By practicing our 4A0-D03 exam braindumps, you will get the most coveted certificate smoothly. Before getting ready for your exam, having the ability to choose the best 4A0-D03 practice materials is the manifestation of wisdom. Our 4A0-D03 training engine can help you effectively pass the exam within a week. That is also proved that we are worldwide bestseller. Come and buy our 4A0-D03 study dumps, you will get unexpected surprise.
| Section | Weight | Objectives |
|---|---|---|
| Data Center Interconnect (DCI) Solutions | 25% | - BGP route policies and route reflectors - Gateway-less EVPN DCI - Interoperability with Nokia 7750 SR |
| SR Linux and EVPN Fundamentals | 25% | - VXLAN encapsulation and underlay - EVPN control plane and MP-BGP - SR Linux architecture and CLI |
| Layer 2 EVPN Services | 25% | - EVPN Route Types 1–4 - Anycast Gateway and IRB - Multi-homing and Ethernet Segments |
| Layer 3 EVPN Services | 25% | - VRF integration and route targets - EVPN Route Type 5 - Symmetric and asymmetric routing |
A wise man can often make the most favorable choice to buy our 4A0-D03 study materials, i believe you are one of them. If you are not at ease before buying our 4A0-D03 actual exam, we have prepared a free trial for you. Just click on the mouse to have a look, giving you a chance to try on our 4A0-D03 learning guide. Perhaps this choice will have some impact on your life. And our 4A0-D03 training braindumps are the one which can change your life.
NEW QUESTION # 51
Consider the exhibit.
All three leafs have an EVPN MP-BGP session with the route reflector in Spine-1. Leaf-2 and Leaf-3 have existing instances of an L2 EVPN named MAC VRF-1. Leaf-1 has just enabled a new instance of MAC VRF-1.
Which of the following steps is NOT taken when this new instance is enabled?
Answer: C
Explanation:
Comprehensive and Detailed 150 to 250 words of Explanation From [SR Linux EVPN and Data Center Interconnect/Course Guide/topics]:
When a new Layer 2 EVPN MAC-VRF instance is enabled, the PE advertises an Inclusive Multicast Ethernet Tag route, commonly called an IMET route or EVPN route type 3. The IMET route is used to auto-discover remote PEs that participate in the same EVPN service and to build the BUM flooding list for that MAC-VRF. In this topology, all leaf routers peer with the route reflector on Spine-1. Leaf-1 therefore advertises its IMET route to the route reflector, not directly to Leaf-2 and Leaf-3. The route reflector then reflects the EVPN update to the other client leaves. Leaf-2 and Leaf-3 import the route based on matching route-target policy and add Leaf-1 to the replication list for broadcast, unknown unicast, and multicast traffic. Option B is the step that is not taken because it incorrectly describes direct leaf-to-leaf EVPN advertisement. In a route-reflector design, the RR centralizes EVPN route distribution and avoids the need for a full mesh of MP-BGP EVPN sessions between leaves. Reference: EVPN RT-3 IMET route, route-reflector operation, BUM flooding-list auto-discovery.
NEW QUESTION # 52
Which EVPN route-type (RT) is used in multi-homing scenarios to support aliasing and fast convergence?
Answer: D
Explanation:
Comprehensive and Detailed 150 to 250 words of Explanation From [SR Linux EVPN and Data Center Interconnect/Course Guide/topics]:
The EVPN route type used for aliasing and fast convergence in multi-homing is RT-1, the Ethernet Auto-Discovery route. RT-1 has two important forms: Ethernet A-D per Ethernet Segment and Ethernet A-D per EVI. These routes advertise reachability to a multi-homed Ethernet Segment and to a specific EVPN instance on that segment. Remote PEs use this information for aliasing, meaning they can forward traffic toward any eligible PE attached to the same Ethernet Segment, even when a specific MAC was advertised by only one PE. RT-1 also supports fast convergence because withdrawal of Ethernet A-D routes quickly informs remote PEs that an attachment path or PE is no longer valid, avoiding slow MAC aging as the primary failure-detection mechanism. RT-4 Ethernet Segment routes are related to multi-homing, but their main function is Ethernet Segment discovery and Designated Forwarder election. RT-2 advertises host MAC/IP reachability, and RT-3 builds multicast/BUM replication lists. Therefore, RT-1 is the precise answer for aliasing and fast convergence. Reference: EVPN multi-homing route types, Ethernet Auto-Discovery, aliasing and convergence behavior.
NEW QUESTION # 53
A host is connected to multiple PEs through multi-homing.
Which of the following is NOT a function of the EVPN route-type 4 route?
Answer: D
Explanation:
Comprehensive and Detailed 150 to 250 words of Explanation From [SR Linux EVPN and Data Center Interconnect/Course Guide/topics]:
EVPN route type 4 is the Ethernet Segment route. Its core role is to advertise Ethernet Segment membership so that PEs attached to the same multi-homed segment can discover each other. This discovery is essential for multi-homing procedures such as DF election, split-horizon behavior, and redundancy handling. When multiple PEs advertise the same ESI, the EVPN control plane can build the candidate set of PEs that participate in that Ethernet Segment. This enables DF election for BUM forwarding and supports the correct interpretation of the segment's redundancy model. The incorrect statement is option C. The election algorithm itself is not the basic function of the route type 4 advertisement in the way the question frames it. The route type is primarily about Ethernet Segment discovery and participation; the algorithmic decision process is derived from configured DF election behavior and candidate information, not from route type 4 acting as a generic algorithm identifier. Therefore, route type 4 enables DF procedures, but it is not described as the mechanism that identifies the election algorithm type. Reference: EVPN RT-4 Ethernet Segment route, DF election, multi-homing discovery.
NEW QUESTION # 54
An IRB sub-interface that is being used to interconnect a MAC-VRF to an IP-VRF, is configured with anycast-gw set to true and anycast-gw enabled.
Which of the following statements is FALSE?
Answer: B
Explanation:
Comprehensive and Detailed 150 to 250 words of Explanation From [SR Linux EVPN and Data Center Interconnect/Course Guide/topics]:
An anycast-gateway IRB allows multiple PEs to present the same default-gateway IP address to hosts in the same subnet. This is the mechanism that enables distributed gateway behavior in EVPN fabrics. The same anycast gateway IP may be configured on equivalent IRB subinterfaces across remote PEs participating in the same IP-VRF, allowing hosts to use the nearest leaf as their default gateway without changing their gateway address. SR Linux also associates gateway MAC information with the IRB, including virtual gateway MAC behavior used inside the MAC-VRF forwarding table. Option C is false because the anycast gateway IP is not treated as a normal unique host route that appears in the IP-VRF route table alongside the subnet prefix. The subnet route is installed for the connected network, but the shared anycast gateway address is a gateway function, not a separately advertised host endpoint that should appear as ordinary routed host reachability. Treating the anycast IP as a regular host route would undermine the distributed gateway model and create ambiguous ownership across PEs. Reference: IRB anycast gateway, MAC-VRF/IP-VRF interconnection, distributed default-gateway operation.
NEW QUESTION # 55
Consider the exhibit.
Which of the following is NOT configured on dcgw10 to support the Layer 3 VPN connectivity?
Answer: C
Explanation:
Comprehensive and Detailed 150 to 250 words of Explanation From [SR Linux EVPN and Data Center Interconnect/Course Guide/topics]:
In an integrated gateway-based data center interconnect design, the gateway must interwork between the data center EVPN/VXLAN domain and the WAN VPN transport domain. For Layer 3 VPN connectivity on a Nokia 7750 SR integrated gateway, the base BGP instance must support the relevant VPN address families, such as VPN-IPv4 and EVPN, because the gateway participates in control-plane exchange between the data center and WAN sides. The VPRN must also be associated with the WAN transport, normally through MPLS tunnel binding, and the VRF target must match the corresponding VPRN on the remote gateway so that VPN routes are imported and exported correctly. A routed VXLAN interface, however, is an SR Linux IP-VRF/VXLAN construct used for symmetric L3 EVPN forwarding inside a VXLAN-based data center fabric. In this question, dcgw10 is acting as the integrated WAN gateway for L3VPN connectivity, so a routed VXLAN interface is not the required configuration item on the VPRN instance. Reference: integrated gateway DCI, VPRN over MPLS, EVPN-to-VPN interworking.
NEW QUESTION # 56
......
There is no royal road to sucess, and only those who do not dread the fatiguing climb of gaining its numinous summits. A valid IT certification will contribute to your future. 4A0-D03 study guide files will help you get a certification easily. Let's try to make the best use of our resources and take the best way to clear exams with 4A0-D03 Study Guide files. If you are an efficient working man, purchasing valid study guide files will be suitable for you.
4A0-D03 Exam Bible: https://www.braindumpsit.com/4A0-D03_real-exam.html