VCESoft的350-101資料的命中率高達100%。它可以保證每個使用過它的人都順利通過考試。當然，這也並不是說你就完全不用努力了。你需要做的就是，認真學習這個資料裏出現的所有問題。只有這樣，在考試的時候你才可以輕鬆應對。怎麼樣？VCESoft的資料可以讓你在準備考試時節省很多的時間。它是你通過350-101考試的保障。想要這個資料嗎？那就快點擊VCESoft的網站來購買吧。另外，你也可以在購買之前先試用一下資料的樣本。这样你就可以亲自确定资料的质量如何了。
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Automation and AI | 10% | - Automation technologies
|
| Topic 2: Wireless Client Connectivity | 30% | - Client access and security
|
| Topic 3: 802.11 Technology Fundamentals | 20% | - Wireless standards and operations
|
| Topic 4: Wireless Monitoring and Management | 25% | - Monitoring and troubleshooting
|
| Topic 5: RF Fundamentals | 15% | - RF characteristics
|
總體來說，VCESoft 的模擬試題還是比較實用的，知識點也比較明確，據廣大考生反應，真正的 350-101 考題都是我們考題網裡面的原題，而且題目的答案也比較隱晦一些，不懂不明白那個知識。或沒有認真看題目，是不可能選到正確答案的，如果你通過我們的 Cisco 350-101 考題模擬，就能在 350-101 考試中輕鬆過關，讓自己更加接近成功之路。
問題 #52
Refer to the exhibit. A WLC is deployed at a branch location to facilitate secure client connectivity.
A network engineer configures one WLAN using WPA2 Personal passphrase and activates ASCII format key to align with company security policies. Which configuration enables client authentication for this WLAN?
答案：C
解題說明：
WPA2-Personal authenticates clients with a preshared key, not with 802.1X. Cisco documents WPA/WPA2 as supporting multiple authentication methods, including 802.1X and PSK, and specifically states that when PSK is selected, a preshared key or passphrase must be configured.
The configuration element that enables client authentication in this scenario is the PSK ASCII key function represented by option D. On Catalyst 9800 IOS XE, the PSK method is enabled with PSK authentication key management, and the passphrase is defined with security wpa psk set- key {ascii | hex} {0 | 8} password; Cisco's example is security wpa psk set-key ascii 0 test.
Option A disables 802.1X AKM, which is appropriate for Personal mode, but it does not by itself authenticate clients. Option B controls DHCP proxy behavior and has no role in WPA authentication. Option C enables AES for WPA2 encryption, which protects traffic confidentiality but does not supply the authentication secret.
問題 #53
A network administrator at a marketing company is deploying a Cisco Catalyst 9800 Series Wireless Controller running Cisco IOS XE 17.x. The corporate WLAN named XYZ-Guest supports visitor devices. To address intermittent connectivity issues due to client association limits and short session timeouts, the network administrator must optimize the WLAN to allow more client connections and extend session timeouts for the devices. The administrator must set the maximum number of clients for the XYZ-Guest WLAN to 50 and must set a session timeout to prevent frequent device disconnections. Which two commands must be configured on the controller? (Choose two.)
答案：B,C
解題說明：
The maximum client association limit is configured under the WLAN to control how many clients can connect to that WLAN. The session timeout is configured under the wireless policy profile to extend the allowed client session duration and reduce frequent disconnections.
問題 #54
Refer to the exhibit. A network engineer is deploying a new Cisco 9800 WLC and is performing the Day-0 setup. The IP address and subnet mask have been assigned to the management interface, and network connectivity between the WLC and the upstream switch has been verified.
Which CLI command must the engineer use next to configure management access?
答案：B
解題說明：
After assigning an IP address to the management interface of a Cisco 9800 WLC, the next step in Day-0 deployment is configuring the default route to ensure management traffic can reach devices outside the local subnet. The correct command is ip route 0.0.0.0 0.0.0.0 <gateway>, which establishes a default route for all traffic destined for networks not explicitly known in the routing table. In this case, ip route 0.0.0.0 0.0.0.0 10.1.10.1 sets the upstream router at 10.1.10.1 as the default gateway, allowing the WLC to communicate with the broader network for management and client services.
問題 #55
A network administrator at a marketing company is deploying a Cisco Catalyst 9800 Series Wireless Controller running Cisco IOS XE 17.x. The corporate WLAN named XYZ-Guest supports visitor devices. To address intermittent connectivity issues due to client association limits and short session timeouts, the network administrator must optimize the WLAN to allow more client connections and extend session timeouts for the devices. The administrator must set the maximum number of clients for the XYZ-Guest WLAN to 50 and must set a session timeout to prevent frequent device disconnections. Which two commands must be configured on the controller? (Choose two.)
答案：C,D
解題說明：
On Cisco Catalyst 9800 Series WLCs running IOS XE 17.x, WLAN-specific client management parameters are configured under thewlan configuration context. To increase the number of client connections on the XYZ- Guest WLAN, the correct command iswlan XYZ-Guest 1 XYZ-Guest client association limit 50(orclient max- association 50depending on IOS XE version), which explicitly sets the maximum number of clients allowed per AP on this WLAN. To extend session durations and prevent frequent disconnections, theclient session timeoutcommand is applied under the same WLAN context with the desired timeout in seconds, e.g.,wlan XYZ-Guest 1 XYZ-Guest client session timeout 2800.
Profile-based session commands (options B and D) are part of wireless policy profiles, which define broader policy elements like QoS, radio settings, and security, butdo not directly enforce client association limits or session timeouts on the WLAN itself. Configuring these parameters at the WLAN level ensures that all APs associated with this WLAN apply the limits and timeout settings consistently. This approach aligns with Cisco best practices forClient Connectivity Configuration - WLAN client limits, session management, and IOS XE WLC optimization for guest networks.
問題 #56
Refer to the exhibit. A network administrator is working on a WLC to enable user access for contractor desktops using WPA2-Enterprise using EAP-TTLS. The administrator verified the external authentication configuration and now must test network connectivity. Which code snippet must be added to the box in the code to complete the configuration on the WLC that supports authentication with an external server?
答案：C
解題說明：
The missing command must create the RADIUS server group context before the existing server name external-radius command can bind the defined RADIUS server into that group. Cisco's Catalyst 9800 802.1X configuration workflow shows the exact CLI sequence: define the RADIUS server, then enter aaa group server radius <radius-grp-name>, then add server name <radius- server-name>. The Catalyst 9800 configuration guide likewise states that the RADIUS server- group identification is created with aaa group server radius server-group, followed by the server name assignment.
In this exhibit, external-radius is already declared under radius server, and aaa authentication dot1x CLIENT_GROUP group RADIUS-GRP already points the 802.1X method list to the server group named RADIUS-GRP. Therefore, the box must contain aaa group server radius RADIUS- GRP so that server name external-radius is syntactically valid and functionally associates the external server with the group. Cisco also identifies dot1x authentication lists as the AAA method type used for 802.1X SSIDs, with "group" directing authentication to an external RADIUS server.
問題 #57
......
我們VCESoft Cisco的350-101的考題按照相同的教學大綱，其次是實際的Cisco的350-101認證考試，我們也是不斷的升級我們的培訓資料，你得到的所有產品高達1年的免費更新，你也可以隨時延長更新訂閱時間，你將得到更多的時間來充分準備考試。如果你還為了要不要使用VCESoft這個網站的培訓資料而感到困惑或者猶豫不決，那麼你可以先在VCESoft網站裏下載部分關於考試的試題及答案，免費試用，如果它很適合你，你可以再去購買也不遲，保證你絕不後悔。
350-101認證指南: https://www.vcesoft.com/350-101-pdf.html