New 100-150 Test Registration, 100-150 Key Concepts

What's more, part of that PracticeVCE 100-150 dumps now are free: https://drive.google.com/open?id=1R3CGPSpMjwV80Q7vMUFsml2l5FB-C11c

Our 100-150 learning materials prepared by our company have now been selected as the secret weapons of customers who wish to pass the exam and obtain relevant certification. If you are agonizing about how to pass the exam and to get the 100-150 certificate, now you can try our learning materials. Our reputation is earned by high-quality of our learning materials. Once you choose our training materials, you chose hope. Our learning materials are based on the customer's point of view and fully consider the needs of our customers. If you follow the steps of our 100-150 Learning Materials, you can easily and happily learn and ultimately succeed in the ocean of learning.

Cisco 100-150 Exam Syllabus Topics:

TopicDetails
Topic 1
  • Diagnosing Problems: Covers structured troubleshooting approaches, packet capture with Wireshark, common diagnostic commands, remote access methods, and basic Cisco show commands.
Topic 2
  • Infrastructure: Covers hands-on identification of Cisco hardware, physical cabling in network setups, port types, and the basic concepts behind routing and switching.
Topic 3
  • Standards and Concepts: Covers foundational networking models, terminology, network types, cloud service models, and common application-layer protocols.
Topic 4
  • Addressing and Subnet Formats: Covers the distinction between public and private IP addressing, IPv4 subnetting, and IPv6 address and prefix formats.
Topic 5
  • Endpoints and Media Types: Covers physical cabling types, wireless and wired transmission technologies, endpoint device categories, and OS-level network configuration across multiple platforms.

>> New 100-150 Test Registration <<

100-150 Key Concepts | 100-150 Reliable Test Prep

The PracticeVCE is committed to making the Cisco 100-150 certification exam preparation simple, smart, and successful. To achieve this objective PracticeVCE is offering top-notch and real 100-150 exam questions in three different formats. The names of these Cisco Certified Support Technician (CCST) Networking (100-150) exam questions formats are PDF files, desktop practice test software, and web-based 100-150 practice test software.

Cisco Certified Support Technician (CCST) Networking Sample Questions (Q23-Q28):

NEW QUESTION # 23
How is the following IP address written when using CIDR notation?
Address: 192.168.0.16
Subnet Mask: 255.255.255.240

Answer: B

Explanation:
The subnet mask 255.255.255.240 contains 28 network bits, so the address is written in CIDR notation as 192.168.0.16/28.


NEW QUESTION # 24
Which device protects the network by permitting or denying traffic based on IP address, port number, or application?

Answer: C

Explanation:
Firewall: A firewall is a network security device that monitors and controls incoming and outgoing network traffic based on predetermined security rules. It permits or denies traffic based on IP addresses, port numbers, or applications.
Access Point: This is a device that allows wireless devices to connect to a wired network using Wi-Fi.
It does not perform traffic filtering based on IP, port, or application.
VPN Gateway: This device allows for secure connections between networks over the internet, but it is not primarily used for traffic filtering based on IP, port, or application.
Intrusion Detection System (IDS): This device monitors network traffic for suspicious activity and policy violations, but it does not actively permit or deny traffic.
Reference: Understanding Firewalls: Firewall Basics


NEW QUESTION # 25
Computers in a small office are unable to access companypro.net. You run the ipconfig command on one of the computers. The results are shown in the exhibit.
You need to determine if you can reach the router.

Which command should you use? Complete the command by selecting the correct options from each drop- down lists.

Answer:

Explanation:

Explanation:
To determine if you can reach the router, you should use the ping command followed by the IP address of the router. The ping command is a network utility used to test the reachability of a host on an Internet Protocol (IP) network and to measure the round-trip time for messages sent from the originating host to a destination computer.
The Default Gateway in the ipconfig results is typically the router's IP address in a home or small office network. In this case, the Default Gateway is 192.168.0.1, which is the address you would ping to check connectivity to the router.
References :=
* How to Use the Ping Command
* Testing Network Connectivity with the Ping Command
To determine if you can reach the router, you should use the ping command with the IP address of the router.
* Command: ping
* Target: 192.168.0.1
So, the completed command is:
* ping 192.168.0.1
Step by Step Comprehensive and Detailed Explanation:
* ping: The ping command sends ICMP Echo Request messages to the target IP address and waits for an Echo Reply. It is commonly used to test the reachability of a network device.
* 192.168.0.1: This is the IP address of the default gateway (the router) as shown in the ipconfig output.
Pinging this address will help determine if the computer can communicate with the router.
References:
* Using the ping Command: ping Command Guide


NEW QUESTION # 26
During the data encapsulation process, which OSI layer adds a header that contains MAC addressing information and a trailer used for error checking?

Answer: A

Explanation:
During the data encapsulation process, the Data Link layer of the OSI model is responsible for adding a header that contains MAC addressing information and a trailer used for error checking. The header typically includes the source and destination MAC addresses, while the trailer contains a Frame Check Sequence (FCS) which is used for error detection1.
The Data Link layer ensures that messages are delivered to the proper device on a LAN using hardware addresses and translates messages from the Network layer into bits for the Physical layer to transmit. It also controls how data is placed onto the medium and is received from the medium through the physical hardware.
Reference: =
The OSI Model - The 7 Layers of Networking Explained in Plain English
OSI Model - Network Direction
Which layer adds both header and trailer to the data?
What is OSI Model | 7 Layers Explained - GeeksforGeeks


NEW QUESTION # 27
A host is given the IP address 172.16.100.25 and the subnet mask 255.255.252.0.
What is the CIDR notation for this address?

Answer: D

Explanation:
The mask 255.255.252.0 has 22 contiguous one bits (16 from the first two octets plus 6 from the third), which corresponds to a /22 prefix.


NEW QUESTION # 28
......

Our 100-150 exam prep has already become a famous brand all over the world in this field since we have engaged in compiling the 100-150 practice materials for more than ten years and have got a fruitful outcome. You are welcome to download the free demos to have a general idea about our 100-150study questions. Since different people have different preferences, we have prepared three kinds of different versions of our 100-150 training guide: PDF, Online App and software.

100-150 Key Concepts: https://www.practicevce.com/Cisco/100-150-practice-exam-dumps.html

What's more, part of that PracticeVCE 100-150 dumps now are free: https://drive.google.com/open?id=1R3CGPSpMjwV80Q7vMUFsml2l5FB-C11c