100% Cisco 300-425 Correct Answers | 300-425 Exam Experience

BONUS!!! Download part of PDFDumps 300-425 dumps for free: https://drive.google.com/open?id=1_LCS4TncrBOYI5JOq_-qLxoxABzYr3xF

Your privacy and personal right are protected by our company and corresponding laws and regulations on our 300-425 study guide. Whether you are purchasing our 300-425 training questions, installing or using them, we won’t give away your information to other platforms, and the whole transaction process will be open and transparent. Therefore, let us be your long-term partner and we promise our 300-425 Preparation exam won’t let down.

Cisco 300-425 Exam Syllabus Topics:

Section	Weight	Objectives
Wireless Site Survey	25%	- Perform post-deployment site survey - Collect design requirements and evaluate constraints 1. Access point type 2. Deployment type 3. Real-time applications 4. Client density 5. Security - Perform pre-deployment site survey - Describe material attenuation and wireless impact - Utilize planning and analysis tools 1. Ekahau 2. Prime Infrastructure 3. AirMagnet 4. Chanalyzer 5. Spectrum Analyzer - Perform predictive site survey - Perform and analyze Layer 1 site survey
Wired and Wireless Infrastructure	30%	- Determine logical infrastructure requirements 1. WLC licensing 2. Wireless architecture selection - Design wireless bridging 1. Ethernet bridging 2. Modes of operation 3. Workgroup bridge and roaming - Apply wireless network design requirements 1. Location services 2. Data 3. Voice and video 4. Hyperlocation - Determine physical infrastructure requirements 1. Grounding 2. Access point power 3. Cabling 4. Mounting 5. Switch port capacity - Design radio management 1. RxSOP 2. RRM 3. RF profiles - Design high-density wireless networks 1. Conference rooms 2. Campus 3. Lecture halls
WLAN High Availability	20%	- Design high availability for access points 1. Access point prioritization 2. Fallback configuration - Design high availability for controllers 1. Link Aggregation Group 2. Stateful Switchover 3. Anchor controller redundancy
Mobility	25%	- Validate mobility tunneling 1. Data path 2. Control path - Optimize client roaming - Design mobility groups based on roles

>> 100% Cisco 300-425 Correct Answers <<

300-425 Practice Test Training Materials - 300-425 Test Prep - PDFDumps

All these three Cisco 300-425 exam questions formats are easy to use and perfectly work with all devices, operating systems, and the latest web browsers. The Designing Cisco Enterprise Wireless Networks (300-425) PDF dumps file is the collection of real and updated Designing Cisco Enterprise Wireless Networks (300-425) exam questions that are being presented in PDF format. You can install 300-425 Pdf Dumps file on your desktop computer, laptop, tab, or even on your smartphone devices. Just install the 300-425 PDF dumps file and start Designing Cisco Enterprise Wireless Networks (300-425) exam preparation anywhere and anytime.

Cisco Designing Cisco Enterprise Wireless Networks Sample Questions (Q155-Q160):

NEW QUESTION # 155
A wireless engineer is performing a post verification of a wireless network. Which two metrics does the engineer verify to ensure that the wireless network can support voice services? (Choose two.)

A. The rate of retransmitted packets must be 15 percent or below.
B. The client device must have at least an -67 dBm RSSI.
C. The client device must have at least an -65 dBm RSSI.
D. The coverage area must have a noise floor that does not exceed -87 dBm.
E. The rate of retransmitted packets must be 20 percent or below.

Answer: B,E

Explanation:

NEW QUESTION # 156
A customer is running a guest WLAN with a foreign/export-anchor setup. There is one anchor WLC in the US and two in Europe. Anchor WLC priorities are used to prefer local anchors. During a routine network audit, it is discovered that a large number of guest client sessions in the US are anchored to the WLCs in Europe. Which reason explains this behavior?

A. The US anchor WLC failed and recovered.
B. The US anchor WLC is anchored to itself with a priority value of zero.
C. The foreign WLC failed and recovered.
D. The anchor WLC is in the same mobility group.

Answer: A

Explanation:
The behavior of guest client sessions in the US being anchored to the WLCs in Europe despite the presence of a local anchor WLC can be explained by the failure and subsequent recovery of the US anchor WLC. During the failure, the guest sessions would have been transferred to the European WLCs. After recovery, if the priority settings were not correctly restored or if the system did not automatically revert back to the local anchor, the sessions would remain anchored to the European WLCs3.
CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide Premium Edition and Practice.

NEW QUESTION # 157

Refer to the exhibit. During a post Mesh deployment survey, an engineer notices that frame collisions occur when MAP-1 and MAP-3 talk to RAP-2 Which type of issue does the engineer need to address in the design?

A. exposed node
B. backhaul latency
C. hidden node
D. co-channel interference

Answer: C

Explanation:
Explanation
https://www.cisco.com/en/US/docs/solutions/Enterprise/Mobility/emob30dg/WiMesh.pdf

NEW QUESTION # 158
How does AP failover priority for access points function when configured with priority 1 or 4?

A. When configured with priority 4, the access point is assigned with the highest priority level and it is marked as critical. This access point fails over before other access points with the lower priority when there is primary controller failure.
B. When configured with priority 1, the access point is assigned with the highest priority level and it is marked as critical. This access point fails over before other access points with the lower priority when there is primary controller failure.
C. When configured with priority 1, the access point is assigned with the medium priority level and it is marked as medium. This access point fails over after other access points with the higher priority when there is primary controller failure.
D. When configured with priority 4, the access point is assigned with the lowest priority level and it is marked as low. This access point fails over after other access points with the higher priority when there is primary controller failure.

Answer: A

NEW QUESTION # 159
A customer has this wireless design:
- two Cisco Catalyst 9800 Series wireless controllers configured in a
high-availability SSO cluster to manage APs in the local office network
- 100 APs in local mode and registered to the high-availability cluster
- one Catalyst 9800 Series wireless controller that is deployed as an
anchor in a DMZ
- Cisco ISE for user authentication and authorization
The customer wants to deploy a new SSID to support staff BYOD devices and authenticate users via Cisco ISE. The SSID terminates on the anchor WLC. How must the requirement be incorporated into the design to address the AAA servers for the WLAN?

A. Send the accounting traffic from the high-availability cluster and the authentication traffic from the anchor WLC.
B. Send the AAA server accounting and authentication traffic from the anchor WLC.
C. Send the AAA server accounting and authentication traffic from the high-availability cluster.
D. Send the accounting traffic from the anchor WLC and the authentication traffic from the high- availability cluster.

Answer: B

NEW QUESTION # 160
......

The Cisco 300-425 certification exam is a valuable asset for beginners and seasonal professionals. If you want to improve your career prospects then 300-425 certification is a step in the right direction. Whether you’re just starting your career or looking to advance your career, the Cisco 300-425 Certification Exam is the right choice.

300-425 Exam Experience: https://www.pdfdumps.com/300-425-valid-exam.html

What's more, part of that PDFDumps 300-425 dumps now are free: https://drive.google.com/open?id=1_LCS4TncrBOYI5JOq_-qLxoxABzYr3xF