JN0-364 Latest Mock Exam - New JN0-364 Exam Dumps

What's more, part of that itPass4sure JN0-364 dumps now are free: https://drive.google.com/open?id=1JRnxPnAkkXUHh70gcyQvLmI4lyfTwq0s

The one badge of JN0-364 certificate will increase your earnings and push you forward to achieve your career objectives. Are you ready to accept this challenge? Looking for the simple and easiest way to pass the JN0-364 certification exam? If your answer is yes then you do not need to get worried. Just visit the Juniper JN0-364 Pdf Dumps and explore the top features of JN0-364 test questions. If you feel that Service Provider Routing and Switching, Specialist (JNCIS-SP) JN0-364 exam questions can be helpful in exam preparation then download Service Provider Routing and Switching, Specialist (JNCIS-SP) JN0-364 updated questions and start preparation right now.

Juniper JN0-364 Exam Syllabus Topics:

SectionWeightObjectives
Open Shortest Path First (OSPF)15-20%- LSA types and operation
- Link-state database
- Areas and router types
- Configuration and troubleshooting
Spanning Tree Protocols8-12%- BPDU and protection features
- Configuration and convergence
- Port roles and states
- STP, RSTP, MSTP, VSTP
High Availability5-8%- Nonstop active routing
- NSR and GRES concepts
- Graceful restart
Protocol-Independent Routing10-15%- Static, aggregate, and generated routes
- Martian addresses
- Filter-based forwarding
- Routing instances and RIB groups
- Load balancing
Intermediate System to Intermediate System (IS-IS)10-15%- Configuration and monitoring
- PDUs and TLVs
- Adjacencies and levels
- Metrics and wide metrics
Multiprotocol Label Switching (MPLS)12-18%- Terminology and forwarding
- LDP and RSVP
- Segment routing basics
- Labels and LIB
- Configuration and monitoring
Border Gateway Protocol (BGP)20-25%- IBGP and EBGP
- Basic operation and message types
- Policy and route filtering
- Path selection and attributes
- Configuration and troubleshooting
Layer 2 Bridging and VLANs8-12%- Bridging concepts
- Service provider switching features
- VLANs and trunking
IPv68-12%- Address types and format
- Static and dynamic routing
- Autoconfiguration
- OSPFv3 and BGP for IPv6
Tunnels5-8%- GRE and IP-IP tunnels
- Tunnel configuration and usage

>> JN0-364 Latest Mock Exam <<

New JN0-364 Exam Dumps | JN0-364 Latest Real Test

A free trial service is provided for all customers by our JN0-364 study quiz, whose purpose is to allow customers to understand our products in depth before purchase. Many students often complain that they cannot purchase counseling materials suitable for themselves. A lot of that stuff was thrown away as soon as it came back. However, you will definitely not encounter such a problem when you purchase JN0-364 Preparation questions. We have free demos of the JN0-364 exam questions to download.

Juniper Service Provider Routing and Switching, Specialist (JNCIS-SP) Sample Questions (Q130-Q135):

NEW QUESTION # 130
Which configuration selling prohibits a static route from being redistributed by a dynamic routing protocol?

Answer: C

Explanation:
The no-readvertise policy statement is used to prevent a static route from being redistributed into a dynamic routing protocol. This setting ensures that routes that are configured statically are not advertised out via dynamic routing protocols such as OSPF or BGP.


NEW QUESTION # 131
Which feature allows Junos OS to perform recursive lookups for static route next hops?

Answer: A

Explanation:
In standard routing, astatic routeis typically considered valid only if the specified next-hop IP address is directly reachable on a local subnet. However, in complex service provider designs, the next-hop might be a
"distant" IP address that is reachable through another route (such as a BGP route or another static route). This process of looking up a next-hop within another routing entry is calledrecursive lookup.
In Junos OS, theresolve (Option A)parameter is explicitly used to enable this behavior for static routes.
According to Juniper technical documentation, when you append the resolve keyword to a static route configuration, you are instructing the Routing Engine to search the routing table to find a path to that distant next-hop.
For example:
set routing-options static route 10.1.1.0/24 next-hop 192.168.100.1 resolve If 192.168.100.1 is not on a local interface but is reachable via an OSPF route, the router will "resolve" the path and install the 10.1.1.0/24 route into the forwarding table using the OSPF path's exit interface.
Why other options are incorrect:
* Discard (Option B)andReject (Option C)are "next-hop types" used to drop traffic, either silently (discard) or by sending an ICMP unreachable message (reject).
* Next-table (Option D)is used forInter-VRF routing, where the router is told to look up the destination in a completely different routing instance (like a VRF table), which is a different architectural function than a recursive next-hop lookup within the same table.


NEW QUESTION # 132
What is the default route preference for an aggregate route?

Answer: C

Explanation:
In the Junos OS architecture,route preference(often referred to as administrative distance in other vendor platforms) is the primary metric used by the Routing Engine to select the "best" path when multiple protocols provide a route to the same destination. Each routing protocol and route type is assigned a default numeric value; the lower the value, the more preferred the route.
According to Juniper Networks technical documentation, anaggregate routeis assigned a default preference of
130. Aggregate routes are a form of static-like route used to group specific routes into a single, broader prefix to reduce the size of routing tables and limit the scope of routing updates. They are "protocol-independent" because they are not learned from a dynamic neighbor but are manually defined by the administrator.
To understand where130fits in the hierarchy, it is helpful to compare it with other common Junos preferences:
* Directly connected interfaces:0
* Static routes:5
* OSPF Internal:10
* IS-IS Level 1/2:15/18
* Aggregate routes: 130
* OSPF AS External:150
* BGP (Internal and External):170
* Generated routes:150
By setting the aggregate route preference to 130, Junos ensures that specific routes learned via IGPs (like OSPF or IS-IS) are preferred over the aggregate. This is essential because an aggregate route is often used as a
"catch-all" or a discard route when more specific path information is missing. If the aggregate had a lower preference (like 5), it might override dynamic routing information, leading to suboptimal routing or black- holed traffic.


NEW QUESTION # 133
By default, which routing table contains a list of all ingress LSPs?

Answer: A

Explanation:
In the Juniper Networks Junos operating system, the management of routing information is partitioned into several distinct routing tables (RIBs), each serving a specific architectural purpose. When dealing with Multiprotocol Label Switching (MPLS), understanding the distinction between inet.0 and inet.3 is fundamental for troubleshooting and traffic engineering.
Theinet.3routing table is specifically designed to store the egress IPv4 addresses ofLabel-Switched Paths (LSPs). When an ingress router successfully establishes an LSP (via RSVP or LDP), it places the host address of the egress router (the tail-end) into the inet.3 table. This table is not used for general packet forwarding; instead, it is primarily used by theBorder Gateway Protocol (BGP)for next-hop resolution. When BGP receives a route, it checks both inet.0 and inet.3 to resolve the next hop. If a matching entry exists in inet.3, the router knows it can reach that destination via an MPLS tunnel, allowing for the encapsulation of BGP traffic within MPLS.
In contrast,inet.0is the default unicast routing table used for standard IPv4 forwarding and contains routes learned via IGPs (OSPF, IS-IS) or static routing.inet.1is utilized for multicast forwarding (MBGP), andinet.2 is typically used for Multicast Source Discovery Protocol (MSDP) or RPF checks in multicast environments.
By isolating LSP egress points in inet.3, Junos prevents MPLS-specific paths from interfering with standard IGP path selection unless the administrator explicitly chooses to merge them (e.g., using the traffic- engineering bgp-igp command). Therefore, by default, the ingress router maintains its list of reachable LSP endpoints in inet.3.


NEW QUESTION # 134
Referring to the exhibit, which two statements are correct? (Choose two.)

Answer: B,D


NEW QUESTION # 135
......

Our JN0-364 study braindumps can be very good to meet user demand in this respect, allow the user to read and write in a good environment continuously consolidate what they learned. Our JN0-364 prep guide has high quality. So there is all effective and central practice for you to prepare for your test. With our professional ability, we can accord to the necessary testing points to edit JN0-364 Exam Questions. So high quality JN0-364 materials can help you to pass your exam effectively, make you feel easy, to achieve your goal.

New JN0-364 Exam Dumps: https://www.itpass4sure.com/JN0-364-practice-exam.html

P.S. Free 2026 Juniper JN0-364 dumps are available on Google Drive shared by itPass4sure: https://drive.google.com/open?id=1JRnxPnAkkXUHh70gcyQvLmI4lyfTwq0s