48
An administrator migrates a guest VM from a legacy Protection Domain-based DR configuration to a Prism Central (PC)-based Protection Policy. Immediately after migration, the administrator considers deleting the legacy Protection Domain snapshots to reclaim storage. According to Nutanix guidance, when is it safe to delete the legacy Protection Domain snapshots?
Answer: D
Explanation:
Transitioning from legacy Protection Domains (which are cluster-centric) to modern Prism Central-based Protection Policies (which are management-plane centric) is a common task during Nutanix environment upgrades. This migration involves a " handoff " where the responsibility for snapshots and replication shifts from the local Cerebro service on the cluster to the global orchestration provided by Prism Central.
The primary risk during this migration is the creation of a " protection gap. " If an administrator deletes the legacy snapshots immediately after assigning a new policy, and that new policy has not yet successfully completed its first replication cycle, the virtual machine is effectively unprotected. If a disaster occurs at that exact moment, there would be no valid recovery points at the destination site to restore from. Nutanix best practice dictates that legacy artifacts must be preserved until the new system is verified as operational. Once the first recovery point for the VM appears in the Prism Central " Recovery Points " tab, it confirms that the new Protection Policy has successfully captured the VM ' s state and replicated it to the recovery AZ. At this stage, the legacy snapshots in the Protection Domain become redundant and can be safely deleted to reclaim storage space without compromising the organization ' s ability to meet its Recovery Point Objective (RPO) and Recovery Time Objective (RTO).
NEW QUESTION # 49
......
To pass the Nutanix Certified Professional - Business Continuity (NCP-BC) 7.5 (NCP-BC-7.5) certification exam you need to prepare well with the help of top-notch Nutanix Certified Professional - Business Continuity (NCP-BC) 7.5 (NCP-BC-7.5) exam questions which you can download from platform. On this platform, you will get valid, updated, and real Nutanix NCP-BC-7.5 Dumps for quick exam preparation.
NCP-BC-7.5 Valid Test Materials: https://www.pass4leader.com/Nutanix/NCP-BC-7.5-exam.html
BTW, DOWNLOAD part of Pass4Leader NCP-BC-7.5 dumps from Cloud Storage: https://drive.google.com/open?id=1atktfjv7OitbojPzPFgSqFo8H7slmj5T