Important Tips to Pass Cisco 800-150 Exam Quickly

DOWNLOAD the newest DumpsFree 800-150 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1BzZ-ZdF0ajuRCSLQBeidSQjP6cEkfoMw

Once you have used our 800-150 exam training in a network environment, you no longer need an internet connection the next time you use it, and you can choose to use 800-150 exam training at your own right. Our 800-150 Exam Training do not limit the equipment, do not worry about the network, this will reduce you many learning obstacles, as long as you want to use 800-150 test guide, you can enter the learning state.

Cisco 800-150 Exam Syllabus Topics:

TopicDetails
Topic 1
  • Cisco Infrastructure and Collaboration Infrastructure: This section of the exam measures the skills of a Collaboration Engineer and focuses on Cisco infrastructure devices, endpoints, and collaboration technologies. It introduces network devices, collaboration endpoints like IP phones and video systems, and explains on-premises collaboration deployments using tools like Cisco Unified Communications Manager. It also covers how video systems integrate into collaboration environments and highlights Cisco’s cloud services for enterprise communication, including Webex Meetings, Webex Teams, and hosted collaboration solutions.
Topic 2
  • Common Service Tasks and Tools: This section of the exam measures the skills of a Technical Support Engineer and focuses on tasks commonly needed to manage Cisco devices. It explains how devices boot up, introduces common Cisco IOS commands, and identifies tools for file management. It shows how to confirm physical connections, remotely access devices, and connect to the console port. It also covers how to capture the status of a device, recover passwords, and replace devices by using proper tools. Students are also taught how to find serial numbers on Cisco equipment to assist with support and maintenance activities.
Topic 3
  • Cisco Hardware Replacement: This section of the exam measures the skills of a Technical Support Engineer and teaches how to safely and correctly replace Cisco hardware. It explains safety procedures such as creating safe work zones and handling electrostatic discharge. Students learn the step-by-step processes to replace a wide range of Cisco devices, from switches and routers to firewalls, UCS servers, and collaboration endpoints. It also covers configuring Cisco NX-OS software, including understanding operating modes, boot procedures, and password recovery, and introduces Cisco collaboration endpoint solutions like IP phones and video systems.
Topic 4
  • Cisco Software: This section of the exam measures the skills of a Network Engineer and discusses Cisco’s software systems and licensing. It explains the difference between IOS install and bundle modes and gives an overview of different licensing models. Students learn how to manage Cisco software images, including backing up, transferring, and installing images via FTP, TFTP, or USB. It also covers how to handle configuration files to keep devices running properly and ensure smooth upgrades or replacements.

>> New 800-150 Exam Preparation <<

800-150 exam guide & 800-150 Real dumps & 800-150 free file

Our online staff is professionally trained and they have great knowledge on the 800-150 study guide. So they can clearly understand your requirements and ideas and then help you make the right choices. When you have purchased our 800-150 exam practice, but you do not know how to install it, we can also provide remote guidance to help you complete the installation. All in all, we will always be there to help you until you pass the 800-150 Exam and get a certificate.

Cisco Supporting Cisco Devices for Field Technicians Sample Questions (Q36-Q41):

NEW QUESTION # 36
Which common CLI command isused to install Cisco NX-OS Software?

Answer: D

Explanation:
Theinstall allcommand is the standard method used to install or upgrade Cisco NX-OS software on Nexus switches. This command streamlines the installation process by automating tasks such as verifying the software image, checking for compatibility, and managing the installation of optional packages or SMUs (Software Maintenance Upgrades). It ensures a comprehensive and efficient upgrade process, minimizing the potential for errors.Cisco In contrast:
* copy tftp: running-configis used to copy configuration files, not software images.
* install kickstartis an outdated command from earlier NX-OS versions.
* boot systemsets the boot variable but does not handle the full installation process.
Reference:Supporting Cisco Devices for Field Technicians (FLDTEC) - Cisco IOS Software Basics


NEW QUESTION # 37
Which two configuration parameters are most critical to ensure optimal performance when configuring a network port for a newly installed IP phone in an enterprise environment? (Choose two.)

Answer: A,B

Explanation:
When configuring a network port for a newly installed IP phone, two critical parameters to ensure optimal performance are:
VLAN Assignment: Assigning the correct VLANs is essential for segregating voice and data traffic. Typically, a separate voice VLAN is configured to prioritize voice traffic and enhance security.
Power over Ethernet (PoE): PoE allows the switch to supply power to the IP phone over the same Ethernet cable used for data transmission. This eliminates the need for separate power supplies and simplifies installation.
While QoS classification (Option E) is important for prioritizing voice traffic, it is typically configured at a broader network level. Link aggregation (Option B) and Spanning Tree Protocol (Option C) are more relevant to network redundancy and loop prevention, respectively, and are not directly critical for the initial configuration of an IP phone port.
Reference:
===


NEW QUESTION # 38
Which command is used to copy the startup configuration of a device to a USB file system when transferring files to a Cisco device?

Answer: C

Explanation:
To back up the startup configuration of a Cisco device to a USB drive, the commandcopy startup-config usbflash0:[filename]is used. This command copies the contents of the startup configuration file stored in NVRAM to a specified file on the USB flash drive. This is particularly useful for creating backups before performing upgrades or replacements.Option A:Copies the startup configuration to a TFTP server, not a USB drive.
* Option B:Attempts to copy from the USB drive to the startup configuration, which is the reverse of the desired operation.
* Option D:Copies the running configuration, not the startup configuration, to the USB drive.
Reference:Supporting Cisco Devices for Field Technicians (FLDTEC) - Maintenance and RMA Procedures


NEW QUESTION # 39
What is the primary role of a switch in a local area network?

Answer: A

Explanation:
In a local area network (LAN), the primary function of a switch is to operate at Layer 2 (Data Link Layer) of the OSI model. Switches use MAC addresses to forward frames to the appropriate destination ports. This targeted forwarding mechanism divides the network into separate collision domains for each switch port. By isolating collision domains, switches significantly reduce the chance of collisions, enhancing the performance and efficiency of the network.
Unlike hubs, which forward all traffic to all ports (thus creating a single collision domain), switches intelligently forward only the necessary traffic to the correct port. This capability allows multiple simultaneous conversations on different switch ports without interference.
Routers, which operate at Layer 3 (Network Layer), are used to route packets between different networks, not within the same LAN. Wireless connectivity is provided by wireless access points (WAPs), not switches. Encryption is typically handled by security protocols or devices such as firewalls and not by switches directly.


NEW QUESTION # 40
Drag and drop the Cisco collaboration endpoints from the left onto the corresponding descriptions on the right.

Answer:

Explanation:


NEW QUESTION # 41
......

To be well-prepared, you require trust worthy and reliable DumpsFree practice material. You also require accurate DumpsFree study material to polish your capabilities and improve your chances of passing the 800-150 certification exam. DumpsFree facilitates your study with updated Cisco 800-150 Exam Dumps. This 800-150 exam prep material has been prepared under the expert surveillance of 90,000 highly experienced DumpsFree professionals worldwide.

Reliable 800-150 Test Tutorial: https://www.dumpsfree.com/800-150-valid-exam.html

What's more, part of that DumpsFree 800-150 dumps now are free: https://drive.google.com/open?id=1BzZ-ZdF0ajuRCSLQBeidSQjP6cEkfoMw