New SRAN-Radio-Network-Performance-Optimization Test Pass4sure, New SRAN-Radio-Network-Performance-Optimization Exam Pattern

There are a lot of advantages if you buy our SRAN-Radio-Network-Performance-Optimization training guide. And one of them is that you can enjoy free updates for one year after purchase. In order to avoid the omission of information, please check your email regularly. The content of SRAN-Radio-Network-Performance-Optimization Exam Materials is very comprehensive, and we are constantly adding new things to it. As long as you purchase SRAN-Radio-Network-Performance-Optimization practice prep, you will not need any other learning products.

Nokia SRAN-Radio-Network-Performance-Optimization Exam Syllabus Topics:

SectionWeightObjectives
Topic 1: SRAN Optimization Tools and Reports10-15%- Nokia NetAct and performance tools
- Configuration management for optimization
- Report generation and interpretation
- Automated optimization features
Topic 2: SRAN Architecture and Fundamentals15-20%- SRAN solution components and functions
- SRAN network architecture overview
- Radio access concepts and principles
- Single RAN integration principles
Topic 3: Radio Network Performance Monitoring20-25%- Real-time network monitoring techniques
- Threshold configuration and alerting
- KPI definition and measurement
- Performance monitoring tools and dashboards
- Performance data collection and analysis
Topic 4: Performance Troubleshooting20-25%- Network failure identification and resolution
- Common performance issues diagnosis
- Root cause analysis methodologies
- Optimization case studies
- Troubleshooting tools utilization
Topic 5: Radio Network Optimization Techniques25-30%- Load balancing techniques
- Parameter tuning best practices
- Coverage optimization methods
- Interference analysis and mitigation
- Capacity optimization strategies
- Handover optimization

>> New SRAN-Radio-Network-Performance-Optimization Test Pass4sure <<

New Nokia SRAN-Radio-Network-Performance-Optimization Exam Pattern | Reliable SRAN-Radio-Network-Performance-Optimization Exam Blueprint

The authority of Real4exams in Nokia SRAN-Radio-Network-Performance-Optimization exam questions rests on its being high-quality and prepared according to the latest pattern. Real4exams is proud to announce that our Nokia SRAN-Radio-Network-Performance-Optimization Exam Dumps help the desiring candidates of Nokia SRAN-Radio-Network-Performance-Optimization certification to climb the ladder of success by grabbing the Nokia Exam Questions.

Nokia MN: NCSS NPS - SRAN Radio Network Performance Optimization Certification Exam | GS40-NPS-SRPER-E-S03-2510 Sample Questions (Q27-Q32):

NEW QUESTION # 27
Consider that the UE is performing handover from LTE to NR with the help of features CB007742 / CB008731 . Referring to the picture below, at what stage can the handover be triggered from LTE to NR?

Answer: C

Explanation:
The correct answer is C: From Stage 3 .
In LTE-to-NR mobility, the handover or redirection decision is normally based on a combination of:
LTE serving-cell signal level becoming weak enough, and
NR neighbor-cell signal level becoming strong enough.
From the diagram:
In Stage 1 , LTE is still good and NR is still weak, so LTE-to-NR HO should not be triggered.
In Stage 2 , the NR neighbor signal is improving, but the required combined LTE/NR mobility condition is not yet fully satisfied.
In Stage 3 , the NR neighbor signal has crossed the required NR threshold, while the LTE serving-cell signal has degraded enough to justify moving the UE from LTE to NR. This is the first valid stage where LTE-to- NR HO can be triggered.
In Stage 4 , NR is already clearly strong, but the handover could already have been triggered earlier in Stage 3.


NEW QUESTION # 28
Which of the following statements does not apply to mmWave radio propagation ?

Answer: C

Explanation:
The correct answer is C .
At mmWave / FR2 frequencies , radio propagation is more challenging than in low-band or mid-band spectrum. Diffraction becomes weaker, blockage is more severe, foliage attenuation is high, and building penetration loss is significant. This is why mmWave networks usually require dense site grids, line-of-sight or near-line-of-sight paths, and strong beamforming. Industry mmWave references consistently describe high path loss, high penetration loss, and the need for directional antenna systems to compensate for these losses.
Option C does not apply because water absorption and atmospheric absorption generally become more relevant at higher frequencies, not lower. Rain, humidity, and oxygen/water-vapor absorption are important considerations for mmWave link budgets.
So the statement that does not apply to mmWave propagation is:
Low water absorption at high frequencies.


NEW QUESTION # 29
In the context of radio capacity management , what is the significance of Scheduling Request periodicity ?

Answer: A

Explanation:
The correct answer is C .
Scheduling Request , or SR , is used by the UE to request uplink resources when it has uplink data to send.
The SR periodicity defines how often the UE gets an opportunity to send this scheduling request.
A shorter SR periodicity means the UE can request uplink resources more quickly, which improves uplink latency. However, it consumes more PUCCH/control-channel resources, reducing the number of UEs that can be efficiently supported.
A longer SR periodicity saves control-channel resources and can support more connected users, but it increases uplink access delay.
Therefore, SR periodicity is important because it creates a trade-off between:
Lower latency and higher connected-user capacity.


NEW QUESTION # 30
The CB009425 feature provides several enhancements to improve the transmission link budget for VoNR, offering a better customer experience. Which statements are correct regarding this feature?

Answer: A

Explanation:
The correct answer is D.
The feature is focused on improving VoNR link robustness and user experience, especially near the cell edge or in difficult RF conditions. VoNR is sensitive to packet loss, delay, and uplink coverage limitations.
Therefore, link-budget improvement features commonly target BLER behavior, transport block sizing, and MCS robustness.
Statement A is correct because minimizing Packet Loss Rate, or PLR, directly improves VoNR speech quality and reduces mute, clipping, or robotic voice effects.
Statement B is correct because VoNR bearers can use specific initial BLER targets. A more suitable BLER target helps the scheduler choose a more robust MCS for voice traffic.
Statement C is correct because a configurable uplink minimum TBS, or Transport Block Size, helps ensure that small VoNR packets are transmitted efficiently and reliably.
Statement D is correct because MCS downgrade control can improve robustness by selecting a more conservative modulation and coding scheme for VoNR DRBs when radio conditions require it.
Therefore, all listed enhancements are part of the VoNR link-budget improvement concept:
A, B, C, and D.


NEW QUESTION # 31
At which mark are all conditions fulfilled for energy saving , so the cell will be switched off? Refer to the image below.

Answer: A

Explanation:
The correct answer is B , which corresponds to mark C in the diagram.
In the diagram, the energy-saving process follows these stages:
Before mark B , the cell is entering the power-saving period, but the required load condition has not yet been satisfied for the required duration.
At mark B , the measured load has gone below the configured threshold, but the cell is not switched off immediately. The system must confirm that the load remains below the required threshold for the configured time.
At mark C , the load has stayed below the required threshold for the required duration, shown as 5 minutes in the diagram. At this point, all conditions are fulfilled, and the cell can be switched off. The diagram also shows the state becoming:
energySavingState = energySaving
Marks D and E are already inside or near the later part of the power-saving period. Mark E is associated with operator suspension/exit behavior, not the initial moment when all switch-off conditions are first fulfilled.


NEW QUESTION # 32
......

Real4exams offers authentic and up-to-date SRAN-Radio-Network-Performance-Optimization study material that every candidate can rely on for good preparation. Our top priority is to help you pass the MN: NCSS NPS - SRAN Radio Network Performance Optimization Certification Exam | GS40-NPS-SRPER-E-S03-2510 (SRAN-Radio-Network-Performance-Optimization) exam on the first try. The cost of registering for a certification MN: NCSS NPS - SRAN Radio Network Performance Optimization Certification Exam | GS40-NPS-SRPER-E-S03-2510 (SRAN-Radio-Network-Performance-Optimization) exam is quite expensive, ranging between $100 and $1000. After paying such an amount, the candidate is sure to be on a tight budget. Real4exams provides MN: NCSS NPS - SRAN Radio Network Performance Optimization Certification Exam | GS40-NPS-SRPER-E-S03-2510 (SRAN-Radio-Network-Performance-Optimization) preparation material at very low prices compared to other platforms. We also assure you that the amount will not be wasted and you will not have to pay for the MN: NCSS NPS - SRAN Radio Network Performance Optimization Certification Exam | GS40-NPS-SRPER-E-S03-2510 (SRAN-Radio-Network-Performance-Optimization) certification test for a second time.

New SRAN-Radio-Network-Performance-Optimization Exam Pattern: https://www.real4exams.com/SRAN-Radio-Network-Performance-Optimization_braindumps.html