P.S. Free & New NSEI_OTS_AR-7.6 dumps are available on Google Drive shared by Pass4SureQuiz: https://drive.google.com/open?id=1HF5Uk9-yzLZ0jIwA22Qcploa2nLuYnPm
These features have made Pass4SureQuiz NSEI_OTS_AR-7.6 pdf questions format the most reputable prep material for the quick and restrictions-free exam preparation. As laptops, tablets, and smartphones support this Fortinet NSEI_OTS_AR-7.6 pdf format, you can easily learn from your comfort zone in your free time.
| Section | Objectives |
|---|---|
| Topic 1: Network security | - Configure security inspections for industrial protocols - Configure automation - Configure virtual patching |
| Topic 2: Monitoring and risk assessment | - Analyze security reports from FortiAnalyzer - Perform risk assessment and management - Create FortiAnalyzer event handlers |
| Topic 3: Network access control | - Configure network access authentication - Configure network segmentation schemas - Explain OT Ethernet concepts |
| Topic 4: Asset management | - Fortinet Security Fabric for an OT network - Implement device detection on FortiGate and FortiNAC - Explain OT standard and Fortinet compliance |
>> NSEI_OTS_AR-7.6 Test Simulator Online <<
Once you have used our NSEI_OTS_AR-7.6 exam training guide in a network environment, you no longer need an internet connection the next time you use it, and you can choose to use NSEI_OTS_AR-7.6 exam training at your own right. Our NSEI_OTS_AR-7.6 exam training do not limit the equipment, do not worry about the network, this will reduce you many learning obstacles, as long as you want to use NSEI_OTS_AR-7.6 Test Guide, you can enter the learning state. And you will find that our NSEI_OTS_AR-7.6 training material is the best exam material for you to pass the NSEI_OTS_AR-7.6 exam.
NEW QUESTION # 22
Refer to the exhibit.
A Run_report task is shown. You want to automate the generation of a newly created report on FortiAnalyzer . When you configure the Run_report task in Playbook, why is the report not shown in the Report field? (Choose two answers)
Answer: B,E
Explanation:
Based on the architecture of FortiAnalyzer within the Security Fabric and its automation capabilities:
* Automation Stitch and Reports : Within the Security Fabric environment, FortiAnalyzer serves as a key element in creating automation stitches and playbooks. For a report to be selectable within a Playbook task (such as the Run_report task shown in the exhibit), it must meet specific technical prerequisites in the report configuration.
* Auto-cache Requirement (Answer C) : For a report to be used for automated generation, it must be " ready " to be processed by the engine without manual intervention. Auto-cache must be enabled in the report settings to ensure the report can be generated dynamically and efficiently when triggered by the playbook.
* Extended Log Filtering (Answer B) : Playbooks often pass specific variables from the trigger (such as a specific device IP or a time range) into the report. For the report to accept these dynamic parameters and be visible as an " automation-compatible " report in the Playbook interface, Extended Log Filtering must be enabled.
* Workflow Constraints : Without these two settings enabled on the report itself, the Playbook engine cannot guarantee the report ' s successful generation or parameter injection, and thus filters it out of the available selection list in the Run_report task.
NEW QUESTION # 23
Which industrial protocol does not support VLANs? (Choose one answer)
Answer: D
Explanation:
The correct answer is C. EtherCAT .
The study guide states that for industrial Ethernet protocols, "such as Ethernet/IP and Modbus/TCP, you can use VLANs to segment your physical LAN into multiple logical LANs." This directly confirms that Ethernet/IP and Modbus/TCP support VLAN-based segmentation in the OT context.
By contrast, the guide explains that "EtherCAT skips layers 3 to 6 to deliver real-time communication" and describes it as an "Open-Software Modified-Ethernet" approach. Because it does not operate like the standard Ethernet/IP model used for normal VLAN-based segmentation, EtherCAT is the protocol identified here as not supporting VLANs in the way Ethernet/IP and Modbus/TCP do.
So, based on the study guide comparison, the verified answer is EtherCAT .
NEW QUESTION # 24
Refer to the exhibit.
A partial OT network is shown. You have configured the FortiGate device with VLANs to segment the OT network. The supervisor now wants to connect to the PLC from the Engineering Workstation. How can you allow access from the Engineering Workstation to the PLC? (Choose one answer)
Answer: C
Explanation:
The correct answer is D. You must configure a layer 3 switch .
The study guide explains that "Layer 2 devices can add or remove tags" but "cannot modify them." It then states that "A layer 3 device, such as a router or FortiGate, can modify the VLAN tag before routing the packet. This allows them to route traffic between VLANs." It also explicitly describes
"Router on a Stick" as "a way to allow routing between VLANs." Since the exhibit shows a layer-2 switch and the Engineering Workstation and PLC are placed in different VLANs, inter-VLAN communication requires layer-3 routing.
The other options do not solve this requirement. intra-switch-policy explicit/implicit applies to a software switch , where member interfaces are in the same broadcast domain and same subnet, not to routing between separate VLANs. forward domain IDs are used in transparent mode to confine broadcasts to specific broadcast domains; they do not provide inter-VLAN access. Therefore, to let the Engineering Workstation in one VLAN reach the PLC in another VLAN, you need a layer 3 routing function , which matches option D .
NEW QUESTION # 25
During layer 2 polling , which two pieces of information are gathered by FortiNAC to identify a device?
(Choose two answers)
Answer: A,C
NEW QUESTION # 26
Refer to the exhibit.
A simplified OT network is shown. You want to optimize the protection of this OT network. Which two controls must you implement? (Choose two answers)
Answer: C,D
Explanation:
The correct answers are B. IPS on FortiGate_Level5 and C. Virtual patching on FortiGate_Level2 .
The study guide explains that "the first line of defense is securing the IT side of your network" and that FortiGate should be placed to protect ICS environments and stop threats from propagating from IT into OT. It also states that IPS improves OT security because "today's threat landscape requires IPS to block a wider range of threats and improve OT security" and that in IPS mode, vulnerable devices are protected . This makes FortiGate_Level5 , at the upper boundary near the DMZ and external connectivity, the correct place to implement IPS as a primary protection control.
The study guide also states in the Purdue model section that "Level 2 consists of the processes and programs that control the PLCs, RTUs, and IEDs found at Level 1" and that "it is necessary to segment, or even microsegment, these servers with firewall segmentation, along with policies that include application control and virtual patching." In addition, the virtual patching section says "Virtual patching protects OT devices that have not yet been updated against vulnerability exploits" and applies when traffic related to the vulnerable device reaches the firewall policy. Since FortiGate_Level2 sits between the process network and the control network, it is the right enforcement point for virtual patching to protect the PLC-side assets.
Option A is not one of the best answers because offline IDS only detects and logs attacks; the guide says "no traffic flows through FortiGate" in offline IDS mode, whereas IPS can actually block threats. Option D is also not the best answer because OT signatures are enabled within the IPS framework, but the stronger control explicitly described for this design is to deploy IPS at the upper boundary and virtual patching closer to vulnerable OT devices .
NEW QUESTION # 27
......
There may be a lot of people feel that the preparation process for NSEI_OTS_AR-7.6 exams is hard and boring, and hard work does not necessarily mean good results, which is an important reason why many people are afraid of examinations. Today, our NSEI_OTS_AR-7.6 Exam Materials will radically change this. High question hit rate makes you no longer aimless when preparing for the exam, so you just should review according to the content of our NSEI_OTS_AR-7.6 study guide prepared for you.
Mock NSEI_OTS_AR-7.6 Exam: https://www.pass4surequiz.com/NSEI_OTS_AR-7.6-exam-quiz.html
DOWNLOAD the newest Pass4SureQuiz NSEI_OTS_AR-7.6 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1HF5Uk9-yzLZ0jIwA22Qcploa2nLuYnPm