CWNA-109 Exams Torrent–Reliable Sample Questions Answers Providers for CWNP CWNA-109: CWNP Wireless Network Administrator (CWNA)

DOWNLOAD the newest CramPDF CWNA-109 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1UhWCvBrb5rvZY9rz34WLCgjZBkatJWUJ

CramPDF's braindumps provide you the gist of the entire syllabus in a specific set of questions and answers. These study questions are most likely to appear in the actual exam. The Certification exams are actually set randomly from the database of CWNA-109. Thus most of the questions are repeated in CWNA-109 Exam and our experts after studying the previous exam have sorted out the most important questions and prepared dumps out of them. Hence CramPDF's dumps are a special feast for all the exam takers and sure to bring them not only exam success but also maximum score.

CWNP CWNA-109 Exam Syllabus Topics:

TopicDetails
Topic 1
  • Radio Frequency (RF) Technologies: This topic explains the basic features and behavior of RF. It also discusses applying the basic concepts of RF mathematics and measurement. Lastly, the topic covers RF signal characteristics and the functionality of RF antennas.
Topic 2
  • WLAN Network Architecture and Design Concepts: This topic deals with describing and implementing Power over Ethernet (PoE). Furthermore, the topic covers different wireless LAN architectures, coverage requirements, roaming considerations, and common proprietary features in wireless networks.
Topic 3
  • RF Validation and WLAN remediation: This topic covers RF interference, WLAN performance, the basic features of validation tools, and common wireless issues.

>> CWNA-109 Exams Torrent <<

CWNA-109 Sample Questions Answers | CWNA-109 Cost Effective Dumps

Firstly, our company always feedbacks our candidates with highly-qualified CWNA-109 study guide and technical excellence and continuously developing the most professional exam materials. Secondly, our CWNA-109 study materials persist in creating a modern service oriented system and strive for providing more preferential activities for your convenience. Last but not least, we have free demos for your reference, as in the following, you can download which CWNA-109 Exam Materials demo you like and make a choice. Therefore, you will love our CWNA-109 study materials!

CWNP Wireless Network Administrator (CWNA) Sample Questions (Q82-Q87):

NEW QUESTION # 82
You are troubleshooting a controller-based AP that is unable to locate the controller. DHCP is not use and the controller is located at 10.10.10.81/24 while the AP is on the 10.10.16.0/24 network. What should be inspected to verify proper configuration?

Answer: C

Explanation:
What should be inspected to verify proper configuration is DNS. DNS stands for Domain Name System and is a service that resolves hostnames to IP addresses. In a controller-based AP deployment, DNS can be used to help the AP locate the controller by using a predefined hostname such as CISCO-CAPWAP-CONTROLLER or aruba-master. The AP sends a DNS query for this hostname and receives an IP address of the controller as a response. Therefore, if DNS is not configured properly or if there is no DNS entry for the controller hostname, the AP may not be able to locate the controller. NTP, BOOTP, and AP hosts file are not relevant for this scenario. References: [CWNP Certified Wireless Network Administrator Official Study Guide: Exam CWNA-109], page 374; [CWNA: Certified Wireless Network Administrator Official Study Guide: Exam CWNA-109], page 364.


NEW QUESTION # 83
What frame type is used to reserve the wireless medium for the transmission of high data rate frames that may not be understood by all clients connected to the BSS?

Answer: C

Explanation:
The frame type that is used to reserve the wireless medium for the transmission of high data rate frames that may not be understood by all clients connected to the BSS is RTS. RTS stands for Request to Send and is a control frame that is sent by a station to request access to the medium for a specified duration. The RTS frame contains the source and destination MAC addresses, as well as a Network Allocation Vector (NAV) value that indicates how long the medium will be occupied. The destination station responds with a Clear to Send (CTS) frame that echoes the NAV value and grants permission to the source station. All other stations in the BSS hear either the RTS or CTS frame and update their NAV timers accordingly, deferring their transmissions until the medium is free. The RTS/CTS mechanism can be used to prevent hidden node problems, reduce collisions, and protect high data rate frames that use features such as 802.11n or 802.11ac that may not be compatible with legacy stations. ACK, Beacon, and PS-Poll are not used to reserve the medium for high data rate frames.


NEW QUESTION # 84
What statement is true concerning the use of Orthogonal Frequency Division Multiplexing (OFDM) modulation method in IEEE 802.11 WLANs?

Answer: B

Explanation:
OFDM is a modulation method that divides the channel bandwidth into multiple subcarriers, each carrying a single data symbol. This allows for higher data rates and more robust transmissions in multipath environments. OFDM was first introduced in the 802.11a standard, which operates in the 5 GHz band and supports data rates up to 54 Mbps. Later, the 802.11g standard adopted OFDM for the 2.4 GHz band, and the
802.11n and 802.11ac standards enhanced OFDM with features such as MIMO (Multiple Input Multiple Output), channel bonding, and higher-order modulation schemes to achieve data rates up to 600 Mbps and 6.9 Gbps, respectively. These standards are collectively known as the ERP (Extended Rate PHY), HT (High Throughput), and VHT (Very High Throughput) PHYs . References: [CWNA-109 Study Guide], Chapter 4:
Radio Frequency Signal and Antenna Concepts, page 163; [CWNA-109 Study Guide], Chapter 4: Radio Frequency Signal and Antenna Concepts, page 157.


NEW QUESTION # 85
A non-802.11 device is suspected of causing interference on the WLAN. You are not certain of the location or type of device. What is the best solution for locating this non-802.11 device?

Answer: B

Explanation:
A laptop-based spectrum analyzer with a directional antenna is the best solution for locating a non- 802.11 device that is suspected of causing interference on the WLAN. A spectrum analyzer is a device or a software application that can measure and display the frequency spectrum of electromagnetic signals in a given range. A spectrum analyzer can show the amplitude, frequency, bandwidth, modulation, and other characteristics of different signals in the spectrum, which can help identify their sources and types. A spectrum analyzer can also detect non-802.11 devices that may cause interference on the WLAN, such as microwave ovens, cordless phones, Bluetooth devices, or radar systems. A laptop-based spectrum analyzer is a software application that runs on a laptop computer and uses an external USB adapter as its RF interface. A laptop- based spectrum analyzer has the advantage of being portable, flexible, and cost-effective compared to a hardware-based spectrum analyzer. A directional antenna is an antenna that radiates or receives RF signals more strongly in one direction than in others. A directional antenna has a high gain and a narrow beamwidth, which means it can focus the RF energy in a specific direction and reduce the interference from other directions. A directional antenna can also increase the range and sensitivity of the RF signal detection. To locate a non-802.11 device that is causing interference on the WLAN, a laptop-based spectrum analyzer with a directional antenna can be used to perform a technique called RF hunting or triangulation. This technique involves pointing the directional antenna in different directions and observing the signal strength and characteristics of the interfering device on the spectrum analyzer. By moving around and changing the direction of the antenna, the location of the interfering device can be estimated based on where the signal strength is highest and most consistent.


NEW QUESTION # 86
In a split-MAC architecture, which functions are typically handled by the WLAN controller rather than the access point?

Answer: D

Explanation:
In a split-MAC architecture, MAC layer functions are divided between the access point and the WLAN controller. Time-sensitive, real-time functions such as beacon generation, frame acknowledgment, and RTS/CTS handling remain at the access point, since they require very fast response times. Centralized, non-real-time functions, such as authentication, key management, RF channel and power management, and roaming coordination, are handled by the WLAN controller. This division allows for centralized policy control while keeping latency-sensitive operations local to the AP.


NEW QUESTION # 87
......

CramPDF CWNP CWNA-109 Practice Test dumps can help you pass IT certification exam in a relaxed manner. In addition, if you first take the exam, you can use software version dumps. Because the SOFT version questions and answers completely simulate the actual exam. You can experience the feeling in the actual test in advance so that you will not feel anxious in the real exam. After you use the SOFT version, you can take your exam in a relaxed attitude which is beneficial to play your normal level.

CWNA-109 Sample Questions Answers: https://www.crampdf.com/CWNA-109-exam-prep-dumps.html

DOWNLOAD the newest CramPDF CWNA-109 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1UhWCvBrb5rvZY9rz34WLCgjZBkatJWUJ