P.S. Free & New NSE6_EDR_AD-7.0 dumps are available on Google Drive shared by DumpExam: https://drive.google.com/open?id=1C91Lp9O_Z_MViV9vao0MayxinbcKG8NN
Unlike other question banks that are available on the market, our NSE6_EDR_AD-7.0 guide dumps specially proposed different versions to allow you to learn not only on paper, but also to use mobile phones to learn. This greatly improves the students' availability of fragmented time. You can choose the version of NSE6_EDR_AD-7.0 Learning Materials according to your interests and habits. And if you buy all of the three versions, the price is quite preferential and you can enjoy all of the NSE6_EDR_AD-7.0 study experiences.
| Section | Weight | Objectives |
|---|---|---|
| Monitoring and Troubleshooting | 10% | - System monitoring and health checks - Performance and issue diagnosis - Log and alert troubleshooting |
| Security Settings and Policies | 25% | - Playbooks creation and management - Communication control policies - Fortinet Cloud Service (FCS) integration - Security policies configuration |
| FortiEDR System Architecture and Deployment | 25% | - API-based management operations - Installation and deployment process - Multi-tenancy deployment - Inventory management and system tools - Architecture and technical positioning |
| Integration and Security Fabric | 15% | - FortiXDR deployment and configuration - Fortinet Security Fabric integration |
| Events, Forensics, and Threat Hunting | 25% | - Threat hunting data interpretation - Threat hunting profiles and queries - Forensic analysis and incident investigation - Security event and alert analysis |
>> Reliable NSE6_EDR_AD-7.0 Braindumps Free <<
It is understandable that different people have different preference in terms of NSE6_EDR_AD-7.0 study guide. Taking this into consideration, and in order to cater to the different requirements of people from different countries in the international market, we have prepared three kinds of versions of our NSE6_EDR_AD-7.0 Preparation questions in this website, namely, PDF version, online engine and software version, and you can choose any one version of NSE6_EDR_AD-7.0 exam questions as you like.
NEW QUESTION # 22
Refer to the exhibit.
An event exception is shown. Which two statements about the exception are true? (Choose two answers)
Answer: A,C
Explanation:
The correct answers are C and D .
The exhibit shows an exception created/updated by FortinetCloudServices after the file Update.exe was classified as Good . This aligns with the FortiEDR Cloud Service behavior described in the guide. The guide states that once FCS is connected, it can enable Tuning , which means automated security event exception
/allowlisting. After a triggered security event is reclassified as Safe, an automated cross-environment exception can be pushed downstream and the event expires, preventing it from triggering again.
Option C is correct because the Event Exceptions window includes Triggered Rules , and the guide states that when editing an exception, the administrator can modify the Collector Groups , Destinations , Users , and the pairs of rules and processes that define the exception in the Triggered Rules area.
Option D is the Fortinet/FCS-related statement supported by the guide's FCS behavior. The guide says FCS can enable follow-up actions, including Tuning through automated exceptions and Playbook Actions , and that playbook policy remediation actions are based on the final FCS determination.
Option A is wrong because the exhibit explicitly states "All the Raw Data Items are covered." A partial exception would mean not all raw data items are covered. The guide explains that if an exception does not cover all raw data items, FortiEDR displays a different indicator and distinguishes covered from non-covered raw data items.
Option B is wrong because the exception scope in the exhibit is set to All groups , All destinations , and All users . The comment references device C8092231196, but that is not the same as saying the exception applies only to that device.
=========
NEW QUESTION # 23
You find third-party software on a user's computer that does not appear in the application list on the communication control console. Which two statements are true about this situation? (Choose two answers)
Answer: C,D
Explanation:
The best answers are A and D , but be careful: A is directly verified by the guide; D is the only remaining statement that can be true in policy context, but it is weaker than A.
The FortiEDR 7.0.0 Administration Guide states that the Communication Control tab identifies communicating applications detected in the organization. More specifically, the Applications page lists "all communicating applications detected in your organization that have ever attempted to communicate." Therefore, if software exists on a user's computer but does not appear in the Communication Control application list, the most direct explanation is that it has not attempted external communication .
The guide also explains that FortiEDR Communication Control reduces the scope of administration because Security/IT only needs to handle applications that communicate externally. It also states that non-authorized applications can still execute, and only their outgoing communication is prevented. This confirms that the Communication Control application list is not a full software inventory; it is a list of applications that have communicated or attempted communication.
Option B is not correct. If an application were blocked due to FortiEDR security-policy enforcement after a connection attempt, FortiEDR would generate security-event visibility in the Incidents workflow, not simply hide the application from Communication Control. FortiEDR Collectors send communication-related data for Communication Control, and security events are sent for enforcement/monitoring purposes.
Option C is also wrong. Reputation score affects policy decisions and application risk evaluation, but it does not cause an application to be ignored or excluded from the application list. The guide says each application in the Applications page shows a reputation indicator, which proves reputation is displayed for listed applications rather than used to hide them.
For option D , if the application has never attempted communication, Communication Control has no observed communication event to list. In exam logic, this can be interpreted as the application is not currently being denied by Communication Control policies. However, the stronger technical truth is this:
Communication Control does not list installed software; it lists applications that have attempted to communicate.
=========
NEW QUESTION # 24
An employee leaves the company and no longer has access to the FortiEDR system. You must ensure GDPR compliance regarding the employee's personal data stored in FortiEDR. Which two data types must be removed to meet GDPR requirements? (Choose two answers)
Answer: B,D
Explanation:
The correct answers are A. Device and user name and D. IP address and MAC address .
The FortiEDR 7.0.0 Administration Guide states that the GDPR feature is implemented in Administration > Settings > Personal Data Handling . It is used to remove relevant data for an employee or FortiEDR user who no longer has access to or uses the FortiEDR system. The guide explicitly identifies the personal data as device name, IP address, MAC address, and user name . It further states: "You must remove all device name, IP address, MAC address, and user name data from FortiEDR in order to fully comply with the GDPR standard." Therefore, installed applications and installed OS name are not the required GDPR personal data types in this FortiEDR procedure. The required removal is performed iteratively for the employee's/user's device name , IP address , MAC address , and user name . The guide also instructs administrators to continue removing the other required data: IP address, MAC address, and user name , and to delete any reports that may contain the user's data.
NEW QUESTION # 25
A company requires a global communication policy for a FortiEDR multi-tenant environment. Which recommendation must you make? (Choose one answer)
Answer: C
Explanation:
The correct answer is A. Create a separate communication control policy for each organization .
The key point is that Communication Control is not available in Hoster view . In a FortiEDR multi-tenant environment, Hoster view is the view used to display information for all organizations together. However, the guide clearly states under the Hoster view section: "Communication Control - The Communication Control window is not available in Hoster view." That means you cannot create one global Communication Control policy from Hoster view and assign it across all organizations. Options B , C , and D all assume cross-organization/global Communication Control policy assignment, but the guide does not support that capability. The practical recommendation is to configure Communication Control policies separately inside each organization.
The guide contrasts this with Security Policies, where in Hoster view the Security Policies page displays all policies from all organizations and supports cloning a security policy from one organization to another. That statement is for Security Policies , not Communication Control policies.
=========
NEW QUESTION # 26
Refer to the exhibits.
You are attempting to move a collector into the High Security Collector Group for isolation but encounter an error in the API request as shown in the exhibit. To successfully isolate the collector, which API parameter must you correct? (Choose one answer)
Answer: A
Explanation:
The correct answer is A. Set the organization parameter to Default .
From the first exhibit, the API query result for the Collector shows:
* Collector name: Desktop-PC
* Collector group name: Engineering
* Organization: Default
* State: Running
But in the second exhibit, the API request is using:
* organization = Fortinet-Training
* collectors = Desktop-PC
* targetCollectorGroup = High Security Collector Group
That organization value is wrong. The Collector belongs to the Default organization, so the API request must reference the Collector's actual organization. Otherwise FortiEDR cannot locate or move that Collector under the organization specified in the request.
The FortiEDR guide confirms that Collector Groups are used to assign different FortiEDR policies to different Collectors, and that Collectors can be moved between groups/organizations in the Inventory workflow. In Hoster view, FortiEDR shows Collectors from all organizations and allows moving Collectors between organizations, but the organization context must match the Collector being managed.
Option B is wrong because the exhibit shows the API request is authorized; the failure is a 400 Bad Request , not an authentication failure. Option C is wrong because the endpoint shown is already a move/update operation using PUT, and the issue is not the HTTP method. Option D is wrong because Engineering is the current Collector Group. The goal is to move the Collector to High Security Collector Group , so changing the target back to Engineering would not isolate or harden the Collector.
=========
NEW QUESTION # 27
......
The price for NSE6_EDR_AD-7.0 training materials is quite reasonable, and no matter you are a student or you are an employee at school, you can afford it. NSE6_EDR_AD-7.0 exam dumps are edited by experienced experts, therefore the quality can be guaranteed. NSE6_EDR_AD-7.0 training materials contain both questions and answers, and it’s convenient for you to check the answers after finish practicing. In addition, NSE6_EDR_AD-7.0 Exam Dumps cover most knowledge points of the exam, and you can also improve your ability in the process of learning.
NSE6_EDR_AD-7.0 Upgrade Dumps: https://www.dumpexam.com/NSE6_EDR_AD-7.0-valid-torrent.html
What's more, part of that DumpExam NSE6_EDR_AD-7.0 dumps now are free: https://drive.google.com/open?id=1C91Lp9O_Z_MViV9vao0MayxinbcKG8NN