2026 Latest DumpsTorrent JN0-664 PDF Dumps and JN0-664 Exam Engine Free Share: https://drive.google.com/open?id=1J7mjhYOuoSNc2L2OH0QEyBoZj12nPNTP
The JN0-664 guide torrent is compiled by the experts and approved by the professionals with rich experiences. The JN0-664 prep torrent is the products of high quality complied elaborately and gone through strict analysis and summary according to previous exam papers and the popular trend in the industry. The language is simple and easy to be understood. It makes any learners have no learning obstacles and the JN0-664 Guide Torrent is appropriate whether he or she is the student or the employee, the novice or the personnel with rich experience and do the job for many years.
| Section | Objectives |
|---|---|
| Layer 3 VPNs | - L3VPN Deployment
|
| BGP | - Advanced BGP Features
|
| MPLS | - RSVP and Traffic Engineering
|
| IGP | - IS-IS
|
| Multicast | - Multicast Routing
|
| Layer 2 VPNs | - L2VPN Technologies
|
>> JN0-664 Official Practice Test <<
What do you think of using DumpsTorrent Juniper JN0-664 Exam Dumps? DumpsTorrent Juniper JN0-664 certification training dumps, it may be said, is the most excellent reference materials among all exam-related reference materials. Why? There are four reasons in the following. Firstly, DumpsTorrent exam dumps are researched by IT experts who used their experience for years and can figure out accurately the scope of the examinations. Secondly, DumpsTorrent exam dumps conclude all questions that can appear in the real exam. Thirdly, DumpsTorrent exam dumps ensures the candidate will pass their exam at the first attempt. If the candidate fails the exam, DumpsTorrent will give him FULL REFUND. Fourthly, DumpsTorrent exam dumps have two versions: PDF and SOFT version. With the two versions, the candidates can pass their exam with ease.
NEW QUESTION # 89
Which two statements are correct about the customer interface in an LDP-signaled pseudowire?
(Choose two.)
Answer: A,D
NEW QUESTION # 90
Exhibit
CE-1 must advertise ten subnets to PE-1 using BGP Once CE-1 starts advertising the subnets to PE-1, the BGP peering state changes to Active.
Referring to the CLI output shown in the exhibit, which statement is correct?
Answer: D
Explanation:
Analyzing the Exhibit and Understanding the Issue
The exhibit shows BGP configurations on CE-1 and PE-1, which are connected via EBGP.
CE-1 (Customer Edge)
Uses AS 64511 and establishes an EBGP session with PE-1 (AS 65550).
Configured to export 10 static routes (192.168.1.0/24 - 192.168.10.0/24) using the static-to-bgp policy.
PE-1 (Provider Edge)
Uses AS 65550 and is peering with CE-1 (AS 64511).
Configured with a prefix-limit of 5 on received routes from CE-1.
Teardown enabled, meaning if more than 5 prefixes are received, the BGP session is shut down.
Identifying the Problem
CE-1 is correctly configured with peer AS 65550, so Option B ("CE-1 is configured with an incorrect peer AS") is incorrect ❌.
CE-1 is advertising exactly 10 static routes (as per policy).
PE-1 has a prefix-limit maximum 5 with teardown enabled.
This means that when CE-1 advertises more than 5 prefixes, PE-1 shuts down the BGP session.
BGP moves to the "Active" state, indicating that the session has been disrupted and PE-1 is trying to re-establish the connection.
CE-1 is reachable since the session was initially established before the limit was exceeded, so Option D ("CE-1 is unreachable") is incorrect ❌.
CE-1 is not advertising its entire routing table, only the static prefixes listed in the policy, so Option A ("CE-1 is advertising its entire routing table") is incorrect ❌.
Correct Answer
✅ C. The prefix limit has been reached on PE-1
Verification from Juniper Documentation
Juniper BGP Prefix Limit Documentation confirms that exceeding the prefix limit with teardown causes the BGP session to go into "Active" state.
Juniper Troubleshooting Guide for BGP Peering Issues states that when a BGP session reaches the prefix limit and has teardown enabled, the session is terminated.
NEW QUESTION # 91
Exhibit
R1 and R8 are not receiving each other's routes
Referring to the exhibit, what are three configuration commands that would solve this problem? (Choose three.)
Answer: A,B,D
Explanation:
The problem in this scenario is that R1 and R8 are not receiving each other's routes because of private AS numbers in the AS path. Private AS numbers are not globally unique and are not advertised to external BGP peers. To solve this problem, you need to do the following:
* Configure loops on routers in AS 65412 and advertise-peer-as on routers in AS 64498. This allows R5 and R6 to advertise their own AS number (65412) instead of their peer's AS number (64498) when sending updates to R7 and R8. This prevents a loop detection issue that would cause R7 and R8 to reject the routes from R5 and R62.
* Configure remove-private on advertisements from AS 64497 toward AS 64498 and from AS 64500
* toward AS 64499. This removes any private AS numbers from the AS path before sending updates to external BGP peers. This allows R2 and R3 to receive the routes from R1 and R4, respectively3.
NEW QUESTION # 92
Exhibit
A network designer would like to create a summary route as shown in the exhibit, but the configuration is not working.
Which three configuration changes will create a summary route? (Choose three.)
Answer: B,C,E
Explanation:
Explanation
To create a summary route for IS-IS, you need to configure a policy statement that matches the prefixes to be summarized and sets the next-hop to discard. You also need to configure a summary-address statement under the IS-IS protocol hierarchy that references the policy statement. In this case, the policy statement leak-v6 is trying to match the prefix 2001:db9:a:fa00::/61 exactly, but this prefix is not advertised by any router in the network. Therefore, no summary route is created. To fix this, you need to delete the longer keyword from the route-filter term and change the prefix length to /61 exact. This will match any prefix that falls within the /61 range. You also need to delete the export statement under protocols isis, because this will export all routes that match the policy statement to other IS-IS routers, which is not desired for a summary route.
NEW QUESTION # 93
Exhibit
You have MAC addresses moving in your EVPN environment
Referring to the exhibit, which two statements are correct about the sequence number? (Choose two)
Answer: A,B
Explanation:
The sequence number is a field in the MAC mobility extended community that is used to resolve conflicting MAC address ownership claims and to help the local PE to identify the latest advertisement. The sequence number is incremented by one for every MAC address mobility event, such as when a host moves from one Ethernet segment to another segment in the EVPN network. The PE device that receives multiple MAC advertisements for the same MAC address chooses the one with the highest sequence number as the most recent and valid advertisement.
NEW QUESTION # 94
......
Choose a good JN0-664 exam quiz and stick with it, you will be successful! Our JN0-664 study questions will provide you with professional guidance and quality resources, but you must also be aware of the importance of adherence. As you know, life is like the sea. Only firm people will reach the other side. After you have chosen JN0-664 Preparation materials, we will stay with you until you reach your goal.
JN0-664 Valid Examcollection: https://www.dumpstorrent.com/JN0-664-exam-dumps-torrent.html
P.S. Free & New JN0-664 dumps are available on Google Drive shared by DumpsTorrent: https://drive.google.com/open?id=1J7mjhYOuoSNc2L2OH0QEyBoZj12nPNTP