Not only Juniper JN0-352 study guide has the advantage of high-quality, but also has reasonable prices that are accessible for every one of you. So it is incumbent upon us to support you. On the other side, we know the consumers are vulnerable for many exam candidates are susceptible to ads that boost about Juniper JN0-352 skills their practice with low quality which may confuse exam candidates like you, so we are trying hard to promote our high quality Juniper JN0-352 study guide to more people.
| Section | Weight | Objectives |
|---|---|---|
| IS-IS | 10-15% | - Adjacency establishment, levels and metrics - Configuration and route exchange - Scalable enterprise deployment and troubleshooting |
| Layer 2 Switching and VLANs | 15-20% | - Spanning Tree Protocol (STP, RSTP, MSTP) operation and configuration - VLAN concepts, configuration, trunking and tagging - Link Aggregation Groups (LAG) and Virtual Chassis |
| High Availability and Resiliency | 5-10% | - Network resiliency design and troubleshooting - Redundancy protocols and failover mechanisms - Graceful restart and non-stop routing |
| IP Multicast | 5-10% | - PIM Dense Mode, Sparse Mode and RP mechanisms - Multicast routing monitoring and troubleshooting - IGMP operation and configuration |
| BGP | 15-20% | - Routing policies, filtering and common troubleshooting - Route advertisement, attributes and path selection - Neighbor relationships and session establishment |
| Tunnels and Overlays | 5-10% | - GRE, IP-IP and dynamic tunnel configuration - Overlay network design and connectivity - Tunnel types, encapsulation and operation |
| Protocol Independent Routing | 10-15% | - Routing instances and route selection criteria - Routing tables, static routes and route preference - Basic routing policy and filter operation |
| OSPF | 15-20% | - Neighbor formation, area design and LSA types - Configuration, verification and troubleshooting - Route summarization and redistribution |
| Layer 2 Security | 10-15% | - Port security, MAC limiting and storm control - DHCP snooping, Dynamic ARP Inspection and IP Source Guard - Layer 2 firewall filters and security features |
Up to now, more than 98 percent of buyers of our JN0-352 practice braindumps have passed it successfully. And our JN0-352 training materials can be classified into three versions: the PDF, the software and the app version. Though the content is the same, but the displays are different due to the different study habbits of our customers. So we give emphasis on your goals, and higher quality of our JN0-352 Actual Exam.
NEW QUESTION # 50
Which statement concerning Bidirectional Forwarding Detection (BFD) is true for the configuration shown in the exhibit?
Answer: B
NEW QUESTION # 51
Which statement about configuring persistent MAC learning is correct?
Answer: D
NEW QUESTION # 52
You are troubleshooting a Layer 2 topology issue in a campus network. The switches are running RSTP. You need to verify which switch is currently acting as the root bridge and identify the root port on the local device.
Which operational command should the administrator use to view this information?
Answer: C
Explanation:
The show spanning-tree bridge command is specifically designed to surface exactly the two pieces of information required in this scenario within a single output. Its Root ID field reports the full Bridge Identifier (priority and MAC address) of whichever switch has been elected root bridge for the spanning-tree instance in question, immediately answering which switch in the campus network is currently acting as root, regardless of whether that happens to be the local device or a remote one. In the same output, the command's Root port field explicitly names the specific local interface (for example, ge-0/0/1.0) that the local switch has selected as its path toward that root bridge, directly answering the second part of the requirement without needing to cross-reference a separate command. Together, these two fields give a complete, immediate picture of both root bridge identity and local root port selection from one operational command. show spanning-tree interface instead presents a per-interface breakdown of STP role (root, designated, alternate, backup) and state across all local ports, which can indirectly reveal the root port by looking for the 'Root' role, but it does not directly report the Root ID/root bridge identity in the same structured way that show spanning-tree bridge does. show ethernet-switching table and show ethernet-switching interface pertain entirely to MAC address learning and switching-specific interface configuration respectively, and neither surfaces any spanning-tree topology or root bridge information at all. Reference topics: Junos Enterprise Switching - Spanning Tree Protocols, Verifying Root Bridge and Root Port with show spanning-tree bridge.
NEW QUESTION # 53
You want to verify prefix information being sent from 10.36.1.4.
Which two statements are correct about the output shown in the exhibit? (Choose two.)
Answer: C,D
Explanation:
The AS path attribute shows AS numbers (e.g., 65401 65520.), indicating the route's traversal through one or various autonomous systems.
The output displays the selected routes and the attributes with which they were received, but does not show the effects of import policy on the routing attributes.
Nothing indicates that the routes have been received from an IBGP peer. The asterisks only indicates whether the routes have been imported into the routing table (RIB) after the application of the import policies.
https://www.juniper.net/documentation/us/en/software/junos/cli-reference/topics/ref/command/show-route-receive-protocol.html
NEW QUESTION # 54
Click the Exhibit button. Which two statements about the IS-IS output shown in the exhibit are correct? (Choose two.)
Answer: A,D
Explanation:
This detailed adjacency output shows R3 maintaining four separate, fully Up adjacencies, evenly split between the two IS-IS levels. R1 and R2 are both formed at Level 1, confirming that R3 is directly adjacent to exactly two Level 1 neighbors within its local area, which validates that statement. R4 and R5 are both formed at Level 2, and Level 2 adjacencies are, by definition, part of the IS-IS backbone that interconnects areas; a router maintaining any Level 2 adjacency is by that fact participating in and connected to the Level 2 backbone, confirming R3's backbone connectivity as well. Every one of the four listed adjacencies explicitly shows 'Speaks: IP, IPv6' in its detail output, which is Junos's way of indicating that both the IPv4 and IPv6 address families have been successfully negotiated and are active over that circuit; this directly contradicts, rather than supports, the claim that IPv6 is disabled on these neighbors -- if IPv6 were disabled, the Speaks field would list only IP. Regarding authentication, the output contains no field, flag, or indication whatsoever referencing authentication configuration or state for the R5 adjacency (or any adjacency); Junos would typically surface authentication-related information separately if it were configured and relevant, and its complete absence here means no basis exists in the exhibit to conclude authentication is required for that specific adjacency.
NEW QUESTION # 55
......
Our passing rate is very high to reach 99% and our JN0-352 exam torrent also boost high hit rate. Our JN0-352 study questions are compiled by authorized experts and approved by professionals with years of experiences. Our JN0-352 study questions are linked tightly with the exam papers in the past and conform to the popular trend in the industry. Thus we can be sure that our JN0-352 Guide Torrent are of high quality and can help you pass the JN0-352 exam with high probability.
JN0-352 Practical Information: https://www.trainingdump.com/Juniper/JN0-352-practice-exam-dumps.html