BONUS!!! Download part of Prep4sures VNX301 dumps for free: https://drive.google.com/open?id=1jtCVB8lFQfvQI2lUxtwYrehLsYxaoq4e
Prep4sures Versa Networks VNX301 practice test software is another great way to reduce your stress level when preparing for the VNX301. With our software, you can practice your excellence and improve your competence on the Versa Networks VNX301 exam dumps. Each Versa Networks VNX301 Practice Exam, composed of numerous skills, can be measured by the same model used by real examiners. Prep4sures Versa Networks VNX301 practice test has real Versa Networks VNX301 exam questions.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
>> Certified VNX301 Questions <<
In this knowledge-dominated world, the combination of the knowledge and the practical working competences has been paid high attention to is extremely important. If you want to improve your practical abilities you can attend the VNX301 certificate examination. Passing the VNX301 Certification can prove that you boost both the practical abilities and the knowledge and if you buy our VNX301 latest question you will pass the VNX301 exam smoothly.
NEW QUESTION # 46
A branch uses a template variable for the WAN VLAN ID. During deployment, Branch-A receives VLAN
100 and Branch-B receives VLAN 200 from device bind data while using the same template. Which statement is correct?
Answer: B
Explanation:
The correct answer is A . Versa template-based provisioning is designed to separate common configuration from site-specific values. A device template can define common interface, service, routing, and SD-WAN behavior, while variables and device bind data provide unique values for each appliance. This allows the same template to be reused across many branches while assigning different WAN IP addresses, gateways, VLAN IDs, circuit names, or other per-site parameters during onboarding.
In this scenario, Branch-A and Branch-B use the same template but receive different WAN VLAN IDs from bind data. That is normal and expected in a scalable SD-WAN deployment. Without variables, administrators would need to create a separate template for every site, which would be operationally inefficient and increase configuration drift.
The Controller does not automatically rewrite VLAN IDs after IPsec comes up; VLAN IDs must be part of the generated device configuration. It is also not required to duplicate the device template for each branch. The correct Versa design is reusable templates plus unique bind-data values.
NEW QUESTION # 47
You are configuring the BGP routing protocol between a Versa Secure SD-WAN CPE with AS number
64514 and two upstream service providers: SP1 with AS number 64515 and SP2 with AS number 64519. You want to prefer BGP routes learned from AS 64515 over routes learned from AS 64519. Which BGP path attribute would be used to accomplish this task?
Answer: A
Explanation:
The correct answer is LOCAL_PREF . In BGP, the Local Preference attribute is used inside an autonomous system to influence which exit path is preferred for outbound traffic. In this scenario, the Versa Secure SD- WAN CPE receives routes from two upstream service providers, SP1 and SP2. To prefer routes learned from AS 64515 over routes learned from AS 64519, you would apply a BGP import or route policy that assigns a higher local preference to routes received from SP1. Versa SD-WAN design guidance shows this exact routing concept: an import policy can manipulate the Local-Pref attribute to prefer one advertised route path over another. The Versa output examples also display "Local Preference" as a BGP route attribute used in route selection.
MULTI_EXIT_DISC, or MED, is generally used to influence how a neighboring AS enters your AS, not how your CPE prefers routes learned from different upstreams. ORIGIN is part of BGP best-path selection but is not normally the administrative tool used to prefer one provider. NEXT_HOP identifies the next-hop address and does not directly define route preference.
NEW QUESTION # 48
Examine the CLI output in the exhibit.
You are reviewing the OSPF adjacency on a VOS CPE, and the output is shown in the exhibit. In this scenario, what is the probable cause of the OSPF adjacency issue?
Answer: B
Explanation:
The correct answer is B . The exhibit shows the OSPF neighbor in the exst state, which means Exchange Start . Versa documentation lists the OSPF neighbor state codes and identifies exst as "exchange start," followed by exchange, loading, and full. In normal OSPF adjacency formation, neighbors progress through initialization and two-way communication before they negotiate database exchange. If the neighbor becomes stuck in ExStart or Exchange, a common and highly probable cause is an MTU mismatch between the two OSPF peers. During database description packet negotiation, the peers must agree on parameters that allow LSDB exchange; an MTU mismatch can prevent the adjacency from advancing to Full.
Option A is less likely because an area mismatch usually prevents the neighbor relationship from forming correctly rather than leaving it stuck in ExStart. Option C is also incorrect because the neighbor has already progressed beyond early states, which indicates that bidirectional communication has occurred. Option D is not the best answer because dropping OSPF multicast 224.0.0.5 would typically prevent discovery or keep the adjacency in an earlier state, not specifically in ExStart.
Therefore, the probable cause is an interface MTU mismatch.
NEW QUESTION # 49
Examine the exhibit below.
You are deploying Versa Secure SD-WAN and require high availability for the Versa Directors. You configured the Versa Director high availability parameters shown in the exhibit. With the parameters shown, which two statements are true? (Choose two.)
Answer: B,C
Explanation:
Comprehensive and Detailed 150 to 250 words of Explanation From Versa Networks SDWAN Topics:
The correct answers are B and D . In the exhibit, Enable Auto Switchover is not selected. However, the Failover Timeout value is configured as 300 seconds . Versa Director HA documentation states that the Failover Timeout is the timeout period before the standby Director node can promote itself to become the active Director node. Therefore, if the active or primary Director fails, the backup Director can automatically assume the active role after the failover condition and timeout are met.
The important distinction is that Auto Switchover controls revertive behavior after recovery, not the initial standby takeover during failure. Versa documentation explains that Director HA is non-revertive by default.
This means that when the designated master or primary Director comes back online after recovery, it is not automatically promoted back to active unless automatic switchover is enabled. To make the designated active Director automatically reclaim the active state after recovery, Enable Auto Switchover must be selected and the Auto Switchover Timeout must expire.
NEW QUESTION # 50
Examine the exhibit below.
Referring to the exhibit, which two statements are correct? (Choose two.)
Answer: A,D
Explanation:
The correct answers are A and B . In the exhibit, the LAN interface shows a fixed VLAN ID value of 100 .
Because this value is directly configured in the template rather than represented as a per-device variable, every branch that uses this template will receive the same LAN VLAN ID. This supports option A. Versa configuration examples show that VLAN-tagged interfaces are created by defining logical units with a vlan- id, and organizations then use those tagged interfaces for traffic identification and routing services.
For the MPLS WAN network , the VLAN ID field is shown as a variable or bind-data style value rather than a fixed number. This allows each branch device to receive a different MPLS VLAN ID during onboarding, depending on the branch-specific values supplied in the workflow or device bind data. Therefore, branches can have separate VLAN IDs on the MPLS WAN transport, which supports option B. Versa SD-WAN troubleshooting output also shows WAN interfaces as logical VNI subinterfaces, such as vni-0/1.0 and vni-0/2.
0, mapped to SD-WAN transport networks like INET and MPLS.
Option C is incorrect because an INET interface can be untagged, commonly represented with VLAN ID 0. Option D is incorrect because the MPLS VLAN field is intentionally parameterized, not incorrectly configured.
NEW QUESTION # 51
......
The number of questions of the VNX301 preparation questions you have done has a great influence on your passing rate. And we update the content as well as the number of the VNX301 exam braindumps according to the exam center. As for our VNX301 Study Materials, we have prepared abundant exercises for you to do. You can take part in the real VNX301 exam after you have memorized all questions and answers accurately. And we promise that you will get a 100% pass guarantee.
New VNX301 Test Forum: https://www.prep4sures.top/VNX301-exam-dumps-torrent.html
P.S. Free & New VNX301 dumps are available on Google Drive shared by Prep4sures: https://drive.google.com/open?id=1jtCVB8lFQfvQI2lUxtwYrehLsYxaoq4e