Itcertkr의Fortinet NSE6_FNC_AD-7.6시험자료의 문제와 답이 실제시험의 문제와 답과 아주 비슷합니다. 우리의 짧은 학습가이드로 빠른 시일 내에 관련지식을 터득하여 응시준비를 하게 합니다. 우리는 우리의Fortinet NSE6_FNC_AD-7.6인증시험덤프로 시험패스를 보장합니다.
| Section | Objectives |
|---|---|
| Deployment and Provisioning | - Configure access control on FortiNAC-F - Configure and monitor high availability (HA) - Configure FortiNAC-F security policies - Configure security automation |
| Network Visibility and Monitoring | - Use logging options available on FortiNAC - Troubleshoot network devices and device status - Explain and configure device profiling - Guests and contractors |
| Concepts and Initial Configuration | - Explain isolation networks and the configuration wizard - Model and organize infrastructure devices |
| Integration | - Integrate with third-party devices using Syslog and SNMP trap input - Configure and use FortiNAC-F Manager - Explain and configure MDM integration |
거침없이 발전해나가는 IT업계에서 자신만의 자리를 동요하지 않고 단단히 지킬려면Fortinet인증 NSE6_FNC_AD-7.6시험은 무조건 패스해야 합니다. 하지만Fortinet인증 NSE6_FNC_AD-7.6시험패스는 하늘에 별따기 만큼 어렵습니다. 시험이 영어로 출제되어 공부자료 마련도 좀 힘든편입니다. 여러분들의 고민을 덜어드리기 위해Itcertkr에서는Fortinet인증 NSE6_FNC_AD-7.6시험의 영어버전 실제문제를 연구하여 실제시험에 대비한 영어버전Fortinet인증 NSE6_FNC_AD-7.6덤프를 출시하였습니다.전문적인 시험대비자료이기에 다른 공부자료는 필요없이Itcertkr에서 제공해드리는Fortinet인증 NSE6_FNC_AD-7.6영어버전덤프만 공부하시면 자격증을 딸수 있습니다.
질문 # 26
Which two requirements must be met to set up an N+1 HA cluster? (Choose two.)
정답：A,B
설명：
TheN+1 High Availability (HA)architecture was introduced in FortiNAC-F version 7.6 to provide a more scalable and flexible redundancy model compared to the traditional 1+1 active/passive setup. In an N+1 configuration, a single secondary (standby) appliance can provide coverage for multiple primary (active) Control and Application (CA) appliances.
To set up an N+1 HA cluster, there are two fundamental structural requirements:
A FortiNAC-F Manager (FortiNAC-M):Unlike standard 1+1 HA, which can be configured directly between two CAs, N+1 management is centralized. The FortiNAC-M acts as the orchestrator that manages the failover groups, monitors the health of the primaries, and coordinates the promotion of the secondary server if a primary fails.
A FortiNAC-F device designated as a Secondary:The cluster must have one appliance explicitly configured with theSecondary failover role. This device remains in a standby state, receiving database replications from all N primaries in its group until it is called upon to take over the functions of a failed unit.
While a cluster can support multiple primaries (D), it does not strictly require " at least two " to function as an N+1 group; it simply requires N primaries (where N # 1). Additionally, N+1 is typically a Layer 3 managed solution via the Manager, meaning it does not mandate a " dedicated VLAN " for synchronization like some Layer 2 HA deployments.
" In FortiNAC-F 7.6,FortiNAC-Mfunctions as a manager to manage the N+1 Failover Groups... enabling N+M high availability for CAs. To create an N+1 Failover group, you should add thesecondary CAto the FortiNAC-M first, then add the primary CAs. The secondary CA is designed to take over the functionality of any single failed primary component. " -FortiNAC-F 7.6.0 N+1 Failover Reference Manual.
질문 # 27
Two FortiNAC-F devices have been configured as a 1+1 HA pair. The primary server went offline and a successful failover to the secondary has occurred.
What happens if the primary server comes back online?
정답：C
설명：
In a 1+1 HA configuration, once failover has occurred and the secondary assumes control, it remains the active controller when the original primary comes back online. The restored primary rejoins as the standby unit, and control is not automatically reverted.
질문 # 28
Two FortiNAC-F devices have been configured as a 1+1 HA pair. The primary server went offline and a successful failover to the secondary has occurred.
What happens if the primary server comes back online?
정답：C
설명：
In a 1+1 HA configuration, once failover has occurred and the secondary assumes control, it remains the active controller when the original primary comes back online. The restored primary rejoins as the standby unit, and control is not automatically reverted.
질문 # 29
As part of a FortiNAC-F integration with FortiGate for management of VPN users, what must be configured on FortiGate to keep FortiNAC-F up to date with VPN session information?
정답：A
설명：
The correct answer is D . For FortiGate VPN integration, FortiNAC-F depends on syslog from FortiGate to receive VPN user, IP address, and session information. The FortiNAC-F study guide states that after a remote user successfully authenticates and establishes a VPN connection, FortiGate sends user, IP, and session information to FortiNAC-F using syslog. This keeps FortiNAC-F aware of the VPN session so it can apply the correct access control state and update FortiGate when the device becomes trusted.
Option A is wrong because SNMP traps are commonly used for infrastructure events, link traps, or third-party event inputs, but this VPN workflow uses FortiGate syslog. Option B is wrong because RADIUS accounting can update session information in some NAC workflows, but the FortiGate VPN integration described in the guide uses syslog. Option C is wrong because Security Fabric integration is not the required mechanism for keeping FortiNAC-F updated with VPN session details in this scenario.
질문 # 30
Refer to the exhibits.
What would happen if the highlighted port with connected hosts was placed in both the Forced Registration and Forced Remediation port groups?
정답：A
설명：
A FortiNAC-F port can belong to both Forced Registration and Forced Remediation system groups .
These enforcement groups are not mutually exclusive and are not evaluated according to a ranking between the groups. Instead, FortiNAC-F determines the applicable enforcement according to the state of each host connected through that point of connection .
The Study Guide explicitly demonstrates overlapping enforcement membership: all Building 1 ports are members of Forced Registration , while second- and third-floor ports are additionally members of Forced Remediation .
FortiNAC-F then applies state-specific logic:
* A rogue/unregistered host on the port satisfies Forced Registration and is moved to the Registration isolation network.
* An at-risk host on the same port satisfies Forced Remediation and is moved to the Quarantine
/Remediation isolation network.
The exhibit is particularly relevant because the highlighted port shows Multiple Hosts connected. Each host is evaluated independently according to its state, so different enforcement mechanisms can apply to different endpoints sharing that port.
Therefore, placing the port in both groups enables both types of enforcement , depending on the state of the connected hosts.
Study Guide Reference: State-Based Control # System Groups; Logic to Determine Isolation; Non-Normal Status Device Evaluation , pp. 212-214 .
Top of Form
Bottom of Form
질문 # 31
......
Fortinet인증 NSE6_FNC_AD-7.6시험을 준비하기 위해 잠도 설쳐가면서 많이 힘들죠? Itcertkr덤프가 고객님의 곁을 지켜드립니다. Itcertkr에서 제공해드리는Fortinet인증 NSE6_FNC_AD-7.6덤프는 실제Fortinet인증 NSE6_FNC_AD-7.6시험문제를 연구하여 만든 공부자료이기에 최고의 품질을 자랑합니다. Itcertkr덤프를 열심히 공부하여 멋진 IT전문가의 꿈을 이루세요.
NSE6_FNC_AD-7.6완벽한 덤프: https://www.itcertkr.com/NSE6_FNC_AD-7.6_exam.html