P.S. Free & New VNX301 dumps are available on Google Drive shared by PassLeaderVCE: https://drive.google.com/open?id=1VOL4CGz8HyWX_2TJUypwWow0zs5qgdba
To get prepared for the Versa Certified SD-WAN Specialist (VNX300) certification exam, applicants face a lot of trouble if the study material is not updated. They are using outdated materials resulting in failure and loss of money and time. So to solve all these problems, PassLeaderVCE offers actual VNX301 Questions to help candidates overcome all the obstacles and difficulties they face during VNX301 examination preparation.
| Certification Vendor: | Versa Networks |
|---|---|
| Exam Name: | Versa Certified Administrator - SD-WAN Specialist |
| Exam Number: | VNX301 |
| Real Exam Qty: | 60 |
| Certificate Validity Period: | 2 years |
| Available Languages: | English |
| Passing Score: | Not officially published |
| Related Certifications: | Versa Certified SD-WAN Associate (VNX100) |
| Exam Price: | $150 USD |
| Exam Format: | Multiple Choice, Multiple Select |
| Exam Duration: | 90 minutes |
| Recommended Training: | Versa Secure SD-WAN Configuration and Administration Versa Advanced Services Training |
| Exam Registration: | Versa Academy Certification Page Kryterion Testing Services |
| Sample Questions: | Versa Networks VNX301 Sample Questions |
| Exam Way: | Online proctored or onsite testing center via Kryterion |
| Pre Condition: | Must hold Versa Certified SD-WAN Associate (VNX100); 1+ year hands-on experience recommended |
| Official Syllabus URL: | https://academy.versa-networks.com/certification-vnx300 |
>> VNX301 Question Explanations <<
Just like the old saying goes: "Practice is the only standard to testify truth", which means learning of theory ultimately serves practical application, in the same way, it is a matter of common sense that pass rate of a kind of VNX301 exam torrent is the only standard to testify weather it is effective and useful. I believe that you already have a general idea about the advantages of our Versa Certified SD-WAN Specialist (VNX300) exam question, but now I would like to show you the greatest strength of our VNX301 Guide Torrent --the highest pass rate. According to the statistics, the pass rate among our customers who prepared the exam under the guidance of our VNX301 guide torrent has reached as high as 98% to 100% with only practicing our VNX301 exam torrent for 20 to 30 hours.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
NEW QUESTION # 19
A tenant has two internet circuits and one LTE backup circuit. The forwarding profile lists the internet circuits with priority 1 and LTE with priority 2. The next-hop selection method is Load Balance. What is the expected behavior while both internet circuits are healthy?
Answer: C
Explanation:
The correct answer is A . In Versa SD-WAN forwarding profiles, next-hop priorities define which circuits are preferred. When the Load Balance next-hop selection method is used and two circuits share the same priority, sessions can be distributed across those equal-priority paths as long as they are usable and SLA- compliant. A lower priority number represents a more preferred group than a higher priority number.
Therefore, two circuits with priority 1 are preferred over LTE with priority 2 .
In this scenario, both internet circuits are healthy and both have priority 1. The VOS device should load- balance sessions across those two circuits. LTE remains available as a lower-priority backup path and would normally be considered only when the preferred internet circuits are unavailable, fail path checks, or no longer meet the applicable policy conditions.
Traffic is not replicated because replication is a separate feature and not implied by Load Balance. The branch does not drop traffic while valid paths exist. LTE is not preferred merely because its priority number is higher; in path selection, priority 1 is preferred over priority 2.
NEW QUESTION # 20
A branch using DIA with CGNAT reports that new internet sessions intermittently fail. CGNAT pool counters show increasing out-of-ports errors, while out-of-address errors remain zero. What is the most likely problem?
Answer: C
Explanation:
The correct answer is A . Versa CGNAT troubleshooting documentation includes per-pool and resource counters that show allocation behavior and failures. The counters include values such as bindings allocated, bindings freed, allocation failures, out-of-address errors, and out-of-ports errors. It also shows that CGNAT source-port resources are divided and distributed to worker threads by Versa RFD/RFM, and that allocated source-port ranges can be viewed using show rfm table src-port allocated.
If out-of-ports errors increase while out-of-address errors remain zero, the pool still has usable translated IP addresses, but the available port resource for NAT bindings is exhausted. This commonly occurs when too many concurrent sessions share a limited public IP or source-port range. The corrective action would be to expand the NAT resource, add more public translated IPs, adjust port allocation, or reduce excessive session usage.
A missing NAT IP pool would more likely produce out-of-address problems. A wrong zone match might prevent translation entirely, and OSPF in the LAN VR is unrelated to CGNAT port-resource exhaustion.
NEW QUESTION # 21
A branch has correct underlay speed and no asymmetric SD-WAN paths, but users still report packet loss during large transfers. You suspect QoS shaping is dropping traffic. Which command is most appropriate to verify interface-level CoS drops?
Answer: D
Explanation:
The correct answer is A . Versa throughput troubleshooting documentation includes a specific section titled Check that Packets Are not Dropped by CoS . It states that if a CoS shaper or rate limiter is configured on the VOS device, it may drop packets when traffic exceeds the configured shaping rate. To check whether CoS is dropping packets, Versa recommends commands including show class-of-services interfaces brief and show class-of-services interfaces detail interface-name.
The detailed interface output displays traffic statistics such as TX packets, TX packets dropped, TX bytes, TX bytes dropped, and per-traffic-class drops. This is exactly the evidence needed to confirm whether shaping or QoS enforcement is causing the observed loss.
show alarms last-n 10 may reveal major events but will not provide per-interface CoS drop counters.
show system uptime only indicates how long the system has been running. show cgnat tenants is relevant for NAT state and tenant CGNAT resources, not QoS drops.
NEW QUESTION # 22
You are configuring a CGNAT rule for branch internet access and want to verify which access-list entry will match traffic before translation. Which information is shown by the CGNAT ACL command?
Answer: B
Explanation:
The correct answer is A . Versa CGNAT troubleshooting documentation shows the command show cgnat acl info < tenant-id > for viewing CGNAT access lists used for traffic matching. The example output includes columns such as ACL handle , RuleId , Category , Precedence , VRF , Source IP , and Destination IP . It also shows tenant ID and total filters.
This command is useful when a CGNAT rule exists in configuration but sessions are not being translated. By checking the ACL output, the administrator can confirm whether the correct source prefix, destination prefix, VRF, and rule precedence are actually programmed in the dataplane. If the wrong VRF or subnet is shown, the rule may never match the intended traffic.
System uptime and CPU usage are operational health indicators. SLA metrics are SD-WAN path- quality values. BGP AS path and local preference are routing attributes. None of these directly show CGNAT access-list match programming.
NEW QUESTION # 23
A customer is running VOS Release 22.1.3 on both the speed-test client and server. Which sequence is used by the Versa speed test to calculate bandwidth?
Answer: A
Explanation:
The correct answer is C . Versa documentation states that for Releases 22.1.3 and later , the speed test factors in network latency to derive results. In these releases, the speed test is performed in three stages : a ping test, an upload test, and a download test. The ping test calculates link latency, and the speed test uses that latency data while performing the upload and download portions.
The same documentation notes that the speed test can measure bandwidth speeds up to 1 Gbps, with actual measurement depending on factors such as in-path shapers and latency. It also states that the test may use up to 45 MB of data per upload or download in the best case and 90 MB for a complete test.
Older releases behave differently. For Releases 21.2 and earlier, the speed test is performed in two stages: upload and download. Therefore, because the question specifically states Release 22.1.3 on both client and server, the correct sequence is ping, upload, and download.
NEW QUESTION # 24
......
Braindump VNX301 Pdf: https://www.passleadervce.com/Administrator-SD-WAN-Specialist/reliable-VNX301-exam-learning-guide.html
DOWNLOAD the newest PassLeaderVCE VNX301 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1VOL4CGz8HyWX_2TJUypwWow0zs5qgdba