The JN0-364 study materials from our company are very convenient for all people, including the convenient buying process, the download way and the study process and so on. Upon completion of your payment, you will receive the email from us in several minutes, and then you will have the right to use the JN0-364 Study Materials from our company. In addition, there are three different versions for all people to choose. According to your actual situation, you can choose the suitable version from our JN0-364 study materials.
| Section | Weight | Objectives |
|---|---|---|
| Open Shortest Path First (OSPF) | 15-20% | - Link-state database - Configuration and troubleshooting - LSA types and operation - Areas and router types |
| Tunnels | 5-8% | - Tunnel configuration and usage - GRE and IP-IP tunnels |
| IPv6 | 8-12% | - Static and dynamic routing - OSPFv3 and BGP for IPv6 - Address types and format - Autoconfiguration |
| Intermediate System to Intermediate System (IS-IS) | 10-15% | - PDUs and TLVs - Adjacencies and levels - Configuration and monitoring - Metrics and wide metrics |
| Layer 2 Bridging and VLANs | 8-12% | - VLANs and trunking - Bridging concepts - Service provider switching features |
| Spanning Tree Protocols | 8-12% | - Port roles and states - BPDU and protection features - Configuration and convergence - STP, RSTP, MSTP, VSTP |
| Border Gateway Protocol (BGP) | 20-25% | - Basic operation and message types - Configuration and troubleshooting - Path selection and attributes - IBGP and EBGP - Policy and route filtering |
| High Availability | 5-8% | - Nonstop active routing - NSR and GRES concepts - Graceful restart |
| Protocol-Independent Routing | 10-15% | - Filter-based forwarding - Routing instances and RIB groups - Martian addresses - Static, aggregate, and generated routes - Load balancing |
| Multiprotocol Label Switching (MPLS) | 12-18% | - Labels and LIB - Terminology and forwarding - Segment routing basics - LDP and RSVP - Configuration and monitoring |
The Juniper JN0-364 certification exam is one of the hottest certifications in the market. This Juniper JN0-364 exam offers a great opportunity to learn new in-demand skills and upgrade your knowledge level. By doing this successful JN0-364 Service Provider Routing and Switching, Specialist (JNCIS-SP) exam candidates can gain several personal and professional benefits.
NEW QUESTION # 98
Referring to the exhibit. Which prefix in the output shown in the exhibit is an external prefix injected by an OSPF router?
Answer: C
Explanation:
In the OSPF routing table output, prefixes are marked with different route types. An external prefix injected into OSPF is marked as 'Ext' (External) followed by a number that indicates whether it's an E1 or E2 route. The prefix 172.18.1.0/24 is marked as Ext2, which indicates that it is an external route that has been redistributed into OSPF from another routing protocol or static configuration.
NEW QUESTION # 99
Exhibit:
Referring to the exhibit, R1 and R2 are advertising the same prefix 203.0.113.0/24 to R3 and R4 over EBGP. R3 and R4 both advertise this prefix to R5. Which advertisement does R5 choose to install in its routing table?
Answer: C
Explanation:
In a Juniper Networks environment, when a router receives multiple BGP paths for the same destination prefix, it utilizes theBGP Path Selection Algorithmto determine the single "best" path to install in the routing table and advertise to other peers. This selection process follows a strict hierarchy of attributes.
According to Juniper Networks technical documentation, the very first attribute evaluated by the BGP process (after ensuring the next hop is reachable) is theLocal Preference. Local preference is a well-known discretionary attribute used to communicate a preference for a specific exit point from the local Autonomous System (AS). A higher local preference value is always preferred over a lower one.
Analyzing the exhibit:
* R3receives the prefix from R1 and applies an export policy to its IBGP session that sets thelocal preference to 150.
* R4receives the same prefix from R2 and applies an export policy to its IBGP session that sets thelocal preference to 200.
* R5receives both of these IBGP updates from R3 and R4.
When R5 runs the best-path algorithm for the 203.0.113.0/24 prefix, it compares the local preference values.
Since the path from R4 has a local preference of 200 and the path from R3 has a local preference of 150, R5 immediately selects the path fromR4as the best route. Because BGP is designed to prevent loops and maintain a consistent view, only this single best path is installed as the active route in R5's routing table (inet.0).
Options B and D are incorrect because they imply multiple paths are installed for forwarding, which only occurs if specific multipath load-balancing is configured, which is not indicated here.
NEW QUESTION # 100
An OSPF router does not have a router ID configured.
In this scenario, which statement is correct about the router ID?
Answer: B
Explanation:
The router identifier is used by BGP and OSPF to identify the routing device from which a packet originated. The router identifier usually is the IP address of the local routing device. If you do not configure a router identifier, the IP address of the first interface to come online is used. This is usually the loopback interface. Otherwise, the first hardware interface with an IP address is used In OSPF, if a router ID is not manually configured, Junos OS will automatically select the router ID based on the highest IP address of any of the router's loopback interfaces. If no loopback interface exists, the highest IP address of any active interface will be used. Therefore, answer C is correct.
NEW QUESTION # 101
Which feature allows Junos OS to perform recursive lookups for static route next hops?
Answer: B
Explanation:
The resolve option enables recursive next-hop resolution for static routes in Junos OS. When configured, the router performs a lookup in the routing table to determine how to reach the specified next-hop address, allowing the next hop to be resolved through another route instead of requiring it to be directly connected.
NEW QUESTION # 102
What are two types of SIDs used in segment routing? (Choose two.)
Answer: A,B
NEW QUESTION # 103
......
each JN0-364 practice torrent in our online store before the listing, are subject to stringent quality checks within the company. Just focus on spending the most practice to use our JN0-364 test materials. After careful preparation, I believe you will be able to pass the exam. This is a wise choice, after using our JN0-364 Exam Question, you will realize your dream of a promotion. Therefore, when you are ready to review the exam, you can fully trust our JN0-364 practice torrent, choose our learning materials. If you don't want to miss out on such a good opportunity, buy it quickly!
Reliable JN0-364 Exam Test: https://www.passtorrent.com/JN0-364-latest-torrent.html