BONUS!!! Download part of PracticeTorrent NSE6_EDR_AD-7.0 dumps for free: https://drive.google.com/open?id=1x5XHKa6F7wZolXRUBKMN2kdsmxJpP68v
Our NSE6_EDR_AD-7.0 vce braindumps will boost your confidence for taking the actual test because the pass rate of our preparation materials almost reach to 98%. You can instantly download the free trial of NSE6_EDR_AD-7.0 Exam PDF and check its credibility before you decide to buy. Our NSE6_EDR_AD-7.0 free dumps are applied to all level of candidates and ensure you get high passing score in their first try.
| Section | Weight | Objectives |
|---|---|---|
| Events, Forensics, and Threat Hunting | 25% | - Threat hunting data interpretation - Threat hunting profiles and queries - Security event and alert analysis - Forensic analysis and incident investigation |
| Integration and Security Fabric | 15% | - Fortinet Security Fabric integration - FortiXDR deployment and configuration |
| Security Settings and Policies | 25% | - Fortinet Cloud Service (FCS) integration - Communication control policies - Playbooks creation and management - Security policies configuration |
| Monitoring and Troubleshooting | 10% | - System monitoring and health checks - Log and alert troubleshooting - Performance and issue diagnosis |
| FortiEDR System Architecture and Deployment | 25% | - Installation and deployment process - Inventory management and system tools - API-based management operations - Multi-tenancy deployment - Architecture and technical positioning |
>> Valid NSE6_EDR_AD-7.0 Exam Questions <<
Since the childhood, we seem to have been studying and learning seems to take part in different kinds of the purpose of the test, at the same time, we always habitually use a person's score to evaluate his ability. And our NSE6_EDR_AD-7.0 study materials can help you get better and better reviews. This is a very intuitive standard, but sometimes it is not enough comprehensive, therefore, we need to know the importance of getting the test NSE6_EDR_AD-7.0 Certification, qualification certificate for our future job and development is an important role.
NEW QUESTION # 29
Refer to the exhibits.
You are attempting to move a collector into the High Security Collector Group for isolation but encounter an error in the API request as shown in the exhibit. To successfully isolate the collector, which API parameter must you correct? (Choose one answer)
Answer: A
Explanation:
The correct answer is A. Set the organization parameter to Default .
From the first exhibit, the API query result for the Collector shows:
* Collector name: Desktop-PC
* Collector group name: Engineering
* Organization: Default
* State: Running
But in the second exhibit, the API request is using:
* organization = Fortinet-Training
* collectors = Desktop-PC
* targetCollectorGroup = High Security Collector Group
That organization value is wrong. The Collector belongs to the Default organization, so the API request must reference the Collector's actual organization. Otherwise FortiEDR cannot locate or move that Collector under the organization specified in the request.
The FortiEDR guide confirms that Collector Groups are used to assign different FortiEDR policies to different Collectors, and that Collectors can be moved between groups/organizations in the Inventory workflow. In Hoster view, FortiEDR shows Collectors from all organizations and allows moving Collectors between organizations, but the organization context must match the Collector being managed.
Option B is wrong because the exhibit shows the API request is authorized; the failure is a 400 Bad Request , not an authentication failure. Option C is wrong because the endpoint shown is already a move/update operation using PUT, and the issue is not the HTTP method. Option D is wrong because Engineering is the current Collector Group. The goal is to move the Collector to High Security Collector Group , so changing the target back to Engineering would not isolate or harden the Collector.
=========
NEW QUESTION # 30
Refer to the Exhibit:
Based on the FortiEDR status output shown in the exhibit, what are two reasons for the degraded state?
(Choose two answers)
Answer: C,D
Explanation:
The correct answers are B and C .
The exhibit shows:
FortiEDR Service: Up
FortiEDR Driver: Up
FortiEDR Status: Degraded (no configuration)
This means the local Collector service and driver are running, but the Collector has not received valid configuration. In FortiEDR, a Collector must register and communicate with the FortiEDR Aggregator to receive its configuration. The guide states that the Collector initially sends registration information to the FortiEDR Aggregator using SSL, sends ongoing health/status/security-event information, and receives its configuration from the Aggregator.
During installation, a non-customized Windows Collector requires the correct Aggregator address , Aggregator port 8081 , and registration password . The guide explicitly states that the Aggregator port should be specified as 8081 , and that the registration password must be entered during installation.
Therefore, an incorrect registration password or incorrect port number can prevent proper registration
/configuration retrieval, resulting in a degraded/no-configuration state.
Option A is not the best answer because Windows Firewall being enabled by itself does not automatically cause this FortiEDR status; only if it blocks required FortiEDR communication would it matter, and the option is too generic. Option D is also not correct as written because the Collector receives configuration from the Aggregator , not directly from the Central Manager. The guide describes Collector-to-Aggregator communication for registration and configuration.
=========
NEW QUESTION # 31
An employee leaves the company and no longer has access to the FortiEDR system. You must ensure GDPR compliance regarding the employee's personal data stored in FortiEDR. Which two data types must be removed to meet GDPR requirements? (Choose two answers)
Answer: A,D
Explanation:
The correct answers are A. Device and user name and D. IP address and MAC address .
The FortiEDR 7.0.0 Administration Guide states that the GDPR feature is implemented in Administration > Settings > Personal Data Handling . It is used to remove relevant data for an employee or FortiEDR user who no longer has access to or uses the FortiEDR system. The guide explicitly identifies the personal data as device name, IP address, MAC address, and user name . It further states: "You must remove all device name, IP address, MAC address, and user name data from FortiEDR in order to fully comply with the GDPR standard." Therefore, installed applications and installed OS name are not the required GDPR personal data types in this FortiEDR procedure. The required removal is performed iteratively for the employee's/user's device name , IP address , MAC address , and user name . The guide also instructs administrators to continue removing the other required data: IP address, MAC address, and user name , and to delete any reports that may contain the user's data.
NEW QUESTION # 32
Refer to the exhibits.
The application policy logs and application details are shown. Collector C8092231196 is a member of the Finance group. In this scenario, what must you do to block the FileZilla application? (Choose one answer)
Answer: A
Explanation:
The correct answer is B. Deny the application in the Finance policy .
The FortiEDR 7.0.0 Administration Guide states that Communication Control policies define the actions to be taken for a given application or application version . It also states that each Communication Control policy applies to specific Collector Groups , and all devices that belong to those Collector Groups follow that policy. A Collector Group can be assigned to only one Communication Control policy.
In the exhibit, the Collector C8092231196 is stated to be a member of the Finance group. Therefore, to block FileZilla for that Collector, the application action must be set to Deny under the Finance policy , because that is the policy context that applies to the Collector's group.
The guide also explains that you can modify a policy action for an application/version so that the selected application is explicitly set to Allow or Deny for the relevant policy. When modified this way, the Application
/Version Details area shows the action as manually changed and excluded from the original policy action.
Option A is wrong because assigning a Simulation Communication Control Policy to the DBA group does not affect a Collector in the Finance group. Option C is wrong because assigning the Finance policy to the DBA group would affect DBA Collectors, not the Finance Collector in the scenario. Option D is wrong because assigning the Finance policy to a broader group such as Default Collector Group is unnecessary and could over-broaden the policy impact. The precise action is to deny FileZilla in the policy that applies to the Collector's own group: Finance policy .
=========
NEW QUESTION # 33
Refer to the Exhibit:
Based on the event shown in the exhibit, which two statements about the event are true? (Choose two answers)
Answer: A,D
Explanation:
The correct answers are A and B .
The exhibit shows the event classification as Malicious , classified by FortinetCloudServices , and the history states that device R2D2-kvm63 was moved from the Training Collector Group to the High Security Collector Group . This is a Playbook action. The FortiEDR guide explains that after classification changes, the Overview pane displays the history of automatic FortiEDR actions, including Playbook policy-related actions .
The guide specifically lists Move device to High Security Group under Investigation actions in Playbook policies. It states that a checkmark in a classification column means the device is automatically moved to the High Security Collector Group when a security event with that classification is triggered. So the exhibit proves that Playbooks are configured for this event.
The second correct answer is B because the triggered rule is under Training * Extended Detection . The FortiEDR guide states that the eXtended Detection Policy logs events and displays them in the Incidents tab, but no blocking options are provided for this policy.
Option C is wrong because moving a device to the High Security Collector Group is not the same as isolating the device. Isolation would block communication to/from the affected Collector. The exhibit shows a Collector Group move, not isolation.
Option D is wrong because Extended Detection does not block. The guide explicitly says Extended Detection events are logged and displayed, with no blocking options provided.
=========
NEW QUESTION # 34
......
During the learning process on our NSE6_EDR_AD-7.0 study materials, you can contact us anytime if you encounter any problems. The staff of NSE6_EDR_AD-7.0 actual exam will be online 24 hours, hoping to solve the problem in time for you. You can contact our services via email or online, as long as you leave your message, our services will give you suggestions right away. And even you have problem when you already bought our NSE6_EDR_AD-7.0 learning guide, we will still help you solve it.
NSE6_EDR_AD-7.0 Valid Exam Labs: https://www.practicetorrent.com/NSE6_EDR_AD-7.0-practice-exam-torrent.html
BONUS!!! Download part of PracticeTorrent NSE6_EDR_AD-7.0 dumps for free: https://drive.google.com/open?id=1x5XHKa6F7wZolXRUBKMN2kdsmxJpP68v