BONUS!!! ExamPassdump EDGE-Expert 시험 문제집 전체 버전을 무료로 다운로드하세요: https://drive.google.com/open?id=1AXF-hymaF_7rUEWdVbjNA1qyw3e_r3fW
우리ExamPassdump가 제공하는 최신, 최고의EDGE EDGE-Expert시험관련 자료를 선택함으로 여러분은 이미 시험패스성공이라고 보실수 있습니다.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Financial & Results Analysis | 10% | - Results and outputs of EDGE
|
| Topic 2: EDGE System Overview | 15% | - EDGE Certification Process
|
| Topic 3: Energy Efficiency | 25% | - HVAC Systems
|
| Topic 4: Software & Methodology | 25% | - Climate Zones & Weather Data
|
| Topic 5: Water Efficiency & Materials | 25% | - Materials Embodied Energy (EE)
|
ExamPassdump 제공 EDGE EDGE-Expert시험덤프자료가 광범한 시험준비인사들의 찬양을 받은지 하루이틀일이 아닙니다.이렇게 많은 분들이ExamPassdump 제공 EDGE EDGE-Expert덤프로 시험을 통과하여 자격증을 취득하였다는것은ExamPassdump 제공 EDGE EDGE-Expert덤프가 믿을만한 존재라는것을 증명해드립니다. 덤프에 있는 문제만 열심히 공부하시면 시험통과 가능하기에 시간도 절약해줄수있어 최고의 믿음과 인기를 받아왔습니다. EDGE EDGE-Expert 시험을 봐야 하는 분이라면ExamPassdump를 한번 믿어보세요. ExamPassdump도움으로 후회없이 멋진 IT전문가로 거듭날수 있을것입니다.
질문 # 81
In the EDGE software, the Base Case selection of external wall materials in hotels relies on information derived from:
정답：B
설명：
The EDGE software uses a Base Case to establish a benchmark for resource consumption, tailored to local conditions. The EDGE Methodology Report explains how the Base Case is constructed: "The Base Case for external wall materials in hotels is determined using data from market surveys of typical building practices in the project's country, supplemented by national building performance codes where available. This ensures the baseline reflects local construction norms and regulatory standards" (EDGE Methodology Report Version 2.0, Section 3.1: Base Case Determination). Option A matches this description by referencing typical building practices and national codes. Option B incorrectly refers to global practices and international codes, which EDGE does not use, as the software prioritizes local context. Option C, focusing on corporate specifications, is not part of the Base Case methodology, as the Base Case is standardized, not project-specific. Option D, involving local suppliers or accreditation, is irrelevant to how EDGE determines the Base Case, which relies on broader market data rather than supplier-specificinformation.
Reference:EDGE Methodology Report Version 2.0, Section 3.1: Base Case Determination; EDGE User Guide Version 2.1, Section 2.3: Using the EDGE App.
질문 # 82
How many measures need to be selected in order to meet the EDGE Energy Standard?
정답：C
설명：
In the EDGE system, compliance with the Energy Standard is not achieved by selecting a fixed number or a fixed percentage of measures. Instead, the project must demonstrate that the selected package of energy measures, when modeled in the EDGE software, achieves the minimum required energy savings compared to the local baseline. Because projects differ by climate, building type, geometry, and system choices, the number of measures needed can vary widely. One project might reach the target with a few high-impact measures, while another may need many smaller improvements.
At the same time, the curriculum explains that some measures are marked as required. These are mandatory prerequisites within the EDGE methodology and must be implemented where applicable. A project cannot claim compliance while omitting required measures. Therefore, while you may choose any combination of optional measures to reach the energy savings threshold, you must still implement all required measures as part of meeting EDGE requirements.
Options A, B, and C incorrectly imply a universal count-based rule. The only correct statement is that the project must implement at least all required measures, and then add any additional measures necessary to achieve the minimum energy savings target.
질문 # 83
When must the registration fee be paid?
정답：D
설명：
The EDGE certification process involves specific steps and fees, including a registration fee, to formally enter a project into the certification system. The EDGE Certification Protocol outlines the timing of the registration fee: "The registration fee must be paid prior to registration of the project in the EDGE system. This fee is required to activate the project in the EDGE App, allowing the Client to begin the self-assessment process and proceed toward certification" (EDGE Certification Protocol, Section 2.1: Registration). Option B, prior to registration, directly matches this requirement, as payment is a prerequisite for starting the certification process. Option A (prior to site audit) is incorrect, as the site audit occurs later, at the post-construction stage:
"The site audit takes place after practical completion, well after registration, so the registration fee is not tied to this stage" (EDGE Certification Protocol, Section 3.4: Post-Construction Requirements). Option C (after the registration) is also incorrect, as payment must precede registration: "Registration cannot be completed without payment of the registration fee, ensuring the project is officially entered into the system" (EDGE User Guide, Section 6.1: Project Preparation). Option D (after certification has been awarded) is wrong, as certification occurs at the end of the process, after registration and audits: "Certification fees may be paid after certification, but the registration fee is required at the outset, before any assessment begins" (EDGE Certification Protocol, Section 3.3: Certification Decision). The EDGE User Guide further clarifies: "Paying the registration fee prior to registration ensures that the project is formally recognized by the EDGE system, enabling access to the software and certification resources" (EDGE User Guide, Section 6.1: Project Preparation). Thus, the registration fee must be paid prior to registration (Option B).
Reference:EDGE Certification Protocol, Section 2.1: Registration, Section 3.4: Post-Construction Requirements, Section 3.3: Certification Decision; EDGE User Guide Version 2.1, Section 6.1: Project Preparation.
질문 # 84
During a design audit, an EDGE Auditor notices that the project does not meet the EDGE standard for energy.
Which of the following is an acceptable course of action for the Auditor?
정답：A
설명：
The role of an EDGE Auditor during a design audit (Preliminary Certification stage) is to verify compliance with the EDGE standard, which requires at least 20% savings in energy, water, and embodied energy in materials. If the project does not meet the standard, the Auditor must follow specific protocols without overstepping their role. The EDGE Expert and Auditor Protocols outline the acceptable actions: "If a project does not meet the EDGE standard for energy during a design audit, the Auditor should inform the Client of the shortfall and ask them to use the EDGE tool again to identify additional measures that will take the project comfortably over the EDGE standard (e.g., 20% energy savings). The Auditor must not provide design advice or modify the assessment themselves, as their role is to verify, not consult" (EDGE Expert and Auditor Protocols, Section 4.1: Audit Process). Option A, ask the Client to use the EDGE tool again to identify options that will take the project comfortably over the EDGE standard, directly aligns with this guidance, as it keeps the Auditor in a verification role while encouraging the Client to revise their design. Option B (contact the design team directly to work with them) is incorrect, as it violates the Auditor's independence: "The Auditor must not engage directly with the design team to improve the project, as this constitutes consultancy, which conflicts with their role as an independent verifier" (EDGE Expert and Auditor Protocols, Section 2.3:
Conflict of Interest). Option C (take no further action) is also incorrect, as the Auditor has a responsibility to report the shortfall: "If a project does not meet the EDGE standard, the Auditor must document the failure in the audit report and inform the Client, rather than abandoning the process" (EDGE Certification Protocol, Section 3.2: Audit Requirements). Option D (provide a list of measures based on the Auditor's experience) oversteps the Auditor's role by offering consultancy: "The Auditor cannot provide specific design recommendations or measures, as this compromises their impartiality; they must direct the Client to use the EDGE software or consult an EDGE Expert" (EDGE Expert and Auditor Protocols, Section 2.3: Conflict of Interest). The EDGE User Guide further supports: "During a design audit, the Auditor's role is to assess compliance, not to guide the design process; if the project falls short, the Client should revisit the EDGE tool to explore additional measures, potentially with the help of an EDGE Expert" (EDGE User Guide, Section
6.5: Working with EDGE Auditors). The EDGE Certification Protocol adds: "The Auditor's report should note the energy shortfall and recommend that the Client revise the self-assessment to meet the 20% savings threshold, ensuring the process remains Client-driven" (EDGE Certification Protocol, Section 3.2: Audit Requirements). Thus, asking the Client to use the EDGE tool again (Option A) is the acceptable course of action.
Reference:EDGE Expert and Auditor Protocols, Section 4.1: Audit Process, Section 2.3: Conflict of Interest; EDGE Certification Protocol, Section 3.2: Audit Requirements; EDGE User Guide Version 2.1, Section 6.5:
Working with EDGE Auditors.
질문 # 85
Which of the following protocols should be followed when the project city is not listed in the EDGE App?
정답：A
설명：
The EDGE App relies on location-specific climate data to calculate resource savings, but not all cities are listed. The EDGE User Guide provides guidance for such cases: "If the project city is not listed in the EDGE App, the user should choose the closest city to the project location that is available in the database. If necessary, the user can edit the climate data (e.g., temperature, humidity) to better reflect the project's actual conditions, ensuring accurate calculations" (EDGE User Guide, Section 2.2: Project Setup). Option B, choose the closest city and edit the climate data if necessary, directly matches this protocol. Option A (write to EDGE Certifier and wait) is incorrect, as this is not a required step: "Users are not required to request new cities; they can proceed by selecting the closest city" (EDGE User Guide, Section 2.2: Project Setup). Option C(select any city in the same climate zone globally) is too broad and inaccurate: "Choosing a city from a different region, even in the same climate zone, may lead to incorrect assumptions about local practices and climate" (EDGE Methodology Report Version 2.0, Section 3.2: Climate Data Inputs). Option D (choose the capital city) is also incorrect unless it is the closest: "The capital city should only be selected if it is the nearest available option in the database" (EDGE User Guide, Section 2.2: Project Setup). Thus, the correct protocol is to choose the closest city and edit climate data (Option B).
Reference:EDGE User Guide Version 2.1, Section 2.2: Project Setup; EDGE Methodology Report Version
2.0, Section 3.2: Climate Data Inputs.
질문 # 86
......
ExamPassdump에서 최고최신버전의EDGE인증EDGE-Expert시험덤프 즉 문제와 답을 받으실 수 있습니다. 빨리 소지한다면 좋겠죠. 그래야 여러분은 빨리 한번에EDGE인증EDGE-Expert시험을 패스하실 수 있습니다.EDGE인증EDGE-Expert관련 최고의 자료는 현재까지는ExamPassdump덤프가 최고라고 자신 있습니다.
EDGE-Expert예상문제: https://www.exampassdump.com/EDGE-Expert_valid-braindumps.html
그 외, ExamPassdump EDGE-Expert 시험 문제집 일부가 지금은 무료입니다: https://drive.google.com/open?id=1AXF-hymaF_7rUEWdVbjNA1qyw3e_r3fW