P.S. Free & New JN0-351 dumps are available on Google Drive shared by Pass4sures: https://drive.google.com/open?id=1enEtJtvijkaKZKLMhl44LNUS2YdJs3dV
If you want to progress and achieve their ideal life, if you are not satisfied with life now, if you still use the traditional methods by exam, so would you please choose the JN0-351 test materials, it will surely make you shine at the moment. Our JN0-351 latest dumps provide users with three different versions, including a PDF version, a software version, and an online version. Although involved three versions of the teaching content is the same, but for all types of users can realize their own needs, whether it is which version of JN0-351 Learning Materials, believe that can give the user a better learning experience. Below, I would like to introduce you to the main advantages of our research materials, and I'm sure you won't want to miss it.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
>> JN0-351 Official Cert Guide <<
In the case of studying with outdated Enterprise Routing and Switching, Specialist (JNCIS-ENT) (JN0-351) practice questions, you will fail and lose your resources. Pass4sures made an JN0-351 Questions for the students so that they don't get confused to prepare for JN0-351 Certification Exam successfully in a short time. Pass4sures has designed the real JN0-351 exam dumps after consulting many professionals and receiving positive feedback.
NEW QUESTION # 179
Exhibit
You have configured a GRE tunnel. To reduce the risk of dropping traffic, you have configured a keepalive OAM probe to monitor the state of the tunnel; however, traffic drops are still occurring.
Referring to the exhibit, what is the problem?
Answer: C
Explanation:
Explanation
A keepalive OAM probe is a mechanism that can be used to monitor the state of a GRE tunnel and detect any failures in the tunnel path. A keepalive OAM probe consists of sending periodic packets from one end of the tunnel to the other and expecting a reply. If no reply is received within a specified time, the tunnel is considered down and the line protocol of the tunnel interface is changed to down1.
To configure a keepalive OAM probe for a GRE tunnel, you need to specify two parameters: the keepalive-time and the hold-time. The keepalive-time is the interval between each keepalive packet sent by the local router. The hold-time is the maximum time that the local router waits for a reply from the remote router before declaring the tunnel down2.
According to the Juniper Networks documentation, the hold-time value must be two times the keepalive-time value for a GRE tunnel2. This is because the hold-time value must account for both the round-trip time of the keepalive packet and the processing time of the remote router. If the hold-time value is too small, it may cause false positives and unnecessary tunnel flaps.
In the exhibit, the configuration shows that the keepalive-time is set to 10 seconds and the hold-time is set to
15 seconds for the gr-1/1/10.1 interface. This means that the local router will send a keepalive packet every 10 seconds and will wait for 15 seconds for a reply from the remote router. However, this hold-time value is not two times the keepalive-time value, which violates the recommended configuration. This may cause traffic drops if the remote router takes longer than 15 seconds to reply.
Therefore, option D is correct, because the hold-time value must be two times the keepalive-time value for a GRE tunnel. Option A is incorrect, because BFD is not required for GRE tunnels; BFD is another protocol that can be used to monitor tunnels, but it is not compatible with GRE keepalives3. Option B is incorrect, because the "event link-adjacency-loss" option is not related to GRE tunnels; it is an option that can be used to trigger an action when a link goes down4. Option C is incorrect, because LLDP does not need to be removed from the gr-1/1/10.1 interface; LLDP is a protocol that can be used to discover neighboring devices and their capabilities, but it does not interfere with GRE tunnels5.
References:
1: Configuring Keepalive Time and Hold time for a GRE Tunnel Interface 2: keepalive | Junos OS | Juniper Networks 3: Configuring Bidirectional Forwarding Detection 4: event link-adjacency-loss | Junos OS | Juniper Networks 5: Understanding Link Layer Discovery Protocol
NEW QUESTION # 180
Which two statements are correct about tunnels? (Choose two.)
Answer: A,C
Explanation:
A tunnel is a connection between two computer networks, in which data is sent from one network to another through an encrypted link. Tunnels are commonly used to secure data communications between two networks or to connect two networks that use different protocols.
Option B is correct, because tunnel endpoints must have a valid route to the remote tunnel endpoint. A tunnel endpoint is the device that initiates or terminates a tunnel connection. For a tunnel to be established, both endpoints must be able to reach each other over the underlying network. This means that they must have a valid route to the IP address of the remote endpoint 1 .
Option D is correct, because tunnels add additional overhead to packet size. Tunnels work by encapsulating packets: wrapping packets inside of other packets. This means that the original packet becomes the payload of the surrounding packet, and the surrounding packet has its own header and trailer. The header and trailer of the surrounding packet add extra bytes to the packet size, which is called overhead. Overhead can reduce the efficiency and performance of a network, as it consumes more bandwidth and processing power 2 .
Option A is incorrect, because BFD can be used to monitor tunnels. BFD is a protocol that can be used to quickly detect failures in the forwarding path between two adjacent routers or switches. BFD can be integrated with various routing protocols and link aggregation protocols to provide faster convergence and fault recovery. BFD can also be used to monitor the connectivity of tunnels, such as GRE, IPsec, or MPLS.
Option C is incorrect, because IP-IP tunnels are stateless. IP-IP tunnels are a type of tunnels that use IP as both the encapsulating and encapsulated protocol. IP-IP tunnels are simple and easy to configure, but they do not provide any security or authentication features. IP-IP tunnels are stateless, which means that they do not keep track of the state or status of the tunnel connection. Stateless tunnels do not require any signaling or negotiation between the endpoints, but they also do not provide any error detection or recovery mechanisms.
References:
1 : What is Tunneling? | Tunneling in Networking 2 : What Is Tunnel In Networking, Its Types, And Its Benefits? : [Configuring Bidirectional Forwarding Detection] : [IP-IP Tunneling]
NEW QUESTION # 181
Which two statements about the firewall filter terms shown in the exhibit are true? (Choose two.)
Answer: A,D
NEW QUESTION # 182
You must implement filter-based forwarding. You need to direct traffic from the 192.168.1.0/24 through vr1 and traffic from 10.210.0.128/26 through vr2.
Which configuration is correct in this scenario?
Answer: D
NEW QUESTION # 183
You enable persistent MAC learning on your Juniper switch. In this scenario, which statement is correct?
Answer: D
NEW QUESTION # 184
......
The Juniper wants to win the trust of Juniper JN0-351 exam candidates at any cost. To do this the Juniper is offering some important features with Juniper JN0-351 exam. These JN0-351 Exam Questions features are valid, updated, and real Juniper JN0-351 exam questions, availability of Juniper JN0-351 exam questions in three different formats.
JN0-351 Download Free Dumps: https://www.pass4sures.top/JNCIS-ENT/JN0-351-testking-braindumps.html
2026 Latest Pass4sures JN0-351 PDF Dumps and JN0-351 Exam Engine Free Share: https://drive.google.com/open?id=1enEtJtvijkaKZKLMhl44LNUS2YdJs3dV