What's more, part of that Actual4dump 300-515 dumps now are free: https://drive.google.com/open?id=1qXp3J7rsO_nUHmYlgSLYyf3lnRE3M89j
Our 300-515 preparation materials are willing to give you some help if you want to be better in your daily job and get a promotion on matter on the salary or on the position. Those who have used 300-515 training engine have already obtained an international certificate and have performed even more prominently in their daily work. As it should be, they won the competition. So as they wrote to us that our 300-515 Exam Questions had changed their life.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: IPv6 VPNs | 10% | - Troubleshoot IPv6 VPN provider edge (PE-PE, PE-CE) - Describe IPv6 VPN routing requirements (MP-BGP, PE-CE) |
| Topic 2: VPN Architecture | 25% | - Describe L3VPN data plane (underlay label, VRF forwarding, VPNv6) - Compare VPN architecture (Layer 2 vs Layer 3, Inter-AS/Intra-AS) - Describe L3VPN control plane (MP-BGP, RD, RT, VPN labels, VRF, PE-CE) - Troubleshoot underlay (Core IGP, LSP) - Describe Layer 2 service architecture (IOS XR Ethernet Flowpoints, IOS XE EVCs) |
| Topic 3: Layer 2 VPNs | 30% | - Troubleshoot L2VPN services (E-LAN, E-Line, E-Tree) - Describe EVPN concepts (data plane/control plane, multihoming, suppression, forwarding) - Implement Ethernet OAM - Implement EVPN (IRB, VPWS, native) |
| Topic 4: Layer 3 VPNs | 35% | - Describe routing requirements (MP-BGP, PE-CE routing) - Implement extranet/shared services (route targets/policy) - Describe Inter-AS L3VPNs (Options A, B, AB, C) - Implement multicast VPN (Intranet, Extranet, mLDP) - Troubleshoot Intra-AS L3VPNs (PE-CE, PE-PE, PE-RR) - Describe CSC concepts |
For quick and complete Implementing Cisco Service Provider VPN Services (300-515) exam preparation you can trust Actual4dump Cisco 300-515 Exam Questions. With the Cisco 300-515 practice test questions you can ace your Implementing Cisco Service Provider VPN Services (300-515) exam preparation and be ready to perform well in the final Cisco 300-515 certification exam.
NEW QUESTION # 63
Refer to the exhibit. OSPF is used as an underlayer routing protocol in the backbone network of this ISP. A network engineer recently configured R1 with ip cef and mpls label range 1000 2000.
Several days later, the engineer replaced a failed RP module on R1. After the replacement, one of the customer's MPLS LSPs went down with the error message LSP-ERROR-Indication:No Label Resources. Which action must the engineer take to resolve the issue?
Answer: A
Explanation:
Because the pseudowire is bound to a non-IP interface (Gi0/0/0 has "no ip address"), LDP must be run as a targeted session over the loopback addresses. Replacing the RP module cleared that neighbor relationship, so you must re-establish it with the mpls ldp neighbor 10.0.0.2 targeted command.
NEW QUESTION # 64
Refer to the exhibit.
PE1 and PE2 are exchanging VPNv4 routes for CE1 and CE2, and PE3 contains the default route to the internet. If the three devices are operating normally, which two conclusions describe this configuration? (Choose two.)
Answer: A,B
NEW QUESTION # 65
An engineer is investigating an EVPN traffic flow issue. Which type of traffic should the engineer allow in an EVPN Tree Service in order to fix this issue?
Answer: B
NEW QUESTION # 66
Refer to the exhibit. OSPF routers R1 and R2 are connected via a 1G Ethernet link. R1 has IP address 10.1.1.1/24 on its Gi0/0/1 interface, and R2 has IP address 10.1.1.2/24 on its Gi0/0/1 interface OSPF with process ID 1 is configured on both routers, and both routers are in the same OSPF area. However, R1 cannot establish an OSPF adjacency with R2. The network engineer who is troubleshooting the problem found these log messages on R1. Which action must the engineer take to resolve the issue?
Answer: D
Explanation:
The debug on R1 reports "incorrect ospf process id in packet received," meaning R2 is sending hellos from a different (or absent) OSPF instance. Enabling router ospf 1 globally on R2 starts the same process-ID that R1 is running, so the packets are accepted and the adjacency forms.
NEW QUESTION # 67
Refer to the exhibit. An engineer is implementing an MVPN solution between the source and the receiver. Streamers are connected and are forwarding streams to the AG1 source. The setup box is now receiving the multicast stream. Which additional action must the engineer take so that receiver RA also receives the stream?
Answer: D
Explanation:
In an MVPN deployment you must explicitly activate the default (and data) MDT branch on each receiver's PE so it will join the mLDP tree and pull in the multicast stream. On RA you do this by entering the address-family ipv4 mdt stanza under the MP-BGP neighbor for RC and issuing the neighbor <RC-loopback> activate command.
NEW QUESTION # 68
......
If you have the certification the exam, you can enter a better company, and your salary will also be doubled. 300-515 training materials can help you pass the exam and obtain corresponding certification successfully. 300-515 exam materials are edited by experienced experts, and they possess the professional knowledge for the exam, and you can use it with ease. We have online and offline chat service, they possess the professional knowledge for the exam, and you can consult them any questions that bothers you. We offer you free update for one year for 300-515 Exam Dumps, and our system will send the latest version to you automatically.
Dump 300-515 File: https://www.actual4dump.com/Cisco/300-515-actualtests-dumps.html
What's more, part of that Actual4dump 300-515 dumps now are free: https://drive.google.com/open?id=1qXp3J7rsO_nUHmYlgSLYyf3lnRE3M89j