P.S. Free & New NS0-185 dumps are available on Google Drive shared by Prep4pass: https://drive.google.com/open?id=1-olSzjaQ4JiM4cM7WFk-zhRmRB37WM3S
You can pass your Network Appliance NS0-185 certification exam in less time, without wasting time and money on outdated or unreliable NetApp Storage Installation Engineer, ONTAP Professional Exam (NS0-185) exam study materials. Don't let fear or a lack of resources hold you back from achieving your goals, trust Prep4pass NetApp Storage Installation Engineer, ONTAP Professional Exam (NS0-185) practice test material and achieve the highest marks in your NetApp Storage Installation Engineer, ONTAP Professional Exam (NS0-185) exam.
| Section | Weight | Objectives |
|---|---|---|
| Basic Installation Topics and Tools | 17% | - Physical cabling of ONTAP nodes
|
| ONTAP Switches | 15% | - Cluster switch software installation and configuration - Switched cluster cabling - Switch management and troubleshooting |
| ONTAP Concepts | 20% | - Storage efficiency features - ONTAP version updates and upgrades - ONTAP cluster components and architecture - Aggregate creation and cluster expansion |
| Customer Handoff | 10% | - Installation validation and testing - Operational guidance and training - Documentation creation and handover |
| ONTAP Networking | 18% | - Network redundancy and high availability - Network types and configurations - LIF creation and management - DNS, NTP and service configuration |
| ONTAP Configuration | 20% | - Troubleshooting and support tools - Security hardening and access control - Cluster peering setup - Node addition and removal |
>> Latest NS0-185 Test Camp <<
In order to better meet users' needs, our NS0-185 study materials have set up a complete set of service system, so that users can enjoy our professional one-stop service. We not only in the pre-sale for users provide free demo, when buy the user can choose in we provide in the three versions, at the same time, our NS0-185 Study Materials also provides 24-hour after-sales service, even if you are failing the exam, don't pass the exam, the user may also demand a full refund with purchase vouchers, make the best use of the test data, not for the user to increase the economic burden.
NEW QUESTION # 89
Click the Exhibit button. After installation of a new ONTAP cluster, you experience a problem.
You successfully create a support case on the NetApp Support site. The customer asks you how to view the status of the case. Referring to the exhibit, which two steps would allow the customer to accomplish this task? (Choose two.)
Answer: A,D
Explanation:
Reference: https://mysupport.netapp.com/site/info/find-support
NEW QUESTION # 90
After the installation of a new ONTAP 9.8 cluster, you have to verify if AutoSupport works. In this scenario, which two commands would you use to accomplish this task? (Choose two.)
Answer: C,D
Explanation:
https://docs.netapp.com/us-en/ontap-cli-93/system-node-autosupport-history- show.html#description
NEW QUESTION # 91
After you install an AFF A700 2-node cluster with DS224C shelves, Config Advisor reports that your SAS cabling is in mixed-path HA. You expected the SAS cabling be in quad-path HA.
You physically verify the LED status on the controllers and the shelves and notice no irregularities. However, a reboot of the SAS expander does not change the output.
In this scenario, what should you do next?
Answer: B
Explanation:
This is a post-install validation and troubleshooting scenario for SAS shelf cabling. ONTAP hardware installation guidance distinguishes betweenmultipath/tri-pathandquad-pathconfigurations based on how shelves are cabled. For shelves with IOM12/IOM12B modules, quad-path configurations requiredouble-wide shelf-to-shelf connectivity: first using the standard connections (IOM ports 3 and 1) and then adding double- wide connections (IOM ports 4 and 2). If quad-path HA is intended but Config Advisor reportsmixed-path HA, then ONTAP's view of the end-to-end SAS topology does not match the expected double-wide design.
The question states LEDs look normal and rebooting the SAS expander did not change the status. That reduces the likelihood of a transient expander condition and shifts focus tophysical seating/connection integrity. In installation practice, a common next corrective step is tore-seat the SAS I/O modules(IOMs on the shelf side or SAS modules/adapters on the controller side depending on platform architecture). Reseating is a controlled, practical action to address partial lane connectivity, marginal contacts, or module insertion issues that can still present as "connected" at an LED level but result in ONTAP detecting fewer active paths than expected.
Option D is incorrect because multipath HA is not "the only" supported method on such platforms; ONTAP documentation explicitly describes quad-path ("double-wide") cabling rules and steps. Option B (disconnect and rerun Config Advisor) is destructive and does not correct the underlying condition; it is more of a diagnostic reset than a validated next fix step, and it risks creating additional variables. Option A (open a case and power off shelves) is premature given there is a clear, standard physical remediation action remaining.
Therefore, the correct next step is tore-seat the SAS IO modulesof the affected controller.
NEW QUESTION # 92
You have a 4-node ONTAP 9.8 cluster with a FAS8700 HA pair that serves iSCSI LUNs. You are adding a new AFF A250 HA pair to the cluster with new iSCSI SAN LIFs. You need to allow non-optimized data paths from the AFF A250 nodes to the existing LUNs on the FAS8700 nodes.
In this scenario, which two ONTAP configuration settings must you verify? (Choose two.)
Answer: A,D
Explanation:
This scenario is about iSCSI SAN path visibility after cluster expansion. ONTAP usesSelective LUN Map (SLM)concepts so that hosts do not automatically see every LUN through every node, which would create unnecessary paths. ONTAP documentation explains that with SLM, when a LUN map is created, the LUN is accessible through paths on the node that owns the LUN and its HA partner, and this behavior is controlled through thereporting-nodeslist.
If you wantadditional paths(including non-optimized paths) from newly added nodes, you must ensure the new nodes can be included in the reporting scope for those LUN mappings. ONTAP provides an explicit mechanism for this: the lun mapping add-reporting-nodes command is used before or after data mobility events to add nodes to the reporting-nodes list for a LUN mapping. This directly matches optionC (reporting nodes).
However, even if reporting-nodes is expanded, hosts only gain usable iSCSI access if the target LIFs are reachable/allowed. ONTAP documentation describes thatportsetscan be used with SLM to further restrict access, and when using SLM with portsets, LUNs are accessible on the set of LIFs included in the portset (on the owning node and its HA partner). Therefore, to "allow non-optimized paths from the AFF A250 nodes," you must verify whether portsets are being used and that the appropriate new iSCSI LIFs are included (or that no restrictive portset blocks them). That makes optionA (port sets)the second correct configuration item.
Option B (switch zoning) applies to FC fabrics, not iSCSI. Option D (failover groups) affects NAS
/management LIF failover behavior and does not control SAN LUN reporting visibility in the way SLM
/reporting-nodes and portsets do.
NEW QUESTION # 93
You are assigned to install two DS2246 shelves, three DS4243 shelves, and one DS4486 shelf.
How many rack units (U space) should you account for in this rack layout?
Answer: B
Explanation:
NetApp rack unit (U) sizing is defined per shelf model:
* DS2246 = 2U each # 2 × 2U = 4U
* DS4243 = 4U each # 3 × 4U = 12U
* DS4486 = 4U # 4U
Total:4U + 12U + 4U = 20U
Therefore, the correct answer is20U.
NEW QUESTION # 94
......
The Prep4pass is a leading and trusted platform that has been assisting the NS0-185 exam candidates since its beginning. Over this long time period, Prep4pass has helped countless candidates in their preparation and enabled them to pass the final NS0-185 Exam easily. The Prep4pass offers real, valid, and updated Network Appliance Exam Questions.
NS0-185 Excellect Pass Rate: https://www.prep4pass.com/NS0-185_exam-braindumps.html
2026 Latest Prep4pass NS0-185 PDF Dumps and NS0-185 Exam Engine Free Share: https://drive.google.com/open?id=1-olSzjaQ4JiM4cM7WFk-zhRmRB37WM3S