P.S. Free 2026 Cisco 350-101 dumps are available on Google Drive shared by Pass4sureCert: https://drive.google.com/open?id=1c0UgR4yH8DdLDAl7t49X9CpnlvhxOc0i
Our 350-101 training materials are compiled by professional experts. All the necessary points have been mentioned in our 350-101 practice engine particularly. About some tough questions or important points, they left notes under them. Besides, our experts will concern about changes happened in 350-101 study prep all the time. Provided you have a strong determination, as well as the help of our 350-101 learning guide, you can have success absolutely.
| Section | Objectives |
|---|---|
| Topic 1: Wireless Security | - WPA/WPA2/WPA3 security mechanisms - 802.1X and authentication methods |
| Topic 2: Cisco Wireless Architecture | - Wireless LAN Controller (WLC) concepts - Lightweight Access Point (LAP) operation |
| Topic 3: Wireless Deployment and Design | - Channel planning and interference mitigation - Site survey and RF planning |
| Topic 4: Mobility and Roaming | - Mobility groups and handoff mechanisms - Client roaming behavior |
| Topic 5: Wireless Fundamentals | - WLAN components and architecture basics - RF principles and radio frequency behavior - 802.11 standards overview |
| Topic 6: Troubleshooting and Monitoring | - Performance monitoring and diagnostics - Wireless connectivity troubleshooting |
As the saying goes, an inch of gold is an inch of time. The more efficient the study guide is, the more our candidates will love and benefit from it. It is no exaggeration to say that you can successfully pass your 350-101 exams with the help our 350-101 learning torrent just for 20 to 30 hours even by your first attempt. And to cater to our customers' different study interests and hobbies, we have multiple choices on the 350-101 Exam Materials versions for you to choose: the PDF, the Software and the APP online.
NEW QUESTION # 80
Refer to the exhibit. A retail business is deploying guest wireless across its remote branch locations. Each branch uses FlexConnect APs in local switching mode, and the central wireless LAN controller is configured with an ACL named CWA_REDIRECT. Cisco ISE is configured to return this ACL during the authentication process for central web authentication (CWA). However, when clients attempt to connect to the guest wireless LAN, they are added to the exclusion list. Which configuration step resolves the connectivity issue?
Answer: B
NEW QUESTION # 81 
Refer to the exhibit. A wireless controller is deployed at a branch location to facilitate secure client connectivity. A network engineer configures a WLAN using 802.1X to align with company security policies.
Which configuration enables client authentication for this WLAN?
Answer: B
Explanation:
The command that enables 802.1X client authentication for this WLAN issecurity dot1x authentication-list ISE_GROUP. On a Cisco Catalyst 9800 WLC, the WLAN configuration defines Layer 2 security behavior, including whether the SSID uses 802.1X and which AAA method list is used for EAP/RADIUS authentication. Cisco documents the CLI workflow for 802.1X WLAN authentication as entering WLAN configuration mode and applyingsecurity dot1x authentication-list < authenticate-list-name > , explicitly describing this as the step to enable the authentication list for 802.1X security. Cisco's Catalyst 9800 configuration example also shows the exact formsecurity dot1x authentication-list ISE_GROUPand states that the WLAN is then configured with 802.1X authentication.
no ip mac-bindingdisables IP-to-MAC binding checks and does not select a RADIUS method list.aaa override enableallows authorization attributes from AAA/ISE to be applied after authentication, but it does not initiate
802.1X authentication.wlan branch1 policy branch1_policymaps the WLAN to a policy profile through a policy tag, but it is not the authentication command. Reference topics:802.1X WLAN security, RADIUS AAA method lists, Catalyst 9800 WLAN configuration, and secure client onboarding.
NEW QUESTION # 82
Refer to the exhibit. A retail business is deploying guest wireless across its remote branch locations. Each branch uses FlexConnect APs in local switching mode, and the central wireless LAN controller is configured with an ACL named CWA_REDIRECT. Cisco ISE is configured to return this ACL during the authentication process for central web authentication (CWA). However, when clients attempt to connect to the guest wireless LAN, they are added to the exclusion list. Which configuration step resolves the connectivity issue?
Answer: B
Explanation:
The failure is caused by the redirect ACL not being available where enforcement occurs. In FlexConnect local switching, client data-plane handling occurs on the AP, so the CWA redirect ACL cannot exist only as a controller ACL or only as a policy-profile reference. Cisco states that the redirect ACL is a punt ACL and that, for FlexConnect local switching, the ACL must be predefined on the AP because the AAA server returns only the ACL name, not the ACL definition.
The exhibit showsRedirect ACL failureandEXCLUDE_PUNT_ACL_FAIL, which aligns with an AP-side punt/redirect ACL application failure. Cisco's Catalyst 9800 CWA configuration specifically requires the redirect ACL definition to be sent through the FlexConnect profile; in the GUI this is done under the Flex ProfilePolicy ACLtab by adding the ACL, enabling central web authentication, and applying the change. The equivalent CLI iswireless profile flex < profile > followed byacl-policy < acl-name > andcentral-webauth, after which the AP uses the ACL for client redirection. AP-Join profiles do not carry client redirect ACL policy, and adding the ACL only to the policy profile does not push it to FlexConnect APs for local switching.
Reference topics:FlexConnect local switching, CWA redirect ACLs, Catalyst 9800 policy ACLs, and ISE URL-redirect authorization.
NEW QUESTION # 83
Which process is managed by Ministry of Internal Affairs and Communications in Japan?
Answer: A
Explanation:
The correct answer isRF technical standards. In Japan, wireless LAN and other radio equipment must operate under national RF regulatory requirements controlled by the Ministry of Internal Affairs and Communications, commonly referenced as MIC. TELEC, a registered certification body in Japan, states that specified radio equipment such as wireless LAN equipment used in Japan must conform to technical regulations regulated by MIC, and that radio equipment conformity certification validates conformance to the technical standards under Japan's Radio Act.
This aligns directly with Cisco wireless regulatory-domain behavior. Cisco's Catalyst 9800 country-code documentation explains that APs use legal frequencies approved for their regulatory domain, and for Japan regulatory-domain devices, Japan country codes must be configured so the controller and APs operate within permitted channel and power constraints. Cisco also states that country codes are assigned and verified on APs or wireless controllers to ensure regulatory compliance for wireless operation. Manufacturing batch inspection, customer onboarding, and supplier-chain evaluation are not RF spectrum regulatory functions.
Reference topics:RF Fundamentals - regulatory domains, country codes, channel legality, transmit-power limits, and wireless compliance.
NEW QUESTION # 84
Refer to the exhibit. An organization wants to use Cisco Spaces for location analytics, and an engineer is setting up the Cisco Catalyst 9800 WLC to send location data. The Spaces connector has already been configured and is operational on the WLC. The engineer must now configure the controller to forward telemetry data to the correct Spaces cloud endpoint using TLS to complete the integration. Which CLI command must be added to the box in the code?
Answer: D
Explanation:
The correct command is receiver ip address 198.51.100.10 57555 protocol tls-native profile spaces-profile because it matches the Cisco IOS XE model-driven telemetry subscription syntax used on Catalyst 9800 controllers. Cisco documents the receiver statement under telemetry ietf subscription as receiver ip address ip-address receiver-port protocol protocol profile name, and describes it as the command that configures the receiver IP address, port, protocol, and profile for telemetry notifications.
In the exhibit, the subscription already defines the telemetry feed: encode-tdl encoding, a native stream, the TDL URI for ewlc/wlan_config, the WLC source address, and an on-change update policy. What is missing is the collector destination. For Cisco Spaces or Catalyst Center-style integrations, the WLC must know where to export telemetry and which secure transport profile to use. Cisco troubleshooting examples for Catalyst 9800 telemetry use the same command structure: receiver ip address X.X.X.X 25103 protocol tls-native profile ... under the telemetry subscription.
Options A, B, and D are invalid because they reorder the CLI keywords. IOS XE telemetry configuration is parser-order sensitive: the command begins with receiver ip address, followed by the receiver port, then protocol, then profile.
NEW QUESTION # 85
......
In recent years, some changes are taking place in this line about the new points are being constantly tested in the 350-101 real exam. So our experts highlights the new type of questions and add updates into the 350-101 practice materials, and look for shifts closely when them take place. At the same time, as we can see that the electronic devices are changing our life day by day, our 350-101 study questions are also developed to apply all kinds of eletronic devices.
350-101 Latest Exam Test: https://www.pass4surecert.com/Cisco/350-101-practice-exam-dumps.html
BTW, DOWNLOAD part of Pass4sureCert 350-101 dumps from Cloud Storage: https://drive.google.com/open?id=1c0UgR4yH8DdLDAl7t49X9CpnlvhxOc0i