What's more, part of that PracticeDump NSEI_OTS_AR-7.6 dumps now are free: https://drive.google.com/open?id=1j8Jt8ShRHfOYblKUk_CMgKHmXBVAohhP
If you have interests with our NSEI_OTS_AR-7.6 practice materials, we prefer to tell that we have contacted with many former buyers of our NSEI_OTS_AR-7.6 exam questions and they all talked about the importance of effective NSEI_OTS_AR-7.6 practice material playing a crucial role in your preparation process. Our practice materials keep exam candidates motivated and efficient with useful content based wholly on the real NSEI_OTS_AR-7.6 Guide materials.
| Section | Weight | Objectives |
|---|---|---|
| Asset Management | 25% | - Fortinet Security Fabric for OT environments - OT security standards and compliance (IEC 62443, NIST) - Device detection and inventory using FortiGate & FortiNAC |
| Network Access Control | 25% | - OT Ethernet and industrial communication models - Authentication and access policies for OT devices - Purdue Model and secure network segmentation |
| Network Security | 25% | - Deep inspection for industrial protocols (Modbus, DNP3, OPC) - Security automation and threat response - Virtual patching for legacy OT systems |
| Monitoring and Risk Assessment | 25% | - Event handling and logging with FortiAnalyzer 7.6 - OT-focused risk assessment and management - Threat detection using FortiSIEM 7.4 |
>> NSEI_OTS_AR-7.6 Pdf Files <<
Unfortunately, many candidates don't pass the NSEI_OTS_AR-7.6 exam because they rely on outdated Fortinet NSE I - OT Security 7.6 Architect exam preparation material. Failure leads to anxiety and money loss. You can avoid this situation with PracticeDump that provides you with the most reliable and actual Fortinet NSEI_OTS_AR-7.6 Dumps with their real answers for NSEI_OTS_AR-7.6 exam preparation. This NSEI_OTS_AR-7.6 exam material contains all kinds of actual Fortinet NSE I - OT Security 7.6 Architect exam questions and practice tests to help you to ace your exam on the first attempt.
NEW QUESTION # 32
You would like to customize your current FortiAnalyzer report to provide a better risk assessment of your OT network. Which two options can you use to enhance your report? (Choose two answers)
Answer: C,D
Explanation:
The correct answers are B. The Datasets library and D. The Chart library .
The study guide explains that a FortiAnalyzer report is built from charts, and that charts consist of two elements: datasets and format . It states: "A FortiAnalyzer report is a set of data organized in charts" and "Charts consist of two elements: Datasets ... and Format." It then goes further in the Customizing Reports section and explicitly says "By default, the Chart Library contains more than 300 charts" and
"By default, the Datasets library contains almost 400 datasets." It also states that you can clone and edit both charts and datasets, and create new ones , which is exactly how you enhance and customize an existing report.
The other options are not the best answers for this question. FortiView can export a chart into a report chart, and Log View can help build a custom dataset and chart from search results, but the question asks which options you can use to enhance the report itself. The study guide identifies the actual report-customization components as the Chart Library and Datasets library . Dashboard library is not presented as a FortiAnalyzer report customization library in this section.
NEW QUESTION # 33
Refer to the exhibit.
A partial OT network is shown. You want to provide the supervisor with secure remote access. Which two features can you implement on Edge-FortiGate ? (Choose two answers)
Answer: A,C
Explanation:
Based on the exhibit and the OT Security 7.6 Architect standards for Secure Remote Access :
* Secure Tunneling (Statement A) : The exhibit shows a Remote PC connecting through a VPN Cloud to the Edge-FortiGate . In the Fortinet architecture, IPsec VPN is the primary method for establishing a secure, encrypted tunnel for remote administrators or supervisors to access the internal OT segments (Level 2/3) from an external location.
* Multi-Factor Authentication (Statement B) : Secure remote access in OT environments (aligned with IEC 62443 standards) requires strong authentication. The study guide emphasizes the use of FortiToken to provide Two-Factor Authentication (2FA) for VPN users, ensuring that compromised credentials alone are not enough to gain access to critical infrastructure.
* FSSO (Statement D) : Fortinet Single Sign-On is generally used for identifying internal users already on the network to apply identity-based policies; it is not the primary mechanism for establishing the remote connection itself.
* SD-WAN (Statement C) : While SD-WAN can manage the path of the VPN traffic, it is a WAN optimization and reliability feature, not a " secure remote access " feature for a supervisor in the context of authentication and encryption.
NEW QUESTION # 34
Refer to the exhibits.
A partial view of the Playbook Monitor page and the corresponding playbook configuration are shown.
Based on the monitor page and the configuration of the playbook, what has triggered the Run_Report task?
(Choose one answer)
Answer: D
Explanation:
Based on the provided exhibits from the FortiAnalyzer playbook engine:
* Playbook Trigger Condition : The Partial Playbook configuration exhibit shows that the playbook is set to trigger based on a condition where the Basic Handler Name is Equal To IPS_Attack_Handling.
* Event vs. Log : In FortiAnalyzer, the field Basic Handler Name is a property of an Event record, indicating the specific Event Handler that generated it. A playbook configured with this condition is triggered by an Event , not directly by a raw log.
* Playbook Execution Flow : The Partial Playbook Monitor view shows the execution sequence:
* Event_Trigger (Starter) : This is the entry point of the playbook, which matches the condition defined in the configuration.
* IPS_Attack_Incident : The first task executed after the trigger.
* Run_Report : The task in question, which is executed as part of the automated workflow initiated by the starter.
* Conclusion : Since the playbook ' s " Starter " is defined by the IPS_Attack_Handling handler name, an event produced by that handler is the root trigger for the entire playbook execution, including the Run_Report task.
Therefore, the Run_Report task was triggered (as part of the playbook) by an IPS_Attack_Handling event .
NEW QUESTION # 35
Refer to the exhibit.
A firewall policy page is shown. To improve the security of your OT network, you have configured a Supervisor profile in the firewall policies, as shown in the exhibit. However, a supervisor is reporting that he cannot ping PLC-1. What are the two reasons? (Choose two answers)
Answer: A,B
Explanation:
The correct answers are A and C .
Option A is correct because the study guide explains that with active authentication , FortiGate prompts the user only when they use "an acceptable login protocol." It states: "When you use only active authentication, if all possible policies that could match the source IP address have authentication enabled, then the user will receive a login prompt (assuming they use an acceptable login protocol)." A direct ping to PLC-1 uses ICMP , which is not the kind of login protocol used to trigger user authentication.
So the supervisor must first authenticate through a protocol such as HTTPS or Telnet , then the ICMP traffic can match the authenticated policy.
Option C is also correct because the exhibit shows policy ID 8 greyed out, meaning it is not enabled. That policy appears above the Supervisor_access (9) policy and allows broader access to PLC-1 , whereas policy 9 is limited to ALL_ICMP . The study guide explains that "Because the user has not yet authenticated, the user group aspect of the traffic does not match" and FortiGate continues searching for another complete match. In this case, with policy 8 disabled, the supervisor is left with only the ICMP rule, which cannot be used to perform the initial login step needed for active authentication.
Option B is not supported by the exhibit. Option D is incorrect because auth-on-demand always would force authentication prompts more aggressively, but the core problem here is that the user is trying to start with ICMP and the broader policy that could permit the initial authenticated access is disabled.
NEW QUESTION # 36
Refer to the exhibit.
A FortiAnalyzer report is shown.
You must extract relevant information provided by the report regarding your OT network.
Which two statements are correct? (Choose two.)
Answer: A,C
Explanation:
The correct answers are B and C . The exhibit ' s Top Threat section identifies the IPS threats as Blocked , directly confirming that the attacks were prevented rather than merely detected. The OT Traffic table also shows destination port 502 . Modbus/TCP conventionally operates on TCP port 502, and the OT Security 7.6 study guide identifies Modbus as an industrial protocol supported and inspected by Fortinet OT security controls. The report does not cover only one day; its displayed timeline spans multiple dates, from approximately October 30 through November 3. Option D is also inconsistent with the report because the visible OT destination addresses are associated with the 192.168.x.x networks rather than 10.1.5.1.
FortiAnalyzer reports summarize logged information into charts and tables specifically to expose traffic patterns, threats, and OT activity such as this.
NEW QUESTION # 37
......
According to the survey, the average pass rate of our candidates has reached 99%. High passing rate must be the key factor for choosing, which is also one of the advantages of our NSEI_OTS_AR-7.6 real study dumps. Our NSEI_OTS_AR-7.6 exam questions have been widely acclaimed among our customers, and the good reputation in industry prove that choosing our study materials would be the best way for you, and help you gain the NSEI_OTS_AR-7.6 Certification successfully. With about ten years’ research and development we still keep updating our NSEI_OTS_AR-7.6 prep guide, in order to grasp knowledge points in accordance with the exam, thus your study process would targeted and efficient.
Valid NSEI_OTS_AR-7.6 Learning Materials: https://www.practicedump.com/NSEI_OTS_AR-7.6_actualtests.html
BONUS!!! Download part of PracticeDump NSEI_OTS_AR-7.6 dumps for free: https://drive.google.com/open?id=1j8Jt8ShRHfOYblKUk_CMgKHmXBVAohhP